I have an msi z690-a pro wifi motherboard.. i've had a hard time so far getting this to be cooler with the aio x73 kraken and ddr5 c40 5200mhz corsair.
although at this point i think the issue is the "watercooler" setting in the bios, i think changing to boxed will lower the wattage limits and make it better. I'm going to retry with this change later on and see if that brings this down.
I have it at 5.1 fixed and 3.9 and 3.9 on the ratio along with bios volts around 1.28v and llc is tight, i think 2 or 3. Cinebench will avg 88 but hit 100c at times.
What ratios are most setting and what voltages on average do you end up at.. obvious voltages can vary but trying to get a ballpark on things.
Thanks in advance
although at this point i think the issue is the "watercooler" setting in the bios, i think changing to boxed will lower the wattage limits and make it better. I'm going to retry with this change later on and see if that brings this down.
I have it at 5.1 fixed and 3.9 and 3.9 on the ratio along with bios volts around 1.28v and llc is tight, i think 2 or 3. Cinebench will avg 88 but hit 100c at times.
What ratios are most setting and what voltages on average do you end up at.. obvious voltages can vary but trying to get a ballpark on things.
Thanks in advance