Nutterbutter
New Member
- Joined
- Nov 26, 2020
- Messages
- 7 (0.01/day)
Recently attempted to flash my 5600xt gaming mx bios. I have a 710 as a back up to log back into my pc just incase, and this problem has been perplexing. I have tried usb dos booting, nuking my pc, and 1-8pin method. The 1-8pin method lets me reach Windows cmd as well as dos. However the problem is the test “fail”. As I’ve known that you have to remove the clip off the 1-8 pins for a “pass”. Flashing with the clip still on gives the “failed to read rom” error. However, once I remove the clip, amdvbflash displays no adapter found at all. The fault is all mine as I don’t have the best experience with gpu flashing. I used 3.04+ to flash, it stated success and then after the reboot the fire nation attacked. I haven’t used any other bios prior than the stock bios in this link but my gpu reads 1002 7310 currently, while stock was
0x1002 0x731F
Would appreciate any tips and advice. Thinking of giving up as I have been doing trouble shooting for 3 days without sleep. Worst case scenario I’ll make peace with my first gpu and move on. Though, do hope someone can guide me. Not ready for a beefy card upgrade yet. :/
0x1002 0x731F
Would appreciate any tips and advice. Thinking of giving up as I have been doing trouble shooting for 3 days without sleep. Worst case scenario I’ll make peace with my first gpu and move on. Though, do hope someone can guide me. Not ready for a beefy card upgrade yet. :/