• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

4850 overclocking problems

Monkeywoman

New Member
Joined
Jan 2, 2008
Messages
157 (0.03/day)
Location
Ottawa, Ontario, Canada
System Name Monkeywoman
Processor Core2Duo Q6600 3.150 7x450 1.40vCore G0
Motherboard Asus P5K SE
Cooling Thermalright 120 X for cpu Thermalright Highriser for northbridge
Memory 4Gig OCZ 900Mhz c5
Video Card(s) ATI Radion HD4850 stock for now
Storage 160gb Seagate master 250gb Seagate 500gb Seagate 500gb Western D
Display(s) LG Flatron 22inch
Case Coolermaster Cosmos S
Audio Device(s) Creative XFI
Power Supply Corsair HX620
Software Windows Vista x64 Ultimate
i have been trying to get some nice clocks for my 4850. i have swapped out the stock cooler for a thermaltake dual orb. lately i have been using Rivatuner to get my clocks of 721CORE and 1130MEM on stock voltages. i test my stability with COD4, i get no artifacts but when the battle heats up i get a BSOD; windows then tells me it's a driver problem.

are the clocks i'm choosing too high? do i have enough cooling? could it be something else that's causing instability?
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    201.1 KB · Views: 556
Joined
Oct 1, 2006
Messages
4,884 (0.76/day)
Location
Hong Kong
Processor Core i7-12700k
Motherboard Z690 Aero G D4
Cooling Custom loop water, 3x 420 Rad
Video Card(s) RX 7900 XTX Phantom Gaming
Storage Plextor M10P 2TB
Display(s) InnoCN 27M2V
Case Thermaltake Level 20 XT
Audio Device(s) Soundblaster AE-5 Plus
Power Supply FSP Aurum PT 1200W
Software Windows 11 Pro 64-bit
I will say that 721 core might be too high for stock voltages.
 
Joined
Jul 19, 2006
Messages
43,587 (6.72/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Most deffinitely not enough voltage for that GPU clock.
 

Monkeywoman

New Member
Joined
Jan 2, 2008
Messages
157 (0.03/day)
Location
Ottawa, Ontario, Canada
System Name Monkeywoman
Processor Core2Duo Q6600 3.150 7x450 1.40vCore G0
Motherboard Asus P5K SE
Cooling Thermalright 120 X for cpu Thermalright Highriser for northbridge
Memory 4Gig OCZ 900Mhz c5
Video Card(s) ATI Radion HD4850 stock for now
Storage 160gb Seagate master 250gb Seagate 500gb Seagate 500gb Western D
Display(s) LG Flatron 22inch
Case Coolermaster Cosmos S
Audio Device(s) Creative XFI
Power Supply Corsair HX620
Software Windows Vista x64 Ultimate
oh snap, is there a way do increase voltage without bios flashing? i'm a little worried about flashing and something goes wrong. what do you guys thing would be a good clock?
 

King Wookie

New Member
Joined
Jan 1, 2008
Messages
1,197 (0.20/day)
Location
Johannesburg, South Africa
System Name Blackbox
Processor Intel i5 750 @ stock for now
Motherboard EVGA P55 LE
Cooling Corsair H50 with 2 x Zalman ZM-F3 push/pull
Memory 2 x 2g team extreem DDR3 2000
Video Card(s) Asus GTX 460 Top
Storage Seagate 500.12, Seagate 320.11
Display(s) BenQ FP222W - 22 inches
Case CM 590 with 5x various fans (Thermalright/Noctua)
Audio Device(s) Onboard
Power Supply Corsair HX620
Software XP home SP3
I'm pretty sure someone posted a pencil v-mod for the 4850.

I'll look for it.
 

Monkeywoman

New Member
Joined
Jan 2, 2008
Messages
157 (0.03/day)
Location
Ottawa, Ontario, Canada
System Name Monkeywoman
Processor Core2Duo Q6600 3.150 7x450 1.40vCore G0
Motherboard Asus P5K SE
Cooling Thermalright 120 X for cpu Thermalright Highriser for northbridge
Memory 4Gig OCZ 900Mhz c5
Video Card(s) ATI Radion HD4850 stock for now
Storage 160gb Seagate master 250gb Seagate 500gb Seagate 500gb Western D
Display(s) LG Flatron 22inch
Case Coolermaster Cosmos S
Audio Device(s) Creative XFI
Power Supply Corsair HX620
Software Windows Vista x64 Ultimate

Attachments

  • vddc_pencil1.jpg
    vddc_pencil1.jpg
    94.8 KB · Views: 463
  • mvddc_pencil.jpg
    mvddc_pencil.jpg
    83.2 KB · Views: 443

King Wookie

New Member
Joined
Jan 1, 2008
Messages
1,197 (0.20/day)
Location
Johannesburg, South Africa
System Name Blackbox
Processor Intel i5 750 @ stock for now
Motherboard EVGA P55 LE
Cooling Corsair H50 with 2 x Zalman ZM-F3 push/pull
Memory 2 x 2g team extreem DDR3 2000
Video Card(s) Asus GTX 460 Top
Storage Seagate 500.12, Seagate 320.11
Display(s) BenQ FP222W - 22 inches
Case CM 590 with 5x various fans (Thermalright/Noctua)
Audio Device(s) Onboard
Power Supply Corsair HX620
Software XP home SP3
Joined
Jul 19, 2006
Messages
43,587 (6.72/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
i found the pencil mods, they are done by Wizz (http://www.techpowerup.com/articles/overclocking/voltmods/151/2)

they look easy and i don't think anything can go wrong. is there a special type of pencil i have to use? how do i keep what i pencil in from blowing away by my fans?

There are risks. Graphite from the pencil can get on to other parts and cause hardware failure. Just be very clean about it and take your time, make sure everything is done correctly. Use a can of compressed air aftarwards to be on the safe side.
 

