• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Accelero Xtreme GTX 280 mini review and support

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
I'm hoping improving the cooling I can get my GTX 285 clocks back up and reduce the core temps considerably.

Its all ordered, got the scythe kit coming, just got to work out the best way of drilling the holes for extra mounting holes on the NVIO as I dont have a dremmel

use thermal epoxy.

I dont want anything permanent :ohwell:

Yep, non-permanent is nice. Either drill one hole much closer, or move both holes closer. Which ever leaves you to do less modifications on top (of the heatsink).

Has anyone thought of using one of these: http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=240&products_id=25607

edit: Ah. Too high. Might work under the Thermalright though.

That was the first sink I though of using with Accelero, before it was released. Didn't know then that it was too high, but it would also need quite a lot of modification to get the mounting feet to fit.

Just noticed that was the new GTX 285 version:
http://www.swiftnets.com/products/gtx285.asp
GTX 260/280 version is only 10cm high and would fit nicely (with lots of dremeling around core area).
http://www.swiftnets.com/products/gtx200.asp

Although, you could cut the VRM head and NVIO head off and use just those, but that leaves just thermal epoxy as mounting solution (memory parts would work with thermal tape too). Unless you're super handy and drill mounting holes with threads to the sink. edit: it already has holes for use with original screws :-o "Before putting the stock back plate in place, fasten the two small screws in the I/O chip area as shown above, and only then fasten the back plate in place with the stock screws."
 
Last edited:

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.61/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
all you gotta do is mix in a equal amt of compound into the epoxy to make a semi permanent bond, thats what i did with some Tweakmonster Ramsinks applied to a MR 9800 256 which in turn i overclocked the hell out of it aka 350/297 OC to 459/416.
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
Here we go boys and girls, big thanks to everyone who helped me on here, especially TuxBrothers, I had your photos up as a sort of guide, lol :toast:

http://forums.elounge.co.cc/viewtopic.php?f=18&t=25&p=68

Nice job, kinda shows you had a great template to work on :p Why reinvent wheel, I can't think of anyway to improve the sink job TuxBrothers and you did.

"I bought myself an Arctic Cooling Accelero Xtreme GTX 280 and a Scythe VGA Chip Heatsink kit to make up for the inadequate sinks provided with the AC."

But wasn't AC nice to make the ramsinks that big, that it's almost perfect for GTX 285 VRMs ;)
 
Joined
May 12, 2006
Messages
11,119 (1.70/day)
System Name Apple Bite
Processor Intel I5
Motherboard Apple
Memory 40gb of DDR 4 2700
Video Card(s) ATI Radeon 500
Storage Fusion Drive 1 TB
Display(s) 27 Inch IMac late 2017
onboard did you see this post

This is a diagram from Thermalright on how to install the Thermalright heatsink kit on a 260 gtx 55nm 216 core video card. On the red blocked areas I used the Thermalright heatsink kit and the green blocked areas I used the heatsinks provided by Arctic Cooler. Hope this helps.

P.S the 285 gtx VRM heatsink used by Thermalright will actually work as a NVIO heatsink , the adhesive provided by Thermalright is pretty strong, I used the Arctic cooler simply for ease of use but I did test the Thermalright VRM heatsink as a Nvio heatsink ( I marked it with a red x) but it would work. It's not as secure as the one that's bolted down but it would stay on and is big enough. Here is a Link to the Thermalright kit, http://www.sidewindercomputers.com/thgtx28vrsi.html

http://img.techpowerup.org/090625/how I install thermalright.jpg

posted instructions for the 260 gtx 55nm and the thermalright kit.
 
Joined
Jun 19, 2009
Messages
29 (0.01/day)
Location
Visalia, CA
System Name Habu
Processor Intel i7-4940K
Motherboard ASUS Z97-AR
Cooling Noctua
Memory 16 GB ?
Video Card(s) EVGA 780ti
Storage Crucial M4 256 GB, WD Black 1 TB
Display(s) Dell 19"
Case Corsair 540 AIR
Power Supply Silverstone
Software Windows 7 Professional 64 Bit, SP 2
one down and one to go...

