4 pin PWM fan splitter cable

Millennium · Jul 6, 2011

Hi there
I just today got a PWM fan splitter cable off ebay. I have looked at it closely and it seems to split all 4 cables of the PWM spec and wire them all up in parallel to it's two sockets.

When I was researching these cables I was lead to believe that the tach signal wire should only be connected to one fan. Unfortunately this cable seems to connect both fans to the mobo cpu fan socket signal pin. Will this still work? Is it dangerous?

I will give this a go when my CPU arrives for my build but it would be great to get some feedback before I wire it all up. If it comes down to it I can just cut the signal wire to one of the extension sockets to 'fix' the wire. The wire is not home made, it comes in a sealed packet so that leads me to believe it is correct... please advise.

edit: found a review of the cable saying it was 'garbage' cause it sends the rpm signals for both fans to the motherboard. Looks like I will be modding it afterall. What a stupid mistake to make in a clearly retail product...

mlee49 · Jul 6, 2011

Wait, the PWM signal is sent from your motherboard not your fans.

Which fans is this going to control? Cpu heatsink? Different fans entirely?

What exactly did you want it to do? Run a PWM control to one fan only while running the other fan at 100%? It seems pretty clear in the description(and from the picture) that this will take one PWM signal and send it to both fan headers.

I think it's totally fine to have the signal split between two fans, it's doing exactly as its intended to.

I'm still confused as to what your purpose is, please clarify how you want to run your fans.

LordJummy · Jul 6, 2011

mlee49 said:
Wait, the PWM signal is sent from your motherboard not your fans.

Which fans is this going to control? Cpu heatsink? Different fans entirely?

What exactly did you want it to do? Run a PWM control to one fan only while running the other fan at 100%? It seems pretty clear in the description(and from the picture) that this will take one PWM signal and send it to both fan headers.

I think it's totally fine to have the signal split between two fans, it's doing exactly as its intended to.

I'm still confused as to what your purpose is, please clarify how you want to run your fans.

mlee49 is correct. It does exactly what it says. How would a dumb splitter send multiple PWM speeds through one cable to multiple fans? Its intended job is to control 2 fans at the same time with one PWM hookup.

scaminatrix · Jul 6, 2011

cheesefeat's a good seller, I've dealt with him a few times before. Test it, see what it does; the guy who posted the other review might have just been a complete idiot

It won't be dangerous, just monitor temps and listen to the speeds of the fans.

_JP_ · Jul 6, 2011

Millennium said:
found a review of the cable saying it was 'garbage' cause it sends the rpm signals for both fans to the motherboard.

Exactly. It works like this: The motherboard supplies the power and the PWM signal to the connector and this is independently of the number of fans you connect to said connector (there's a limit, though). The fan, when powered and running, returns a signal (usually trough the yellow wire) to the motherboard, that gives the RPM of the fan. The more "tach wires" you have connected to the motherboard, the more RPM you'll see in the readouts. It usually adds the RPMs of each fan. You can use the method that Arctic Cooling uses with their fans, although their fans already have a sort-of splitter included. Their fans get the power and PWM signal trough one connector (usually on the CPU-fan header) and have another connector that only has the "tach wire", so that you can connect to another fan header on the motherboard (the idea is to connect it to a 3-pin header) to get the fan's RPM readout.

Millennium · Jul 6, 2011

Just to clarify: I am hoping to run 2 CPU cooler fans from one CPU cooler 4 pin socket. I think I will try it out as it is, if the RPM value seems doubled or I have any other problems like the fans running too slowly I will mod the lead. I don't blame the seller, he sold me a sealed part, he would expect it to work properly.

mlee49 and LordJummy , I guess my original post was unclear. I want the PWM signal split properly to speed control both fans, I just want the correct RPM reported to the mobo from the fans. If the splitter causes my fan rpm reading to double I'll just mod it; no big deal!

_JP_ · Jul 6, 2011

Millennium said:
I want the PWM signal split properly to speed control both fans, I just want the correct RPM reported to the mobo from the fans. If the splitter causes my fan rpm reading to double I'll just mod it; no big deal!

By modding you cable I assume you're going to cut one of the tachometer wires. That will result in you motherboard only reading the RPMs of one of the fans connected.
And by "split properly", you mean...?

Millennium · Jul 6, 2011

That's right re the mod, just cut one of the tacho wires. PWM signal split to 2 fans = fan control to both fans AFAIK. That's what I meant by split properly. Hopefully the extra load won't be a problem.

_JP_ · Jul 6, 2011

Then yes, both fans will be controlled by the same PWM signal with no issues and the load of those two fans won't be a problem.

de.das.dude · Jul 6, 2011

both fans can be controlled by the same PWM signal, provided the total current doe not exceed the mobos specification. or you will end up frying some transistor.

but the RPM cable wont work. it wont damage the mobo, but will give junk readings.

