Loads have done it without issue
You can run a 6950 and 6970 in CF anyway
^^^^ want to share that Bios?
install Msi afterburner
Change your ram clocks to 1350 and see if this fixes things
This is odd. I think my fans speed was to low. I just did another run @20+ and had no issues...
Have you tested at +20?
Dropped my Ram to 1350 (25mhz) and put slider to +20
No artifacts although it made no difference to perfromance in heaven wether the slider was...
Not sure what do.
Wether I should flash back to 6950 and run @ +20 all the time or
Keep the 6970 bios and run 0% all the time.
+10 atifacts too.
I don't run it long enough to get temps but at 0% temps are 64c when running Heaven
Works fine a 0%
I'm getting artifacts in Heaven when I run at +20
Having said that its modular. whats the difference in using a molex and 8 pin adaptor the cards come with?
6970 users are not all running...
Mine is an Enermax Liberty 620w with 2 x 6 pin PCI-e connectors...
So can you see it being an issue?
There seems to be some scaremongering going on with regards to the 8 pin and 6 pin power connectors of the 6970 and the fact the 6950 has 2 x 6...
I really hope this flash is successful 24/7 its still early days on what if any problems may arise
Nice work W1zzard :)
Can I just clarify that running +20 is fine for gaming and benching on a day to day basis.
I have a 620w Enermax Liberty PSU
Do you think they will be hardware cut in future cards?
I have the Sapphire and the flashed went well.
I have zero issue in Heaven and 3D mark
Now going to test some games!
Separate names with a comma.