I finally had a chance to put in a decent amount of time and get one of my cards wrapped up. I took a Dremel to some of the fins and they cleared the caps quite nicely. Now I just need to swap this card with my other 275 and give next card a cooling makeover.
 

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
posted instructions for the 260 gtx 55nm and the thermalright kit.

Yep, I saw it (I do read all posts in this thread :p). Just wanted a picture of the card with the sinks, like the others are, would look strange to have a PDF page in the middle :)

Well, there aren't anyone else with 55nm 260, so think I'll make a link for it in post #270 (edit:added) until someone provides a picture. I'm not asking you to take it a part just to take one :) That'll still help, if someone needs it.

I finally had a chance to put in a decent amount of time and get one of my cards wrapped up. I took a Dremel to some of the fins and they cleared the caps quite nicely. Now I just need to swap this card with my other 275 and give next card a cooling makeover.

Did you try the first card on the second slot if it fits, or left it as a surprise for the second makeover ?) Oh and if you remember, take a picture of the cooler dremeling when you do the second card. I'd add that too in post 270 to help others.
 
Last edited:

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
But wasn't AC nice to make the ramsinks that big, that it's almost perfect for GTX 285 VRMs ;)

Very true, they are the perfect width, lol.
 

Drewsillac

New Member
Joined
Jun 16, 2009
Messages
22 (0.00/day)
I'll tell you what...
AC needs to get on here and take some tips for all of us who have fought this installation...
Redo their product...
 
Last edited:
Joined
Jun 19, 2009
Messages
29 (0.01/day)
Location
Visalia, CA
System Name Habu
Processor Intel i7-4940K
Motherboard ASUS Z97-AR
Cooling Noctua
Memory 16 GB ?
Video Card(s) EVGA 780ti
Storage Crucial M4 256 GB, WD Black 1 TB
Display(s) Dell 19"
Case Corsair 540 AIR
Power Supply Silverstone
Software Windows 7 Professional 64 Bit, SP 2
OnBoard- I like surprises as I am used to them when I work on any project at home be it PCs or plumbing. I will try to get some sort of photo on the next card, I just wanted to close the patient on the first one.

Drewsillac- I'm with you with AC needing to make some changes. I hope that they don't use their clearance chart as an excuse for some of our issues.


I want to pose these questions to those of you who worked with this cooler:

was it worth the hassle?

would you recommend it despite the installation challenges?
 
Joined
May 12, 2006
Messages
11,119 (1.70/day)
System Name Apple Bite
Processor Intel I5
Motherboard Apple
Memory 40gb of DDR 4 2700
Video Card(s) ATI Radeon 500
Storage Fusion Drive 1 TB
Display(s) 27 Inch IMac late 2017
OnBoard- I like surprises as I am used to them when I work on any project at home be it PCs or plumbing. I will try to get some sort of photo on the next card, I just wanted to close the patient on the first one.

Drewsillac- I'm with you with AC needing to make some changes. I hope that they don't use their clearance chart as an excuse for some of our issues.


I want to pose these questions to those of you who worked with this cooler:

was it worth the hassle?

would you recommend it despite the installation challenges?

it's worth it , big time
 

Drewsillac

New Member
Joined
Jun 16, 2009
Messages
22 (0.00/day)
OnBoard- I like surprises as I am used to them when I work on any project at home be it PCs or plumbing. I will try to get some sort of photo on the next card, I just wanted to close the patient on the first one.

Drewsillac- I'm with you with AC needing to make some changes. I hope that they don't use their clearance chart as an excuse for some of our issues.


I want to pose these questions to those of you who worked with this cooler:

was it worth the hassle?

would you recommend it despite the installation challenges?

