- Joined
- May 14, 2004
- Messages
- 27,031 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
Last edited:
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
ATI 9500NP / 9800SE Hardmod
- Thread starter W1zzard
- Start date
D
DeX
Guest
hi , scheint ja recht einfach zu sein.
hat jemand diesen mod schon gemacht ?
hat jemand diesen mod schon gemacht ?
Slayerstaps
New Member
- Joined
- Aug 12, 2004
- Messages
- 313 (0.04/day)
- Location
- Noord-Brabant,The Netherlands
Jah vielen haben diesen mod gemacht aber ich nicht...
- Joined
- May 14, 2004
- Messages
- 27,031 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
english only please, except in the german forums.
i did the mod .. works great
i did the mod .. works great
I ran out of conductive stuff, and my dad put his solder gun somewhere....
R
Ramon
Guest
R360 core
Hi Wizzard.
I have a Sapphire 9800SE L-shaped ram (266bits) with the R360 core. I removed the heat sink and it is the 360. softmodded all right until I flashed it to an XT (why not , it's a 360 after all?). The oly driver able to go from 9800Se to XT I have found is the Omega driver, but they don't have the 4.9Beta
2 Questions:
#1 Why your driver (V47 and V49) refuse to install (Unrecognized hardware error) ? The 9800XT is not supported yet ?
#2 Is the hardmod the same for the 360 core ?
Many thanks,
Ramon
Hi Wizzard.
I have a Sapphire 9800SE L-shaped ram (266bits) with the R360 core. I removed the heat sink and it is the 360. softmodded all right until I flashed it to an XT (why not , it's a 360 after all?). The oly driver able to go from 9800Se to XT I have found is the Omega driver, but they don't have the 4.9Beta
2 Questions:
#1 Why your driver (V47 and V49) refuse to install (Unrecognized hardware error) ? The 9800XT is not supported yet ?
#2 Is the hardmod the same for the 360 core ?
Many thanks,
Ramon
- Joined
- May 14, 2004
- Messages
- 27,031 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
well actually i have never seen any performance increase from a pro to xt mod .. if you clock a real xt at pro speeds, performance is the same as a real pro ..
- Joined
- May 14, 2004
- Messages
- 27,031 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
got any numbers to back that?
Look in the endless OCfaq archive...some people get a boost from about 5400 to 6500 in 3dmark 03. If i clock my card to XT, i get about 5900 now (i also get around 5400 stock) The small jump from 380/340 to 412/365 shouldnt boost you 1100 points....
Hello, I'm new member here.
Last week I bought a brand new Sapphire Radeon 9500 nonpro 128MB 256Bit with L shape 3.3ns Infineon memory layout.
I got my Sapphire R9500 softmodded successfully into R9700 and I OC-ed it into 325/300 core/memory with stock cooling.
I consider to use Arctic Cooling VGA Silencer Rev.3 to replace the stock cooler.
I got 7200 in 3DMark2001 SE.
While I got 4700 in 3Dmark2003.
My PC specs:
Intel PIV 1.5GHz
MSI MS-6534 i845
384MB PC133 SDRAM
Seagate 7200.7 40GB
LiteOn CDRW 52x32x52
400 Watt PSU
Is that scores good enough?
I wonder why my 3DMark 2001 SE is too low.
Can anybody give me some explaination?
Sorry for my English.
Thanks.
Last week I bought a brand new Sapphire Radeon 9500 nonpro 128MB 256Bit with L shape 3.3ns Infineon memory layout.
I got my Sapphire R9500 softmodded successfully into R9700 and I OC-ed it into 325/300 core/memory with stock cooling.
I consider to use Arctic Cooling VGA Silencer Rev.3 to replace the stock cooler.
I got 7200 in 3DMark2001 SE.
While I got 4700 in 3Dmark2003.
My PC specs:
Intel PIV 1.5GHz
MSI MS-6534 i845
384MB PC133 SDRAM
Seagate 7200.7 40GB
LiteOn CDRW 52x32x52
400 Watt PSU
Is that scores good enough?
I wonder why my 3DMark 2001 SE is too low.
