• We've upgraded our forums. Please post any issues/requests in this thread.

Search results

  1. T

    Dram Voltage up to VTT +.0.5v Help

    Need some help on this one.Current System I7 920(Do) Oc@ 3.8ghz.Need help on the vtt settings.I have read that it is safe to run Dram voltage up to VTT + 0.5. I am a little confused on this one.System is ruuning fine.If any improvements on voltages let me Know.Please find attached info.Is vtt...
  2. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Hi N-ster.No luck so far. mem set@ 1810mhz 7-7-7-20 1. mem voltage 1.7v vtt@ 1.3v .vtt@1.32v,vtt@ 1.3v = boot failure. 2. mem voltage 1.72v vtt@ 1.3v, vtt@1.32v vtt @1.3v= boot failure. Also in advance dram feature in bios, do I set performance enhance to standard/turbo or extreme.because...
  3. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    The wintec is rated @ 1.9 volts.I will give it a go @ 1.7v and cross my fingers.I just spent 1 hr cleaning the dust off the heatsik and fans.I also untightened the two screws on the heatsink and gave it a couple of little twists then retightened the two screws,but it did not help lower idle...
  4. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Thats a worry! coudl that damage ram memory at that high voltage and as for increasing vtt will that also increase temps?Sorry for being a pain.
  5. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    ok no go an all fronts.Volatage set @1.64 1.1810@7-7-7-21 boot fail waning due to overclock voltages 2.1810@7-7-7-20 as above 3.1810@7-8-7-21 as above 3.1810@7-8-7-20 beeping computer (fast long peeps) 4.1810@7-8-7-23 as above 5.1810@7-8-7-24 boot fail warning due to overclock voltages...
  6. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    so tRC 35 = 21+7+7? currently 34
  7. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    currently tRC is set @ 34.What should i set that @.does tRC 20 sound ok or leave as it is.
  8. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Ok. I will try the above settings and keep you informed.
  9. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Good morning N-Ster or should I say good afternoon.Idle temps are good this morning due to room temp @19. 40 41 40 40c. I will join the club soon as thermal paste arrives.What frequency should I set memory at 7-7-7-20.and which tRAS level is better 20 or 21.And regarging the unicore bug,do you...
  10. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    latest update set vcore @1.2v 15min ITB test @ max = stable.Temps have improved see attached. idle temps high but that does not realy matter at the momment.room temp is 23c.warm night.Fantastic weather/walked the dog,lovely day. Under 70C? with LLC it is 1.2V but with higher temps? makes no...
  11. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    I noticed in some tutorial that the original person mentioned there is some intel logic bug that requires you to set unicore 2x+1(x17 instead of x16) instead of just 2x. After doing that, he was able to do much better at his overclocking ventures. this maybe true because when I set unicore on...
  12. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Ok.Thank you.Whats a few watts anyway.I need aircon running in this room.computer is warming it up.The room never gets to cool down anyway its on 16 hrs a day.wife,me and the kids.The thing never stops.Any way look at Aida64 specs attached
  13. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    as you said mx-2. re voltage difference.could it be cpud error reading? outide temp is 27c romm temp is 24-25 getting warm.I will go for 191x21 ,but not until I re-apply thermal paste i have to order it not available in my area.only paste available is artic silver 5.I will now test using...
  14. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Ok finally everything is stable running @ max IBT,temps are higher using IBT @ max. see attached.LLc @lev 2. vcore @1.225v vtt @1.28v maem @1.6v.what to you think re temps. and should i use prime95 I will order IC diamond 7 and re apply before oc @ 4ghz.so far so good.
  15. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    sorry for changing LLC.I will be happy if cpu life for 3-4 years.I will do as I am told.Master N-ster. I am doing a virus chack beacause the word around here is that a virus is stating it is virus protection and people .it is infecting alot of computers and computer servicing people are flat...
  16. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    update.vore@1.237v( cpuz states 100% @1.168v & idle @ 1.2v) vtt@1.28v mem@1.6v. Other settings are:C1E disabled/EIST disabled/unicor clock disabled set @ x16(2x mem) qpI pll @auto/qpi link set @ auto/cpu pll@1.8v do I need to adjust IOH it's set @auto(1.100) I set LLC to standard becaue...
  17. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    I will go with the pea 5mm method. great youtube video.Well done!
  18. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Looking on you tube I have seen some one recommending 4 core system the horizontal line across the chip but I fully trust your opinion
  19. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Also when applying thermal paste is the 5mm pea size without spreading or the horizintal line or x spread without spreading ,wich is the best way.I use the pea thin credit card method? wtv you wanna call yourself lol ? customer... your not getting paid but I think you should. Did you...
  20. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Latest update.I decided to go for 3.8gh for now until I try tighten up the 2 screw on the mount,if that does not work I will try OCZ Freeze if available,if not I will try artic silver 5 avilable at most stores.I will also try in order as n-ster stated. I have the 4ghz bug and would like to join...
  21. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Ok ihad alot of drama today.I was all over the place .so i set vcore to 1.268v.cpu pll @1.8v.qpi/vtt @1.2v .Stress tested using IBT. normal test pass.high test pass.Load @ 100% are very high 83c85c 79c 80c .idle temps are high 43 44 45 45c room temp 24c.too high for my liking. I think i will go...
  22. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    Do I leave llc @level 2 and memory voltage to I leave that @1.64v or auto as for IBT 2.5 is that for core 2 systems?
  23. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    OK I set it @191x21 advanced cpu core feature -advanced turbo boost tech -enabled advanced memory sttings-performance enhance-standard to turbo bsod vcore @1.12 at bootup set vcore @1.225 boots up ok but abit slow,will prime test soon.and let you know. The thing is why do you have to have...
  24. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    earlier on you told me to disable turbo is that correct.Cpuz statea 3.8ghz 191x20
  25. T

    i 920 Over Clock @ 3.36 ghz.memory timing OK?

    cannot get x21 to stick,every time I reboot it goes back to x20.I tried to oc to 4ghz 191x21 and also 181x21 with no luck.tried it three times.