Considering I went from 89-90C to 53-56C and I know my VRM is cooled better, yes.
An extra $10 for the Scythe 1000's? Yes...

Now the copperheat sink, I kinda regret, just because it was an extra $20. I wish I would have cut the NVIO sink that comes with the Accelero and dremeled in new holes to fit the NVIO.

Doing things like this challenges you and reminds you of why it's better to build than to buy a Dell.
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
Wow, OCCT might push the accelero to its limits, but gaming has yielded a 25*C decrease! :eek:
 

BababooeyHTJ

New Member
Joined
Apr 6, 2009
Messages
907 (0.17/day)
Processor i5 3570k
Motherboard Gigabyte Z77 UD5h
Cooling XSPC Raystrom
Memory 4x4GB DDR3 1600mhz
Video Card(s) 7950 crossfire
Storage a few
Display(s) 27" Catleap
Case Xigmatek Elysium
Audio Device(s) Xonar STX
Power Supply Seasonic X1050
Software Windows 7 X64
Wow, OCCT might push the accelero to its limits, but gaming has yielded a 25*C decrease! :eek:

Yeah that is just insane, it acctually shuts down a 4870 at stock settings and requires a hard reboot. It makes furmark look like a 2d app, but the error detection is great.
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
Yeah that is just insane, it acctually shuts down a 4870 at stock settings and requires a hard reboot. It makes furmark look like a 2d app, but the error detection is great.

Well my OC on my graphics card is 1hr OCCt stable passing with no errors at 26*C ambient. :D

Accelero made no difference to clocks only temps, makes me think maybe the GTX 285 under occt pushes out more than 250w of heat (the TDP of the accelero) lol
 

Devil May Cry

New Member
Joined
Apr 5, 2009
Messages
26 (0.00/day)
Long time no see =)

I really need EnzoTech MOS-C1. The problem is that there is none here in Sweden.
Does anyone know any store in UK or any other in Euroupe that ships to Sweden?
 

BababooeyHTJ

New Member
Joined
Apr 6, 2009
Messages
907 (0.17/day)
Processor i5 3570k
Motherboard Gigabyte Z77 UD5h
Cooling XSPC Raystrom
Memory 4x4GB DDR3 1600mhz
Video Card(s) 7950 crossfire
Storage a few
Display(s) 27" Catleap
Case Xigmatek Elysium
Audio Device(s) Xonar STX
Power Supply Seasonic X1050
Software Windows 7 X64
Well my OC on my graphics card is 1hr OCCt stable passing with no errors at 26*C ambient. :D

Accelero made no difference to clocks only temps, makes me think maybe the GTX 285 under occt pushes out more than 250w of heat (the TDP of the accelero) lol

It's for a different reason, the OCP on the refrence 4870/90s is set a bit too low. No other program will touch that though. The HR-03 made no difference with my clocks either, but temps on the other hand it made a big difference there.

Long time no see =)

I really need EnzoTech MOS-C1. The problem is that there is none here in Sweden.
Does anyone know any store in UK or any other in Euroupe that ships to Sweden?

Have you tried Quiet-pc?
 

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
If you want some laughs, download the installation manual for the new Thermaltage ISGC-V320 VGA Cooler:

http://www.thermaltake.com/product_...00001447&name=ISGC-V320&ov=n&ovid=&parent_cp=

The picture has a GTX 280 as an example with total FAIL VRM chip placement :D

Here's a quick picture of it, if you are feeling too lazy to download the whole thing :p
 

BababooeyHTJ

New Member
Joined
Apr 6, 2009
Messages
907 (0.17/day)
Processor i5 3570k
Motherboard Gigabyte Z77 UD5h
Cooling XSPC Raystrom
Memory 4x4GB DDR3 1600mhz
Video Card(s) 7950 crossfire
Storage a few
Display(s) 27" Catleap
Case Xigmatek Elysium
Audio Device(s) Xonar STX
Power Supply Seasonic X1050
Software Windows 7 X64
Thats too funny. Sounds like thermaltake, alright. On a GTX280, too. Those things run hot as hell.
 

