• We've upgraded our forums. Please post any issues/requests in this thread.

Search results

  1. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    Hello anatolymik, yesterday, after installing a new hard drive in my system, after some mbr problems, i have to reinstall hypersli. before i used 0.96. This time, after installing latest nvidia whql drivers, i install hypersli 1.0 and all rune just fine, no bsod, all is good, thks for your...
  2. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    yes with 4 modules it's the same problem on P45 i have to tweak and downclock to 1003 to have very stable memory. Chipset can't support 4 modules at full speed.
  3. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    @anatolymik After Two days i have the same bsod during surfing on web and drivers wil never work again i re install 306.97, the latest working.
  4. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    @anatolymik I had problem with nvidia drivers 310.xx but yesterday i try to install 314.14 beta drivers , graphics drivers only and they works, directly i can setup sli on, and after reboot they continue to work perfectly. THKS
  5. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    h4x24 for me 306.97 is the last drivers i can install without problem on my p5q-E in Win 7 64bit, i can instal 313.96, setup sli, run somme game (example far cry 3 with good perfs gain in sli, the two gpu works correctly), all is good but if i reboot i have bsod. I say that to anatolimik, but...
  6. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    I see on nvidia site your cards don't have sli connector, they are not SLI compatible with hypersli sorry for you.
  7. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    You must have your two cards linked by a SLI Bridge, without it you can't activate SLI with HyperSli ! like this one : http://www.nordichardware.com/skrivelser_img/432/sli.bridge.jpg like this http://www.erenumerique.fr/images/cartemere/20060302/sli_bridge.jpg
  8. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    bridge ? Did you have a sli bridge installed ? it's necessary to have sli now
  9. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    two differents cards My system work wuth hypersli with 2 differents GTX260 card one is 65nm first 216 shaders card and the other is 55nm with 216 shaders two. I hear sometime about a men with a GTX260 192 and a GTX 216 working in sli. See at this link perhaps it can apply to GTX460...
  10. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    bsod on 310.90 the thing that i can t understand is the fact that after install 310.90 and set sli on i can play farcry 3 with very good perf 90% improvement until i reboot when i obtain bsod at start
  11. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    bsod hypersli 0.96 is in hardware mode hypervisor enabled
  12. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    bsod in 310.90 i install bitdefender 2013 same thing always bsod with 310.90 after reboot i install the 313.96 drivers but i obtain the same bsod but during install and after reboot nvidia drivers are not installed. here i turn on 306.97 no problem but no good sli in farcry 3
  13. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    bsod on 310.90 anatolymik , i try this i disable antivirus of bitdefender total security 2012 i install 310.90 with new install without 3dvision all ok. I activate SLI. all ok. I reboot first time no problem. I reboot a second time, the same bsod I restart in no hypersli windows...
  14. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    bsod on 310.90 hello, anatolymik, today when i start my computer i have the same bsod with 310.90 I thinks there is perhaps a problem with bitdefender or my config with hypersli 0.96.
  15. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    bitdefender anatolymik i have to say that after hypersli 0.96 was installed. i could set bitdefender without problem it s just for install. now my system seem stable if i don t install 3dvision no more bsod. my set of gtx 260-216 was made of one 65nm and one 55 nm perhaps the problem. i try...
  16. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    try with differents drivers To anatolymik. This evening i try this. I install hyper sli 0.96 on 306.23 try sli, works fine sli off in nvidia control panel then install 306.97 in new install without 3d vision Sli on, works fine sli off then install 310.33 in new install without 3dvision...
  17. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    Bsod 310.90 hello anatolymik, My system spec are : Asus P5q-E P45 chipset Core2Quad Q6600 @ 3.2Ghz 2 GTX 260-216 in sli with sli bridge (all ok until 306.23 included) 8 Go Ram SSD and HDD Windows 7 SP1 64bit This is the bsod after new install of 310.90 drivers after 306.23 with...
  18. G

    HyperSLI (Enabling SLI on non-sli motherboards)

    Not work with any 310 driver Hello, I update to hypersli 0.96 but can't start sli with any of 310 driver i obtain a bsod on my P5q-E. i return to 306.23 and no problem. When i install hypersli 0.96 i have to stop my bitdefender. with bitdefender stopped i can install it but there is...