1070 asus turbo

[Fearofthemrak]

I got my self an 1070 for cheap that video out was not working(guy used it in sli config) and i found a guy who say that he can fix thr hdmi qproblem for me. He was not succesful so i decided to use mine 3400g apu and to use its hdmi for picture and to use gpu for rendering the games. I put everything togeder and i got error 43. System post everytime without any problem. I opened the card to check everything even cleaned it with breaker cleaner, reheating it and still same problem, the guy who i gave the card try to solder it again and that is what i can see different about it. I download the gpu z and when i switch to 1070 it display nothing(picture downbelow) i think that he tryed also so flash the bios and he was unsucesful. Ehat do you think about all of this?

 

[FreedomEclipse]

I think that the card has the wrong bios

 

[Fearofthemrak]

I also have a picture when i got it where it was reconised before i gave it to a guy to be fixed

 

[Caring1]

The device ID shown in GPU-z is definitely not that of an Asus Turbo 1070.
It is either a Manli, or Zotac Bios that has been flashed on to your card.

Try this one:

Asus GTX 1070 VBIOS

8 GB GDDR5, 1506 MHz GPU, 2002 MHz Memory

www.techpowerup.com

 

[Fearofthemrak]

The device ID shown in GPU-z is definitely not that of an Asus Turbo 1070.
It is either a Manli, or Zotac Bios that has been flashed on to your card.

Try this one:

Asus GTX 1070 VBIOS

8 GB GDDR5, 1506 MHz GPU, 2002 MHz Memory

www.techpowerup.com

I am trying all night to reflash it i am getting this, so what i did is downloaded the rom run with cdm nvflash64 -6 (name of rom) and enter and this is ehat is happening
I also did --protectoff and i also get some weird things(second picture)

 

[Caring1]

If the Eeprom isn't being detected you may have to use a CH341a Programmer for it.

How to use CH341A - YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

www.youtube.com

 

[Fearofthemrak]

If the Eeprom isn't being detected you may have to use a CH341a Programmer for it.

How to use CH341A - YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

www.youtube.com

I will order the tool online and wait for it, do you have some more recomendation what to do?

 

[Fearofthemrak]

So i got a 1070 that i think bios was altered i tryed nvflash could not flash it so i ordered the ch341a usb programer but i when i loaded the bios chip(which i think that is bios chip) programer load to 20% the code a say completed when i read the code it dint change then i eraced everything from chip(made a back up of last codes) to write new code it says error 3 am i missing here something?
Its the 1070 asus turbo edition

 

[Caring1]

You "think" it was altered, or you know it was altered?
Do you have screenshots of GPU-z prior to flashing?
What issues where you having with the card before?

 

[Fearofthemrak]

You "think" it was altered, or you know it was altered?
Do you have screenshots of GPU-z prior to flashing?
What issues where you having with the card before?

Yes i uploaded the picture, i figgured that this cable that i bought is not the best quality