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
Thats too funny. Sounds like thermaltake, alright. On a GTX280, too. Those things run hot as hell.

Yep, I hope no-one breaks their GTX 280 with those instructions. Already invited future Thermalright owners on this thread for some help, they'll need same sink advise as with Accelero.

Long time no see =)

I really need EnzoTech MOS-C1. The problem is that there is none here in Sweden.
Does anyone know any store in UK or any other in Euroupe that ships to Sweden?

Have you tried Quiet-pc?

Doesn't stock any EnzoTechs. Sorry I don't know either where to get the, at least with cheap postage. Germany has plenty stores with them, but postage will be twice the price of the sinks. None in Finland either, hence my stock cooler chopping.
 
Last edited:

Devil May Cry

New Member
Joined
Apr 5, 2009
Messages
26 (0.00/day)
I found some in Norway, not sure if they ship to Sweden and it's expensive as balls.
Oh well I guess I will have to cut the stock cooler. Stupid AC for being so cheap haha.
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
Rather than linking back, i thought id post my Accelero stuff here:

After having had games crashing on me, I decided to stability test my once stable GPU OC. I had to down clock to make them stable again, even then, with my fan profile to keep the card under 70*C, the fan was hitting 100% in most games released in the last 2 years. So i decided enough was enough, and with some inspiration from here and following TuxBrothers great setup there, I bought myself an Arctic Cooling Accelero Xtreme GTX 280 and a Scythe VGA Chip Heatsink kit to make up for the inadequate sinks provided with the AC. Temps so far have proven to be 7*C cooler, but to be fair its 25*C in my room, which is 2*C up from when the leaf blower was on last night. The main benefit tho is the noise, despite the stock cooler not suffering a whining fan, 3200rpm creates a lot of turbulenance noise and is not nice when creeping around jungles, etc. As neither the scythe kit, nor the AC were properly designed for the GTX 285, I have had to make some modifications, which I've listed below. On from that are the pictures of course, which I will let do the rest of the talking.

Mods:
  • Remove GPU brace
  • Cut NVIO sink to square, drill new holes, fit push pins from scythe NVIO sink
  • Cut AC memory sink to length of main VRM area
  • Trim off-cut from above to cover remainder of VRM area
  • Bend fins to fit over S-video port





 

Devil May Cry

New Member
Joined
Apr 5, 2009
Messages
26 (0.00/day)
Hey, OnBoard what did you use to make the VRM cooler/part stick to the card after you cut it off?

EDIT: Oh sorry, silly me, it's stated in you description.
 
Last edited:

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
I found some in Norway, not sure if they ship to Sweden and it's expensive as balls.
Oh well I guess I will have to cut the stock cooler. Stupid AC for being so cheap haha.

The stock cooler remains usable after that if you cut the VRM cooler part out nicely. Warranty not so much, but will they really take the stock cooler off too, if the card just doesn't work ?)

Hey, OnBoard what did you use to make the VRM cooler/part stick to the card after you cut it off?

EDIT: Oh sorry, silly me, it's stated in you description.

Yeah, should be on first page, but it is bolted on with stock screws through the stock backplate and has Noctua NT-H1 paste between it and VRMs.
 

Devil May Cry

New Member
Joined
Apr 5, 2009
Messages
26 (0.00/day)
The stock cooler remains usable after that if you cut the VRM cooler part out nicely. Warranty not so much, but will they really take the stock cooler off too, if the card just doesn't work ?)



Yeah, should be on first page, but it is bolted on with stock screws through the stock backplate and has Noctua NT-H1 paste between it and VRMs.

I'm not using the stock backplate actually. I have the blue zalman things.
But it should work anyway.
 
Top