• We've upgraded our forums. Please post any issues/requests in this thread.

Search results

  1. [MD]Phantom

    HD 4870 watercooling block ??

    Idle temps: Catalyst control center 41 'C Everest ultimate edition Diode MemIO 52 'C Diode Shader 46 'C Diode DisplayIO 44 'C Load temps used 3Dmark06 Catalyst control center 53 'C Everest ultimate edition Diode MemIO 70 'C Diode Shader 62 'C Diode DisplayIO 60 'C
  2. [MD]Phantom

    HD 4870 watercooling block ??

    Indeed this PCB does not look like any of the four others.
  3. [MD]Phantom

    HD 4870 watercooling block ??

    After getting in real close with my card it turns out it is not 4870 REFEERENCE PCB DESIGN VER,2 Nore any other of the four known PCB designs. Ill make some pics this weekend EK waterblocks is also interessted in pictures of my PCB.
  4. [MD]Phantom

    HD 4870 watercooling block ??

    Hello, i am searching for an fullwaterblock for my graphics card. It's a Asus HD4870 1GB Darkknight edition. I have spend several hours looking for an full block for this one but no luck so far. I hope any one knows where to find one. The card is an 4870 REFEERENCE PCB DESIGN VER,2...
  5. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    Sorry for my bad english but that's just what i was trying to say AMD does not use FSB. Intel did, until Nehalem apperently.
  6. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    Not arguing at all. :respect: But wat i said was not false, but is true if you do not consider OC'ING the system. But enough off that. Is his mainboard a next gen motherboard??, and from wich piont is it a next gen board. I have a asus p4c800-e deluxe, but i dont think that's a new...
  7. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    Without overclocking, the Memory will run on DDR400, even if it is DDR500 you put into it. And you cannot argue with that. That overclocking makes it run faster, i know that.:rockout: My cpu would have run faster but my memory could not catch up, after passing the 3,6 GHZ. Was...
  8. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    @ blaznjason, If this is the board you mean, http://www.asus.com/products.aspx?l1=3&l2=15&l3=68&l4=0&model=1119&modelmenu=2 Then the highest speed ram it will use is ddr400, the only option is to check if there is a bios update that makes it work on ddr500 but i doubt it. So buying...
  9. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    Not quiet, there are many people how still have a AGP based system, and a lot of manufacturers know this. Making an HD3850 work on AGP costs not only time but money, and they would never do this if they where not sure if it would earn them a buck or two. @ Innocent Criminal, I remember...
  10. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    Damn i had the same problem wit XP and sata disk, Did solve it but trying to remeber how......:banghead: Something had to be changed in BIOS. As i remember, In IDE configuration screen, you have to set Enhanced mode support to S-ATA and Configure S-ATA as RAID to NO So is it...
  11. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    @ Morgoth, Yes i know, Still 20FPS in crysis does not seem a lot to me, then again i never have played crysis yet. @ Intel igent, I was afraid you where gonna say that the quality does not matter to mee i only need more frames in Call of duty 4 Multiplayer. So ill save the money and...
  12. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    With the current configuration i get 2330 3dmark06 points,( a little overklock ) I got with the 7950GT about double that about 4400 pionts 3dmark06 But in call of duty 4 i get with the current configuration around 50-60 FPS average and sometimes drops too 20-30 fps, and thats just to low...
  13. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    @ innocentcriminal, Did you only change the motherboard ??, if yes: try switching youre ram dimms one at a time, if this does not work the motherboard is probably faulty. @morgoth, Ty for the reaction. But just getting one is not exactly an answer to the question, it will cost me...
  14. [MD]Phantom

    3850 AGP OC'ing, Vmods, experiences, suggestions, where to buy

    Maybe some one off you could help me with this question. I have a AGP based system, i am going to upgrade when the new Nehalem stuff is coming out. But until then i want too give my old system a little boost. I have a P4 3,4 Ghz HT prescott processor a Asus p4c800-E deluxe mainboard...
  15. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    So you had some BAD expirence with them right?. Well i always mention BAD expirereances to poeple if it is regarded too the hardware or software. If it is more like personal feelings for the hard or software i do also but with the information that I did not like it, not that it is faulty...
  16. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    It is just me or??????:confused:
  17. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    Check this review and maybee you'll change youre mind.;) http://www.overclock3d.net/reviews.php?type=3&id=98&page=1&desc=xspc_plexi_bay_reservoir__black_
  18. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    Hmmm don't think it would fit me no, i already found interesting reservoirs. The XSPC 5.25 bay reservoir. http://www.chilledpc.co.uk/shop/product_info.php?cPath=42&products_id=216 and the reviews i read about it where good too, and i like seeing the water so i can check it without...
  19. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    Here is the review, witch is about the swiftech micro reservoir. http://www.rbmods.com/Articles/Swiftech/Mcres_micro/1.php Testing: Our testing results show that you get a very quiet system with this tank, it has a type of design that makes it run very quiet you don't get as much...
  20. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    I have looked at the swiftech reservoir but they have a little temperature issues in bigger watercooling installations as it seems. So i have decided too go with two XSPC 5.25 bay Reservoir's. Only 1 question left, how about the size for the fittings and tube?. 1/2 or 3/8. Al the...
  21. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    I see you are right, damn. Oh well ill start googling again. Thanks.;)
  22. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    Finally, i then have al the info i need. Solution, 1 Loop EK Supreme, Thermochill PA120.2, Thermaltake Aquabay M3, Laing DDC-1T. 2 Loop ( Gpu block ) Thermochill PA120.2, Thermaltake Aquabay M3, Laing DDC-1T. Thank you al for the info, im very gratefull. When i have the setup...
  23. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    I still wasn't sure about the head needed for a EK supreme. So i sen't them an e-mail too ask, this is they'r answer. Hi! I suggest about 1,7 m is enough. Best regards, Eddy So that's a lot less than i tought around 5.58 feet if my calculations are right. Considering that there...
  24. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    Oke i am trying too understand this, If you have a high restriction block, you need a high pressure pump. The pressure is like this, 3,8 mHead for a DDC 1T. But it has got nothing too do with the flow rate, like 400Liter/Hour But how do you tell wich is a high restriction block and...
  25. [MD]Phantom

    Naturally Aspired PC WaterCooling Club

    Here is a nice review on the L30 and this guy says that it would bee even strong enough for a high pressure block, go figure what's right and wrong.:confused: http://www.gruntville.com/reviews/wc/hydor_l30/index.php And here another one, http://www.overclockers.com/articles723/