Can anybody give me some explaination?
Sorry for my English.
Thanks.
U
Unregistered
Guest
Its a old version use the 3dMark2003 its the same dumb qeustion as why is my videocard slower with old divers :S
M
mulder
Guest
Hardmod Resistor Question
I have an Xpertvision 9800SE that runs flawless with the softmod drivers.
I would like to do the hardmod by connecting pins 2-3.The thing that troubles me is that the resistor that used to be moved from 1-2 to 2-3 is around 5 Kohm.Won't I be damaging my card by just "shorting" 2-3.Is there any successful mods out there that used this method?
I have an Xpertvision 9800SE that runs flawless with the softmod drivers.
I would like to do the hardmod by connecting pins 2-3.The thing that troubles me is that the resistor that used to be moved from 1-2 to 2-3 is around 5 Kohm.Won't I be damaging my card by just "shorting" 2-3.Is there any successful mods out there that used this method?
- Joined
- May 14, 2004
- Messages
- 27,031 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
nope .. many people have done it successfully .. never heard of any problems
U
Unregistered
Guest
Do you only need to make a connection between 2 and 3, and not cut any between 1 and 2 ?
jkabaseball
New Member
- Joined
- Sep 12, 2004
- Messages
- 13 (0.00/day)
do i need to flash to pro bios after connecting the 2 pins?
C
CjVirus
Guest
Hi gues i am a new ati owner ......( i had geforce 2 mx!).
I have softmoded my Club 3d 9800 se 256 bit to 9800 and now i want to hardmod it
so here are the question......
Were do i find the PRO rom and the flashing program?
Does anyone heared that something went wrong with club 3d card by hardmoding them?
I have softmoded my Club 3d 9800 se 256 bit to 9800 and now i want to hardmod it
so here are the question......
Were do i find the PRO rom and the flashing program?
Does anyone heared that something went wrong with club 3d card by hardmoding them?
- Joined
- May 14, 2004
- Messages
- 27,031 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
bioses at http://bios.techpowerup.com
C
CjVirus
Guest
I tryed to hardmod but i have a problem....my card has Etrontech 3.3 bios chip but there is no Etrontech bios for pro.I have tryed to flash with other manufacturers bios but it doesnt work.Now i have the original 9800 se bios again.
The question....What sould i do to upgrate to pro?
The question....What sould i do to upgrate to pro?
C
CjVirus
Guest
Nobody?Anything?
jkabaseball
New Member
- Joined
- Sep 12, 2004
- Messages
- 13 (0.00/day)
your in the same boat as the Infineon users, nothing you can do but overclock it.
L
LiOneL
Guest
After doing the mod card is not responding?
I did the mod on 9500 Non Pro L shaped memory card... Soft mod worked just fine before i tried hard mod. I unsoldered the resistor and moved to position 2-3. The computer doesnt started... Problem VGA says D-Bracket.. I unsoldered resistor again and put to position 1-2 card still dead. Is it possible that i damaged the GPU? Can the GPU be replaced if its damaged? Are the R300 and R350/R360 GPUs compatible? I dont think that there are available R300 GPUs anymore ...
Also when i was mounting the AMD cooler (replaced stock cooler with AMD one before tried this hard mod) on card Screw driver slipped away a little bit and hit the board, but i think it dont do any visible damage to the card... Any advices?
I did the mod on 9500 Non Pro L shaped memory card... Soft mod worked just fine before i tried hard mod. I unsoldered the resistor and moved to position 2-3. The computer doesnt started... Problem VGA says D-Bracket.. I unsoldered resistor again and put to position 1-2 card still dead. Is it possible that i damaged the GPU? Can the GPU be replaced if its damaged? Are the R300 and R350/R360 GPUs compatible? I dont think that there are available R300 GPUs anymore ...
Also when i was mounting the AMD cooler (replaced stock cooler with AMD one before tried this hard mod) on card Screw driver slipped away a little bit and hit the board, but i think it dont do any visible damage to the card... Any advices?
C
CjVirus
Guest
try with another gfx card and also try your 9800 to another pc.Good luke dude