A case to fit

[Toothless]

Alrighty guys, here's a new adventure from your local dragon.

I have this server board that is the S2600IP4. It's massive, it's beautiful, it's sitting on a box right now. I'm trying to find a case that can fit it and so far I've found the only case is the one it originally sold with and sites want the $1.1k for the entire thing. It's a "custom 14.2"x15" form factor" and it doesn't seem to fit into a Lian Li PC-V1000B with the guts taken out even. By all means if I had the tools to create a new board tray it might fit with some "adjustments" but I'd rather not murder the metal, yet.

If anyone could point this toothless dragon in the right direction to fit this beast please, PLEASE do. This amazing thing needs a proper house.

(Yes it's crunching WCG)

 

[phanbuey]

Lian li v760

https://www.newegg.com/Product/Product.aspx?Item=2AM-000Z-00038'

whats the budget?

also this:
https://www.newegg.com/Product/Prod...VmIzICh1kzQ_uEAQYASABEgIEu_D_BwE&gclsrc=aw.ds

 

[Toothless]

Lian li v760

https://www.newegg.com/Product/Product.aspx?Item=2AM-000Z-00038'

whats the budget?

also this:
https://www.newegg.com/Product/Product.aspx?Item=N82E16811147227&ignorebbr=1&source=region&nm_mc=KNC-GoogleAdwords-PC&cm_mmc=KNC-GoogleAdwords-PC-_-pla-_-Cases+(Computer+Cases+-+ATX+Form)-_-N82E16811147227&gclid=EAIaIQobChMImJqQmtvx3wIVmIzICh1kzQ_uEAQYASABEgIEu_D_BwE&gclsrc=aw.ds

Budget isn't an issue, yet. This I know will be something I gotta save up for. The issue with both of those cases is that they hold up to the 12-13" EATX. This board is bigger than that.

EDIT: That Rosewill actually might work. Drill some new holes for the standoffs and it'll be hanging over the everything on the inside.

 

[phanbuey]

what model is that board?

How about this one
https://www.newegg.com/Product/Product.aspx?Item=N82E16811119323&ignorebbr=1&source=region&nm_mc=KNC-GoogleAdwords-PC&cm_mmc=KNC-GoogleAdwords-PC-_-pla-_-Cases+(Computer+Cases+-+ATX+Form)-_-N82E16811119323&gclid=EAIaIQobChMIh97K4t3x3wIVEYrICh3f4QRwEAQYAyABEgKEYfD_BwE&gclsrc=aw.ds

Or thermaltakes' MM rip off
https://www.amazon.com/Thermaltake-Stackable-Certified-Computer-CA-1D8-00F1WN-00/dp/B00TQI9BY8

or the drive cage and the 5.25 inch out of here:
https://www.amazon.com/dp/B01N4R021Q/ref=emc_b_5_i

 

[Toothless]

Board model listed in first post. S2600IP4.

 

[phanbuey]

https://www.amazon.com/Thermaltake-...ocphy=9028284&hvtargid=pla-568790618300&psc=1

^ that will hold a small child.

 

[Brusfantomet]

If you can find a used Caselabs case it would probably hold it (magnum M10 or something thereabout)

Since the TT core WP100 and WP200 (linked in the post above) has some striking resemblances to the old Caselabs it should do as well I think.