System Name	this_is_so_leet_it_needs_no_name
Processor	Intel I5 2500k @ 4.5Ghz
Motherboard	Asus P8 P67-M Pro
Cooling	MUX-120 with Dual Fan
Memory	Samsung Memory DDR3 2133 Overclocked (non LP)
Video Card(s)	XFX ATI/AMD 5870 1gb @ [tbc]
Storage	2*2tb Samsung Raid 0 + 64gb Kingston SSD
Display(s)	BenQ G2420HDBL LED monitor
Case	Lian Li PC-60 old skool alu case
Audio Device(s)	Asus Xonar DX/XD PCI-Express (great)
Power Supply	Corsair 650 TX
Software	Win 7 64bit

System Name	The Dove Box Rev 3.0
Processor	i7 8700k @ 4.7GHz
Motherboard	Asus Maximus X APEX
Cooling	Custom water loop
Memory	16GB 3600 MHz DDR4
Video Card(s)	2x MSI 780 Ti's in SLI
Storage	500GB Samsung 850 PCIe SSD, 4TB
Display(s)	27" Asus 144Hz
Case	Enermax Fulmo GT
Audio Device(s)	ON BOARD FTW
Power Supply	Corsair 1200W
Keyboard	Logitech G510
Software	Win 10 64x

System Name	Workstation1 \| Asus G55VW-DS71
Processor	i7 970 3.8GHz \| i7 3610QM
Motherboard	RIII Formula
Cooling	EK 360 Supreme HF \| Asus G55VW
Memory	24GB Dominator \| 12GB DDR3
Video Card(s)	2x Diamond HD 6970 \| GTX 660M
Storage	2x Vertex4 256GB \| 256GB Vertex4 & 750GB HDD
Display(s)	3x Crossover 27" LED S-IPS + 30" DELL IPS
Case	Corsair Obsidian 800D
Audio Device(s)	X-Fi Titanium Fatal1ty Pro + Gigaworks G550W
Power Supply	HX1000 + NZXT Black Sleeved Extensions
Software	Win7Ult64Bit
Benchmark Scores	ballz

System Name	Benny
Processor	Phenom II 1055t @ 3.3GHz; 300x11; 1.380v; NB 2700; HT 2400
Motherboard	ASUS Crosshair IV Formula (2002 BIOS)
Cooling	Thermalright TRUE 120 Black + 2 Xilence Red Wing PWM 120mm (push/pull) + polycarbonate fan holders
Memory	8GB GeIL Ultra 2133MHZ C9 running at 1600MHz @ 7-7-7-21 1T 1.5v
Video Card(s)	MSI Twin Frozr II GTX470 @ Stock w/CPU fan cable-tied on, as one of the GPU fans broke.
Storage	60GB OCZ Agility3 (OS);500GB WDC Grn; 1x1TB WDC Blk (Backup)
Display(s)	ASUS PA823Q
Case	Silverstone Raven 2 (all cables custom sleeved with velcro mod on side panel...)
Audio Device(s)	X-Fi (Onboard) + Harmon Kardon HK6100 amp powering JVC HA-RX700's with Zalman mic
Power Supply	Corsair HX650W
Software	Win7 Pro x64
Benchmark Scores	No benchies so making this space useful! Corsair M90, Logitech G19. Phobya FlexLight LED's (gawjus)

System Name	LenovoⓇ ThinkPad™ T430
Processor	IntelⓇ Core™ i5-3210M processor (2 cores, 2.50GHz, 3MB cache), Intel Turbo Boost™ 2.0 (3.10GHz), HT™
Motherboard	Lenovo 2344 (Mobile Intel QM77 Express Chipset)
Cooling	Single-pipe heatsink + Delta fan
Memory	2x 8GB KingstonⓇ HyperX™ Impact 2133MHz DDR3L SO-DIMM
Video Card(s)	Intel HD Graphics™ 4000 (GPU clk: 1100MHz, vRAM clk: 1066MHz)
Storage	SamsungⓇ 860 EVO mSATA (250GB) + 850 EVO (500GB) SATA
Display(s)	14.0" (355mm) HD (1366x768) color, anti-glare, LED backlight, 200 nits, 16:9 aspect ratio, 300:1 co
Case	ThinkPad Roll Cage (one-piece magnesium frame)
Audio Device(s)	HD Audio, RealtekⓇ ALC3202 codec, DolbyⓇ Advanced Audio™ v2 / stereo speakers, 1W x 2
Power Supply	ThinkPad 65W AC Adapter + ThinkPad Battery 70++ (9-cell)
Mouse	TrackPointⓇ pointing device + UltraNav™, wide touchpad below keyboard + ThinkLight™
Keyboard	6-row, 84-key, ThinkVantage button, spill-resistant, multimedia Fn keys, LED backlight (PT Layout)
Software	MicrosoftⓇ WindowsⓇ 10 x86-64 (22H2)

4 pin PWM fan splitter cable

Millennium

mlee49

LordJummy

New Member

scaminatrix

_JP_

Millennium

_JP_

Millennium

_JP_

de.das.dude

Pro Indian Modder

System Name	Monke \| Work Thinkpad\| Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench