- Joined
- Oct 20, 2016
- Messages
- 40 (0.01/day)
I have a frankenbuild going on and i'm trying to see if you tech savy guys would have some info into why she isn't receiving power.
Anyhoo I have
Dell Poweredge 2900 CASE
2 Dellpoweredge 930Watt Redundant PSU's
ASUS Rog Maximus VIII Hero MOTHERBOARD
Intel Core i7‑6700K 4 GHz CPU
Vengeance LPX 16GB (2x8GB) DDR4 DRAM 2400MHz
Now this Dell Poweredge 2900 case I found (I'm using only the case and psu's in this build) came with two 930watt redundant psu's. But! they're connected to what dell calls a Power Distribution Board which has two connections the first (1) being a standard 24pin ATX Power connection and the other (2) is a 20pin ATX Power connection used on the old motherboard that was once in this server. I bought two conversion cables to fit onto my new motherboard one being a 20 to 24pin ATX connection and a 24 to 8 pin ATX connection to power my rig using this setup.
I got everything mounted and plugged into my build but when I plug in the PSU's I get no power to my motherboard the leds or nothing will power or or light up.
When Installing it I mounted my MB first then installed the CPU, Heatsink, RAM cards then I Plugged in the power connections to the 24 and 8 pin connections on the motherboard then put the cooling fans in. But when I got everything plugged in I receive lights on the PSU'S but nothing after that.
Any ideas?
Anyhoo I have
Dell Poweredge 2900 CASE
2 Dellpoweredge 930Watt Redundant PSU's
ASUS Rog Maximus VIII Hero MOTHERBOARD
Intel Core i7‑6700K 4 GHz CPU
Vengeance LPX 16GB (2x8GB) DDR4 DRAM 2400MHz
Now this Dell Poweredge 2900 case I found (I'm using only the case and psu's in this build) came with two 930watt redundant psu's. But! they're connected to what dell calls a Power Distribution Board which has two connections the first (1) being a standard 24pin ATX Power connection and the other (2) is a 20pin ATX Power connection used on the old motherboard that was once in this server. I bought two conversion cables to fit onto my new motherboard one being a 20 to 24pin ATX connection and a 24 to 8 pin ATX connection to power my rig using this setup.
I got everything mounted and plugged into my build but when I plug in the PSU's I get no power to my motherboard the leds or nothing will power or or light up.
When Installing it I mounted my MB first then installed the CPU, Heatsink, RAM cards then I Plugged in the power connections to the 24 and 8 pin connections on the motherboard then put the cooling fans in. But when I got everything plugged in I receive lights on the PSU'S but nothing after that.
Any ideas?