- Joined
- May 29, 2011
- Messages
- 426 (0.09/day)
- Location
- Doncaster
System Name | 2020 build |
---|---|
Processor | 3950x |
Motherboard | Gigabyte Aorus extreme |
Cooling | Custom Loop. PETG. Phanteks 140 distro plate. EK 400mm res. EK GPU/back plate. EK CPU.480rad 2x360 |
Memory | 32gig 3600mhz 16,16,16,36. Trident Z Royal |
Video Card(s) | MSI gaming X trio 2080ti |
Storage | 2TB Gigabyte Aorus gen4. 1TB Aorus gen4 |
Display(s) | LG CX 55 |
Case | Phanteks 719 |
Audio Device(s) | Audeez LCD3. Chord Hugo 2 |
Power Supply | Seasonic prime 1300 platinum |
Software | Cubase, Adobe |
5930k
Asus Rampage V
16Gb Kingston HyperX Savage 3000mhz 15,16,16 (very early batch)
Classified 980TI
Samsung 940 evo 250g OS drive
Samsung 951 NVMe
EVGA 750W G2
PC froze, tried to restart but I get 19 Q-code or 6F. 19 is pre memory PCH initialization is started, 6F System agent initialization.
Hitting safe boot button takes me to logo screen and just stays there, I can not get to the BIOS.
Q-LED's, boot device LED is lit up but I suspect it is incorrectly identifying the problem. Some times it is the GPU or CPU light.
My CPU has always been dificult to get a stable OC, not a good chip, I kept the voltage just below 1.3. Some of my OC attempts took it to 1.330v.
I'm going to drain the loop and try reseating cpu but I doubt it will help. I'm going to order a 6850k but just thought I would make a quick post here to see if any of you guys have any ideas about how to be 100% sure it is the CPU.
Asus Rampage V
16Gb Kingston HyperX Savage 3000mhz 15,16,16 (very early batch)
Classified 980TI
Samsung 940 evo 250g OS drive
Samsung 951 NVMe
EVGA 750W G2
PC froze, tried to restart but I get 19 Q-code or 6F. 19 is pre memory PCH initialization is started, 6F System agent initialization.
Hitting safe boot button takes me to logo screen and just stays there, I can not get to the BIOS.
Q-LED's, boot device LED is lit up but I suspect it is incorrectly identifying the problem. Some times it is the GPU or CPU light.
My CPU has always been dificult to get a stable OC, not a good chip, I kept the voltage just below 1.3. Some of my OC attempts took it to 1.330v.
I'm going to drain the loop and try reseating cpu but I doubt it will help. I'm going to order a 6850k but just thought I would make a quick post here to see if any of you guys have any ideas about how to be 100% sure it is the CPU.