• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Search results

  1. V

    Seagate Giveaway: IronWolf 125 960 GB SSD

    I need the Seagate IronWolf 125 960 GB SSD because ARK survival evolved keeps growing and therefore consuming more disk space!
  2. V

    Nothing but BSODs, fresh Zen3 build.

    I could say the same about Intel with the amount of open security vulnerabilities :laugh: Very immature if you gain performance at the price of security. The newer AGESA revisions adds functions like BAR, Curve Optimizer and improved memory support for newer RAM dies. But you see them as...
  3. V

    Nothing but BSODs, fresh Zen3 build.

    You only tested 3 bioses according this thread. 1401 Beta 1602 AGESA 1.1.0.0 Patch B -> 1202 Did you even try 1004?, I asked you before never got a respond. If you have a motherboard brand which releases lots of beta's and recalled them often, I would have my doubts about if they can even...
  4. V

    Nothing but BSODs, fresh Zen3 build.

    No doubt about it, you are Dutch. Complaining a lot :laugh: I think you still could tried a few things before throwing the towel.
  5. V

    Nothing but BSODs, fresh Zen3 build.

    Try to set it to 1.05v ~1.10v fixed instead of offset.
  6. V

    Nothing but BSODs, fresh Zen3 build.

    Can you share a screenshot of ZenTimings? I am currious about the SOC voltage as well.
  7. V

    Nothing but BSODs, fresh Zen3 build.

    Did you even try bios version 1004? Please post a screenshot of ZenTimings since it is very important to have the correct memory configuration. Too high auto voltages can also cause an instable system :laugh:
  8. V

    Nothing but BSODs, fresh Zen3 build.

    Horror stories? I am one of the early adopters with Ryzen :laugh: The first generation was the only generation which had major memory issues. Those were solved with newer AGESA versions But I think Asus is the culprit of your issues. Can you try to downgrade to bios version 1004?
  9. V

    Nothing but BSODs, fresh Zen3 build.

    Can you install all ram sticks and create a screenshot with ZenTimings? (https://zentimings.protonrom.com/)
  10. V

    Cooling VRM's

    If you VRM is really running hot, you can try one of these. VRM exhaust cooling shroud 120mm - https://www.thingiverse.com/thing:2569219 120mm VRM Duct - http://www.thingiverse.com/thing:1492961 140mm x 55mm Duct - http://www.thingiverse.com/thing:2208560 140mm x 40mm Duct -...
  11. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    Did you make a screenshot of the working configuration with zentimings? If some parts are still on auto they can change with every boot and give you an unstable system when you least expected. Which kind of stress tests do you use to validate your system? Another tip is when you are going to...
  12. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    Gold sample processor vs Brons sample processor. Its the silicon lottery when buying. If you are truely unlucky you can even get a Stone sample processor :rolleyes: It doesnt almost allow you to overclock but still operates within the specification of the processor manufacturer.
  13. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    Still no guarantee it will work at 3600MHz. Its part of the silicon lottery. If you are unlucky the integrated memory controller is not stable at 3600MHz with four dual rank sticks. For someone which is asking for help you're quite stubborn. Please test it with just two dimm's installed to see...
  14. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    Maybe you should read the notes listed on top of the QVL: https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_CROSSHAIR-VIII-HERO_WI-FI/Memory_QVL_for_AMD_Ryzen_3000_X570-4DIMM.pdf
  15. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    You got this wrong. The motherbord is certified but your processor isnt formally specified to run memory at 3600MHz with 4 dual rank sticks at all! Your 3950X only support 3200MHz with 2 dimms. Everything above 3200MHz is OVERCLOCK. No guarantee it will work. With 4 dimms installed the...
  16. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    You are comparing something which isnt comparable. Did your previous memory kit use the same dram chips? Most likely not. Did the kit ran at the same speed? I guess no since 3000MHz memory kit != 3600MHz memory kit You dont really know if it is stable at 3600MHz. When you just use 2 sticks...
  17. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    Why should Karmal disable Gear Down mode? If Gear Down Mode is enabled the system will be more stable. @Karmal Did you already had time to test it with just 2 sticks installed?
  18. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    If you use only 2 sticks out of 4, do you still have issue?
  19. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    You only get random reboots when the system is idle? How long do you stress the system?
  20. V

    ASUS Crosshair Hero VIII (Wi-FI) Beta BIOS / FW 3101

    Can you post the full ram configuration. Without it, nobody can help you on this forum.
  21. V

    HyperX Fury RGB 32GB DDR4 3200MHz

    After the bios update you still need a Ryzen 5000 and a RX6000 graphics card to get it working :rolleyes: CLKDrvStr = 24 (if it doesnt work properly, try a higher value like 30 or 40) AddrCmdDrvStr = 20 CsOdtDrvStr = 20 CKEDrvStr = 24
  22. V

    HyperX Fury RGB 32GB DDR4 3200MHz

    Any luck to gain more stability with adjusting the CAD Bus?
  23. V

    HyperX Fury RGB 32GB DDR4 3200MHz

    CLKDrvStr, AddrCmdDrvStr, CsOdtDrvStr, CKEDrvStr
  24. V

    HyperX Fury RGB 32GB DDR4 3200MHz

    What do you mean without changing othe values? I hope you still are using the ProcODT, RttNom, RttWr and RttPark values which was provided earlier?
Top