Monkeywoman

New Member
Joined
Jan 2, 2008
Messages
157 (0.03/day)
Location
Ottawa, Ontario, Canada
System Name Monkeywoman
Processor Core2Duo Q6600 3.150 7x450 1.40vCore G0
Motherboard Asus P5K SE
Cooling Thermalright 120 X for cpu Thermalright Highriser for northbridge
Memory 4Gig OCZ 900Mhz c5
Video Card(s) ATI Radion HD4850 stock for now
Storage 160gb Seagate master 250gb Seagate 500gb Seagate 500gb Western D
Display(s) LG Flatron 22inch
Case Coolermaster Cosmos S
Audio Device(s) Creative XFI
Power Supply Corsair HX620
Software Windows Vista x64 Ultimate
hey, soo i coloured in the transistors with a mechanical pencil, .5mm. once i was done i blew off any dust that was on the back of the card. i pop the card into the comp and turn on it on....no video. the red leds on the back of the card flash once. the rest of the comp starts up normally, just no video.....what do i do now?
 
Joined
Jun 20, 2008
Messages
2,861 (0.49/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 5 5600X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 6700 XT
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Gigabyte G24F-2 (180Hz Freesync) & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
Rub it out ......quick
 

Monkeywoman

New Member
Joined
Jan 2, 2008
Messages
157 (0.03/day)
Location
Ottawa, Ontario, Canada
System Name Monkeywoman
Processor Core2Duo Q6600 3.150 7x450 1.40vCore G0
Motherboard Asus P5K SE
Cooling Thermalright 120 X for cpu Thermalright Highriser for northbridge
Memory 4Gig OCZ 900Mhz c5
Video Card(s) ATI Radion HD4850 stock for now
Storage 160gb Seagate master 250gb Seagate 500gb Seagate 500gb Western D
Display(s) LG Flatron 22inch
Case Coolermaster Cosmos S
Audio Device(s) Creative XFI
Power Supply Corsair HX620
Software Windows Vista x64 Ultimate
ok,so I removed the graphite with an eraser the cleaned it up with rubing alchohol. No luck. I put in my old card in and everything is fine. The card is fryed :(
 
Joined
Nov 27, 2006
Messages
2,106 (0.33/day)
System Name Norfree
Processor i5 3570k @4.4
Motherboard Gigabyte UD5H
Cooling 212 Evo
Memory 4x4GB Kingston 1600 @ 1833 9cl
Video Card(s) Sapphire Nitro Fury
Storage Corsair SSD, WD Black
Display(s) 1080p TV
Case Corsair 300-R
Audio Device(s) Auzentech Prelude > Fidelio X2s and AD-700s
Power Supply PCP&C Silent 950w
Software Win 10 Pro 64
ok,so I removed the graphite with an eraser the cleaned it up with rubing alchohol. No luck. I put in my old card in and everything is fine. The card is fryed :(

this is the reason I've never tried a pencil mod...they can be risky if you dont know what you're doing!
 

Monkeywoman

New Member
Joined
Jan 2, 2008
Messages
157 (0.03/day)
Location
Ottawa, Ontario, Canada
System Name Monkeywoman
Processor Core2Duo Q6600 3.150 7x450 1.40vCore G0
Motherboard Asus P5K SE
Cooling Thermalright 120 X for cpu Thermalright Highriser for northbridge
Memory 4Gig OCZ 900Mhz c5
Video Card(s) ATI Radion HD4850 stock for now
Storage 160gb Seagate master 250gb Seagate 500gb Seagate 500gb Western D
Display(s) LG Flatron 22inch
Case Coolermaster Cosmos S
Audio Device(s) Creative XFI
Power Supply Corsair HX620
Software Windows Vista x64 Ultimate
this is the reason I've never tried a pencil mod...they can be risky if you dont know what you're doing!

i followed the instructions to the word. i think i must have put too much graphite and that caused it it fry. i didnt smell anything, prolly a short.

i'm going to start saving now so i can buy the fastest card i can so i wont have to do this again. 5870x2? aww man, i'm going to eat some turkey:cry:
 

King Wookie

New Member
Joined
Jan 1, 2008
Messages
1,197 (0.20/day)
Location
Johannesburg, South Africa
System Name Blackbox
Processor Intel i5 750 @ stock for now
Motherboard EVGA P55 LE
Cooling Corsair H50 with 2 x Zalman ZM-F3 push/pull
Memory 2 x 2g team extreem DDR3 2000
Video Card(s) Asus GTX 460 Top
Storage Seagate 500.12, Seagate 320.11
Display(s) BenQ FP222W - 22 inches
Case CM 590 with 5x various fans (Thermalright/Noctua)
Audio Device(s) Onboard
Power Supply Corsair HX620
Software XP home SP3
Man! I'm sorry to hear that.

Of course, you should be able to rma the card, as you have erased any traces of your mod.
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
Joined
Jun 12, 2007
Messages
4,815 (0.78/day)
Location
Wangas, New Zealand
System Name Darth Obsidious
Processor Intel i5 2500K
Motherboard ASUS P8Z68-V/Gen3
Cooling Cooler Master Hyper 212+ in Push Pull
Memory 2X4GB Corsair Vengeance DDR3 1600
Video Card(s) ASUS R9 270x TOP
Storage 128GB Samsung 830 SSD, 1TB WD Black, 2TB WD Green
Display(s) LG IPS234V-PN
Case Corsair Obsidian 650D
Audio Device(s) Infrasonic Quartet
Power Supply Corsair HX650w
Software Windows 7 64bit and Windows XP Home
Benchmark Scores 2cm mark on bench with a razor blade.
Man that sucks.
RMA. . . . .they will not know the difference.
 
Top