• We've upgraded our forums. Please post any issues/requests in this thread.

Search results

  1. G

    ATITool problems with Graphics card

    I've got an annoying problem with ATITool that I want resolved. I've got a EVGA Nvidia Geforce 6600 LE 256 Mb memory, and ATITool Version 26. ATiTool works just fine with my Radeon X1050, but the problem is, it only has shader 2.0 and my Geforce has a 3.0 So, when I use ATITool with my Geforce...
  2. G

    PC will not boot at all.

    Well, in the process of trying to figure out all this other crap, I've fitted it with a new fan, It should do the trick, and not shake it half as much... But, also, the fan before, when ever the power to the PSU was disconnected and Reconnected, the fan did spin at 100% speed, and was Spinning...
  3. G

    PC will not boot at all.

    I didn't mention this before, but I did have a bit of a problematic fan. one of the blades on the fan had broken. Gave my finger a right nasty cut, Hehe. But you know how when fans are a bit broken, they shake wildly? Could that have been the culprit? Maybe making the CPU shake a bit too much...
  4. G

    PC will not boot at all.

    Yeah, we'll see how it goes. I do have access to a machine that blows pure air into anything. It's quite powerful as well. Cleaned out my 360 to almost new. Should have seen how much dust was in it. It's an 8 hour drive for access (Grandpa has it..) but I'll see about heading to him for some...
  5. G

    PC will not boot at all.

    I did. Everything unplugged. But for some reason, I've plugged back in the original PSU and if works fine now, the only problem is, I've read that others have had the same problems, and everything has screwed up like my computer. Then eventually it worked for them. But a few hours or even weeks...
  6. G

    PC will not boot at all.

    Well, I've discovered something. After sticking my other PSU in, everything unplugged, it worked. The power light went on, the PSU fan turned on. But the strange thing is, this is the PSU that the computer screwed up with in the first place. Wtf?
  7. G

    PC will not boot at all.

    No, nothing works. The fans don't spin, the hard drives dont work, nothing. Could it even be my Power Switch?
  8. G

    PC will not boot at all.

    Tried it from another outlet, no extension cord, I've tried unplugging everything aside from the actual Mobo, still. Nothing. I'm about to try another PSU to see if that works, and then I'll report back, But I still don't know
  9. G

    PC will not boot at all.

    I have not actually tried that, I might try that now to see, but I dunno..
  10. G

    PC will not boot at all.

    Nothing at all is on. There is no light on the PSU to tell em whether it's working or not... Even with my other PSU, no lights or anything. Is there a chance that both of my Power Supplies are dead?
  11. G

    PC will not boot at all.

    It's one of the newer models, newer as in it's about 3 years old. It's a compaq Presario SR1811NX to be specific, and yes it does need the 4 pin for the CPU. I'm actually wondering if it could be the Mobo, or the CPU. But it seems unlikely that it would be working fine one second, then the next...
  12. G

    PC will not boot at all.

    I've done everything that would cause it to not work. I've turned on the switch at the wall, turned on the switch on the PSU, and I've actually amde sure it is plugged into the mobo, so I've got no clue what it could be..
  13. G

    PC will not boot at all.

    So I recently got this problem with one of my PC's. It has been working fine ever since we got it about 3 years ago (So it's not TOO old) Just today, it was running fine, then...dead... Completely stopped working. Monitor turned off, fans stopped moving, hdd stopped working, everything except...
  14. G

    Overclocking Radeon 9550?

    So I have a question about my 9550. I actually asked a question recently about why my card froze at 500 Mhz. It was answered in full detail, But I want to know: If I decrease the size of the Mhz of the Memory clock, would that allow me to increase the Core Clock? Or is 480 Mhz as high as the ATI...
  15. G

    Card Freezes when over clocked to 500 Mhz?

    I'll check it out.
  16. G

    Card Freezes when over clocked to 500 Mhz?

    Yeah, my computer is crap. But again, I am planning on building, or at least having on customized online, and I will take these cards into consideration. But I'm can't really do it right now until I get more money, I just wanted to know if I could get the card to be better, and It's apparent...
  17. G

    Card Freezes when over clocked to 500 Mhz?

    But for the time being, I will ask if any of you know a good (Cheap) card that will play Crysis on Low with at LEAST 20 FPS Thats pretty specific, I know, but you can generalize it a bit. Otherwise, I don't need any more help, Unless anyone knows if there is a way to Force the MOBO to allow AGP 8X
  18. G

    Card Freezes when over clocked to 500 Mhz?

    Well, my actual motherboard doesn't support the power supply anyways, so I will need a new motherboard sooner or later. I'm actually thinking about just buying a new computer. Which would solve all of these problems, Hehe.
  19. G

    Card Freezes when over clocked to 500 Mhz?

    I have plenty of Case fans. I have a really powerful one as my Main Exhaust fan, and a secondary one down (Taped) on the bottom, and I have some of the from panelling off, so that it can suck the air right through the entire Machine. When I open the case, it's never very hot in there. So, if the...
  20. G

    Card Freezes when over clocked to 500 Mhz?

    I figured I would have to, yes. I already have a 550 Watt Power supply, RAM is not that expensive, usually, but I didn't know I would need a new case. Do you think switching out my Power supply with the 550 Watt would allow the card to do more? Or is is JUST the card?
  21. G

    Card Freezes when over clocked to 500 Mhz?

    I am bothered by the fact that my board will only allow my card to go up to X4, is there any way I can force it to X8? If not, any recommendations on a new motherboard?
  22. G

    Card Freezes when over clocked to 500 Mhz?

    Oh, and the stock core clock is 250 MHz, though the GPU is the same as a 9600 so, it should be at 300 Mhz
  23. G

    Card Freezes when over clocked to 500 Mhz?

    I'm not entirely sure what type of motherboard I have. All I know is that the system is a Dell Dimension 8200 With 400 MHz Front Side bus.
  24. G

    Card Freezes when over clocked to 500 Mhz?

    I've got an Daimond S120 Radeon 9550 With 256 MB DDR Ram, which is supposed to be a X8 AGP aperture, but only workd as a X4, I dunno what going on there, tut hats not my main question (I would like that one answered though...) My main question is, My Card freezes up when ever I overclock it to...