• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Search results

  1. L

    Ryzen 3900x bios settings

    i m using everything on auto except for dram volt 1.35, soc volt 1.1, xmp profile 1 (3600) and the others timing settings for the ram suggested by@ tabascosauz this is ryzen master and zentimings screenshot i also set ryzen balanced power management now i m running memtest64 and prime95...
  2. L

    Ryzen 3900x bios settings

    unbelivable mine during bmw test is stuck at 4.00 ghz with all cores finishing in 1min 56 sec (done right now with bios on default and only dram 1.35) your in bmw test is going at 4.20 ghz with all cores finishing in 2min 21 sec on blender official page our cpu shuold use 100 sec to finish...
  3. L

    Ryzen 3900x bios settings

    hardware info or now i got ryzen mester or openhardware i think is called today i ll try cpuz but everyone reports the same speed at the end i compare render time and there i see 20-25 more sec 120 of my 3900x against 100 of official blender page... and the speed during render stays fixed for...
  4. L

    Ryzen 3900x bios settings

    prime95 with ram at 3200, ratio 4.25 ghz, 1.30 vcore, 1.35 dram voltage crashes after 40 min now i restore default and set only v core to 1.25 and dram to 1.35 render time slow, 4.00ghz prime95 crash again after about 40 min what do you mean with cpu speed and temps under control? and...
  5. L

    Ryzen 3900x bios settings

    when i finished building my pc i got crash with reboot while rendering caused by ram so i set dram voltage to 1.35 and it fixed it, than i set 3200 at ram speed and it is still ok but when i set 3600 with no other changes it crash i don t want to mess around with anything of bios setting but...
  6. L

    Ryzen 3900x bios settings

    f4-3600c16d-32gtznc cl 16-19-19-39 1.35v i think that mine are these https://www.gskill.com/product/165/326/1562840211/F4-3600C16D-32GTZNCTrident-Z-NeoDDR4-3600MHz-CL16-19-19-39-1.35V32GB-(2x16GB)
  7. L

    Ryzen 3900x bios settings

    ok if others specs of my ram are needed to understand the right settings i ll give to you but you have to specify what you want to know about my ram yesterday i tested with tabascosauz ram settings but before i laoded defaults in bios...and it worked (render times are again very high) then i...
  8. L

    Ryzen 3900x bios settings

    i have found it!!
  9. L

    Ryzen 3900x bios settings

    ok for now pc doesn t crash while render but cpu stay under 4.00 ghz and render time is high now i try cpu ratio 4.30 and cpu vcore 1.31 still can t find how to disable power down mode... now with these new settings cpu ratio 4.30 and cpu vcore 1.31 crash under load trying 4.20 and 1.298
  10. L

    Ryzen 3900x bios settings

    i didn t check but i have a Mobo : x570 aorus elite and ram are 2 ddr4 tridentz neo 3600 16gb are they incompatible with each other? i found on this page...
  11. L

    Ryzen 3900x bios settings

    manual soc to 1.1 you mean vcore soc?? inside advanced timing control i don t have tCl value i have tCWL , is that one?? or tcl is cas latency? i found all the other these are my two doubt.. yes i was asking that because of the vcore and cpu ratio changes 4.3 ghz and 1.31 V i m using this for a...
  12. L

    Ryzen 3900x bios settings

    i didn t check but i have a Mobo : x570 aorus elite and ram are 2 ddr4 tridentz neo 3600 16gb are they incompatible with each other? i found on this page https://pangoly.com/it/recensione/gigabyte-x570-aorus-elite/compatibilita/memoria-ram that my ram is compatible with my mobo ok i ll try...
  13. L

    Ryzen 3900x bios settings

    my temp under load are around 80°, isn t that good? i was thinking that i have to find out by myself the right timings...but now i understand that i can copy yours, is that right?? no i only change dram voltage to 1.35
  14. L

    Ryzen 3900x bios settings

    so i still don t know if cpu clock ratio 4.3 and cpu vcore at 1.31 are safe settings and if there are other change to be made?? the core boost to 4.5-4.6 ghz for really short time so i don t think that loosing single core performance is really a big deal but with these setup render time...
  15. L

    Ryzen 3900x bios settings

    my ram are 2 ddr4 tridentz neo 3600 16gb so xmp is going auto to 3600 but system shut down under load. i can try 1.45 max dram voltage if it is safe or just leave at 3200 at stock values cpu isn t limited at all in voltage or speed, everything is set to auto, but my bench are bad, under...
  16. L

    Ryzen 3900x bios settings

    my temp is around the 80°, not too bad i think, the problems are: 1 the cpu doesn t boost over 4.00 ghz and render time is too much (100 sec against my 120 sec of render time) 2 i cant set ram to 3600 but only 3200 or system will shut down under load.. so i set ram at 3200 and dram voltage at...
  17. L

    Ryzen 3900x bios settings

    hi i have an update: i can t set ram at 3600, the system shut down while rendering, i also try with more dram voltage but the problem appears again. also i have installed new cpu cooler with better temp around 80° on load but no increase in benchmark. really strange.. cpu stay just under 4.00...
  18. L

    Ryzen 3900x bios settings

    i ll watch some videos on how to do that...thank you for the advise what cooler are you using? it seems doing its job i don t understand why ram voltage isn t setting right at the beginning or in auto mode so everytime i build a pc have i to set it manually ? with both intel and amd cpu ?? if...
  19. L

    Ryzen 3900x bios settings

    good! for now it seems to be working well!! WOW i have also increased fan syst speed in bios of the exaust back fan so if i want to increase ram speed i have to use always 1.35 for voltage? i ll wait for the cooler to see if benchmark score increases because for now my render time with cpu are...
  20. L

    Ryzen 3900x bios settings

    I have 2 ddr4 tridentz neo 3600 16gb so is rigt 1.35 or should i put more? and should i use amd perfomance or balanced profile in the power managemnt? i m asking because it is the only other thing that i ve changed
  21. L

    Ryzen 3900x bios settings

    Sorry this is not my screen shot, just an expample.. I did nothing in bios, only update and set ram profile this is a shoot of my bios so if I get system shutdowns again i ll set: cpu clock control or cpu clock ratio on 41 is it ratio right?? (and then if pc is stable for a week can i try 4.2...
  22. L

    Ryzen 3900x bios settings

    Good morning now ram are set to default profile.. if games or blenderbench cause reboot again should I try a static oc? I ll set clocking core to 4.1 and cpu volts at 1.350v , are these the only two value to change? see image please or should I change also the memory voltage to 1.350v even if...
  23. L

    Ryzen 3900x bios settings

    for now with new cooler setting and stock bios setting, i ve only see a little cpu boost but temps seems ecual. later i ll see if it shuts down again so is right to update bios??
  24. L

    Ryzen 3900x bios settings

    So I shouldn't have updated the bios... I updated bios but I have a backup of the first one...can I reload that? Sorry I understand, I was asking if lowering voltage and setting a fixed clock core speed may or not invalidate warrenty...? Do you mean ram's memory volts at 1.35v ? How is called...
Top