vvulture
New Member
- Joined
- Jan 25, 2009
- Messages
- 48 (0.01/day)
- Location
- Sydney, Australia
Hey guys,
Here is what i have done so far :
- Unlocked extra shaders using RBE 1.28
- Increased the voltage of my 6950 to 1.275v using RBE 1.28
- Increased upper clock limits in CCC using RacerX v11
- Set power control in CCC to +20%
Now, the issue is that when i increase the core clocks past about 920Mhz, i start getting GPU thottleing. I have attached a pic to explain better. As you can see, the GPU clocks throttle really bad. This test was done using Furmark 1.9.0 on the 1920x1080 preset.
Have any of you 6950 overclockers ever come across this ?
My temps are not the problem and both cards are under water.
Thx guys.
Here is what i have done so far :
- Unlocked extra shaders using RBE 1.28
- Increased the voltage of my 6950 to 1.275v using RBE 1.28
- Increased upper clock limits in CCC using RacerX v11
- Set power control in CCC to +20%
Now, the issue is that when i increase the core clocks past about 920Mhz, i start getting GPU thottleing. I have attached a pic to explain better. As you can see, the GPU clocks throttle really bad. This test was done using Furmark 1.9.0 on the 1920x1080 preset.
Have any of you 6950 overclockers ever come across this ?
My temps are not the problem and both cards are under water.
Thx guys.