xristo69
New Member
- Joined
- Mar 24, 2010
- Messages
- 68 (0.01/day)
System Name | Chris's pc |
---|---|
Processor | Intel core 2 duo e7500 @ 3.5ghz |
Motherboard | Intel dg31pr |
Cooling | Golden orb 2 |
Memory | 4gb ddr2 |
Video Card(s) | Hd radeon 5770 oc |
Storage | 2 x 150gb |
Display(s) | Benq 22 full hd lcd |
Case | Atx |
Audio Device(s) | inbuilt |
Power Supply | 500w |
Software | Windows 7 ultimate 64bit |
Hey guys im new here , long time reader. Im having a problem with my 9800gt see i was changing over my stock cooling to an aftermarket arctic. When i was unscrewing the heat sink from the board i accidentaly chipped one or two of the ferrite beads beads off. At the moment the card is DEAD and does not work =( im really spewing.
So long story short is there a way i could solder new ferrite beads on ? is there another way i could quick fix this situation because i know the card isn't ruined only what i accidentaly done.
If pics are needed i will upload.
Thanks in advance guys =)
So long story short is there a way i could solder new ferrite beads on ? is there another way i could quick fix this situation because i know the card isn't ruined only what i accidentaly done.
If pics are needed i will upload.
Thanks in advance guys =)