• We've upgraded our forums. Please post any issues/requests in this thread.

Search results

  1. K

    Need suggestions for shiny black case paint

    thanx, man. i'll pick some up.
  2. K

    CPU temp sensor defective, RMA???

    Sorry guys for the late reply, i havent been around lately. Yes, i did resolve it. And im not even sure how. I belive that clearing CMOS might have done it. I also followed UncleWebb's instructions for the CPU Cool Down Test and the temps started changing when i ran Prime95 and the test for a...
  3. K

    Need suggestions for shiny black case paint

    can you recomend something specific that would be good for a case? Edit: Found High Performance Wheel Clear Coat on Duplicolor's site, will that do the trick?
  4. K

    Need suggestions for shiny black case paint

    Guys, i'm going to paint the interior and the back of my new TT Armor+ case black and i need some paint that is more shiny and glossy to better match the factory paint job. I got a can of Duplicolor High Performance Wheel Coating in black as MKmods recomended and tested it out but its a very...
  5. K

    CPU temp sensor defective, RMA???

    ah, i see. I also ran the sensor test in Real Temp but i'm not sure if i understand the results. It kept putting different load levels on the CPU but the temp remained the same so i'm not sure if i passed or failed.
  6. K

    CPU temp sensor defective, RMA???

    No, i havent but i will try it now, good suggestion :toast: thnx, will try that next. good to see you back, Hellas, i see they let you back on :toast: If all else fails i will attempt to RMA, though it could be the mainboard like Intel said but it performs flawlessly so i doubt...
  7. K

    CPU temp sensor defective, RMA???

    I had the Intel e8600 for several months now and every program i used to measure the temps for both cores always reads constant 39C, whether its idle or load, overvolted or undrvolted.The general CPU temp does change when i use Everest to monitor temps but the cores never. So i think that the...
  8. K

    Did Cooler Master lie about HAF 932 dimensions????

    Look at my post above with the link to Cooler Master USA and look at the specs and you'll see 22.7" lenght, no offense, but i'm getting tired of answering this question. It is often the case that companies make different versions of products for different regions. I've seen this happen several...
  9. K

    Did Cooler Master lie about HAF 932 dimensions????

    Thanx for posting and taking out the time to measure. It appears that yours in a non-US version this is why its only 22.2" I did remeasure withb the finger hook groove and its a bit longer but still not near close enough to 22.7" I have taken a picture that i attached but that the measurement is...
  10. K

    Did Cooler Master lie about HAF 932 dimensions????

    i intend to, as soon as i find someone to hold the tape measure, i cant photograph & measure at the same time. Also, anyone with this case plz confirm or deny what i sed.
  11. K

    Did Cooler Master lie about HAF 932 dimensions????

    those are not the dimensions on cooler master USA: http://www.coolermaster-usa.com/product.php?category_id=18&product_id=2810 or newegg: http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160&Tpk=cooler%20master%20haf%20932 In fact the sizes you are posted are still off...
  12. K

    Did Cooler Master lie about HAF 932 dimensions????

    I read that review prior to purchase, in fact i read about 5, and not 1 review actually caught this provided they are all like this and mine is not a defect. I will take picture in a little while so you all can see this, i just need someone to hold the tape measure while i photograph.
  13. K

    Did Cooler Master lie about HAF 932 dimensions????

    wait, thats the height you are asking for, its 21-1/4" but thats not the issue, it the lenght is or am i missing something?
  14. K

    Did Cooler Master lie about HAF 932 dimensions????

    Good advice, thnx. Still, i want to rule out that its defective, thats why i want HAF owners to measure their cases.
  15. K

    Did Cooler Master lie about HAF 932 dimensions????

    I just got my HAF 932 case several days ago to replace my TJ09 and the first thing i noticed after taking it out of the box is just how short it is. You gotta understand that my TJ09 is almost 24" long so after looking at it for 2 years and being used to such a long case this was the first thing...
  16. K

    [FS] TheGoat Eaters FS thread - great stuff :D

    cool, i've been thinking of getting another e8600. how high does it clock on air/water and at what voltage?
  17. K

    Cpu Pll??

    Its a Phase-locked loop. This wiki article explains exactly what it is: http://en.wikipedia.org/wiki/Phase-locked_loop
  18. K

    NVIDIA nForce 980a SLI Reference Platform Motherboard Pictured

    Yea, i agree with cdwall. Corei7 is not the only game in town. And those of us that want some variety not to mention somewhat lower prices brought to us due to some healthy competition look to what AMD has to offer as well. Because Intel is being such a bitch there is just one chipset supporting...
  19. K

    VIA Demos First Em-ITX Board with VIA Nano Processor at ESC Silicon Valley

    Is that 4 D-Sub ports i see? Thats a lot of displays for that little board :eek:
  20. K

    NVIDIA nForce 980a SLI Reference Platform Motherboard Pictured

    yay! finally some AM3 competition for the ATI chipsets. Though 980a sounds weird should've been 790a or something. I wonder whats gonna happen when they make the 900 series chipsets and 980a name is already taken up?
  21. K

    PSU Form Factor in Antec Minuet?

    TFX, never heard of it, lol. What's that?
  22. K

    Finally! Permission to build!

    Agreed, thats a sick deal. I'm getting my own HAF 932 soon as well, been actually planning to for a few months but had some cash problems. Really a perfect case for both air and water. As i said above, if you get it dont forget to make your own custom filters as it gets quite dusty i hear.
  23. K

    Sapphire 4850 bsod on new install

    Glad you got this fixed. i too thought it had to be the card after you tried the above suggestions with drivers & Vista updates but with no luck. Well, i hope it serves you well and dont forget to overclock it :toast:
  24. K

    System Stucks While "auto-detecting Ide Hard Drives"

    This is a pretty good guide on how to create a bootable USB key and flash the BIOS with it. Unfortunately, all the pictures are gone but still a good guide: http://www.hardforum.com/showthread.php?t=1200939