• We've upgraded our forums. Please post any issues/requests in this thread.

Search results

  1. M

    Sabertooth 990fx r2 and hyperx beast

    Hi guys, Can i use my mb with Kingston hyperx beast 1866? They are supported? If yes, with 1866mhz?
  2. M

    Strange Temp problem... Maybe... i should call an exorcist?

    regardless of cooler position, 65C full prime95 at 4.1 i understand about the CM but how can a piece of metal be defective?? the fan run fast and if it was defective horizontal or vertical... it should always be defective! Moreover with previous motherboard all was fine... uff...
  3. M

    Strange Temp problem... Maybe... i should call an exorcist?

    UPDATE i've just tested the stock cpu cooler: in all positions i get same coretemp
  4. M

    Strange Temp problem... Maybe... i should call an exorcist?

    i'm using CM backplate, if i try to put pressure on the heatsink is the same thing
  5. M

    Strange Temp problem... Maybe... i should call an exorcist?

    nono! exactly reverse! holy s**t i don't understand
  6. M

    Strange Temp problem... Maybe... i should call an exorcist?

    ----> OK if i rotate it <- 90° (psu at the top of the case) i get the fail
  7. M

    Strange Temp problem... Maybe... i should call an exorcist?

    cooler master centurion 532, but with the previous motherboard (M5A87) i've never had this problem. However, case or not, what's the difference between the two positions? 40C????? Seriously i don't understand, i'm testing my system for hours... uff...
  8. M

    Strange Temp problem... Maybe... i should call an exorcist?

    I tighten all the fan screws to the motherboard, same thing... :confused:
  9. M

    Strange Temp problem... Maybe... i should call an exorcist?

    Houston, we've got a problem... Sabertooth 990FX rev2 fx-8320@4.1 hyper 212 evo well, this is a very strange thing.... with the case in vertical (normal position) Coretemp on prime95 48C with the case in horizontal position Coretemp on prime95 90C + and safe reboot. one question... why?
  10. M

    Motherboard only show 8176mb DDR3

    ah ok! but uhm.. it's strange! thank you!
  11. M

    Motherboard only show 8176mb DDR3

    Hello! I've got a question: my new motherboard (Sabertooth 990FX rev2) only see 8176mb of DDR3 instead 8192 in uefi. In windows (cpu-z) i see 8192 and each xms3 is 2048. It's all normal?
  12. M

    AMD Releases Catalyst 13.2 Beta Targeting Crysis 3 MP Beta, Frame Latency Issues

    50% with DmC? OMG! AMD is learning "how to make drivers" these days!
  13. M

    fx-8320, problem with prime95, vcore and overclock

    finally got Sabertooth 990FX rev2.0 :p
  14. M

    fx-8320, problem with prime95, vcore and overclock

    thank you guys! i ll buy a new motherboard soon!
  15. M

    fx-8320, problem with prime95, vcore and overclock

    the sabertooth is too much expensive for me, university don't gave money to us eheh! what do you think about this?: Gigabyte GA-970A-UD3 AM3+ socket Support for 32nm AMD FX-Series 4-core, 6-core and 8-core processors (Bulldozer and Piledriver core) Support for existing AM3 Phenom II...
  16. M

    fx-8320, problem with prime95, vcore and overclock

    i ve added a passive coolers on my vrms one month ago. this system, at that time, ran well without any problems. However, should i re-buy my motherboard? :cry:
  17. M

    fx-8320, problem with prime95, vcore and overclock

    i'm thinking about the VRMs... with stock multiplier the vcore range is ok, no initial boost and no vdrop.
  18. M

    fx-8320, problem with prime95, vcore and overclock

    if i enable llc i see vcore 0.9-~1.32 :cry: seriously, i've never had this problems
  19. M

    fx-8320, problem with prime95, vcore and overclock

    unfortunately in my motherboard llc is ---> enable, disable, auto
  20. M

    fx-8320, problem with prime95, vcore and overclock

    well, after a few tests with: 1) in bios i set 1.36 in vcore 2) disabled turbo core, cool n quiet, c states, llc 3) windows 8 x64 in performance mode i see: 0% load cpu ---> cpu-z(or aida) vcore 1.4 multiplier 21x 100 load cpu ---> cpu-z(or aida) vcore 1.288-1.304 (why????) multiplier...
  21. M

    fx-8320, problem with prime95, vcore and overclock

    well, i don't understand. I've disabled cool n quiet and c states. Now i see this (1.320-0.92)
  22. M

    fx-8320, problem with prime95, vcore and overclock

    vcore fluctuate between 1.3 and 0.92! it's a huge fluctuation! :wtf: i think it's strange! what does it means??? update 1: after setting auto to northbridge clock, i can see vcore more stable, between 1.368-1.352... strange?
  23. M

    fx-8320, problem with prime95, vcore and overclock

    thanks for the reply but, do you think it could depends to the strange course of my vcore? 1.3-09 ?!?! i think it's strange! If i disable turbo core and LLC it's the same thing
  24. M

    fx-8320, problem with prime95, vcore and overclock

    thank you!! i'll try for 2-3 hrs occt and intel burn test!
  25. M

    fx-8320, problem with prime95, vcore and overclock

    and what is the software can i use to say "okay! now all it's good!"??