• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Search results

  1. S

    Ryzen DRAM Calculator by 1usmus

    I'll give the A1/B1 a shot, individually and combined? and see what happens. I haven't noticed anything in the slot, I looked with a flashlight, tried a little compressed air from a can, just in case.
  2. S

    Ryzen DRAM Calculator by 1usmus

    Ok, so started the testing, this is what I've got so far. In Slot A2, *both* sticks POST by themselves, with XMP on, at 16-19-19-39-58 1T. The PMU error is not present when there is only 1 stick in A2. In the BIOS both sticks when in A2 show their SPID info. So, now do I try each stick in slot...
  3. S

    Ryzen DRAM Calculator by 1usmus

    Ok, so in Windows/CPUZ it says there's 32gb of memory, but in the BIOS it says there's only 16GB, what does that mean?
  4. S

    Ryzen DRAM Calculator by 1usmus

    Ok, I tried what you put in your screenshots (in regards to only changing those settings) and put the DRAM voltage on the max recommended setting from the calculator. Still no luck, it just crash/reset after I hit Save/Exit and rebooted and when I got back into the BIOS the settings were still...
  5. S

    Ryzen DRAM Calculator by 1usmus

    Did you do anything to these, they aren't in your screenshots but I'm not sure if they need to be changed too, from the AMD Overclocking section? DDR and Infinity Fabric VDDP Voltage VDDG Voltage Precision Boost Overdrive (PBO)
  6. S

    Ryzen DRAM Calculator by 1usmus

    Thank you TheLostSwede that's a massive help, I didn't realize you could leave so much set to Auto, I changed like everything it said and then CPU Vcore the guide said "Up to 1.32v should be fine" but it starts at 1.2 so I had no clue what to set it to (as an example of things that weren't clear...
  7. S

    Ryzen DRAM Calculator by 1usmus

    Is there anyone here who could give a novice a hand? This is my first build in like a decade and I bought the memory I did because I wasn't comfortable with doing timings manually and several places I read/watched said this was a good kit to just stick in, set xmp, and go. Unfortunately it won't...
Top