hat
Enthusiast
- Joined
- Nov 20, 2006
- Messages
- 21,731 (3.41/day)
- Location
- Ohio
System Name | Starlifter :: Dragonfly |
---|---|
Processor | i7 2600k 4.4GHz :: i5 10400 |
Motherboard | ASUS P8P67 Pro :: ASUS Prime H570-Plus |
Cooling | Cryorig M9 :: Stock |
Memory | 4x4GB DDR3 2133 :: 2x8GB DDR4 2400 |
Video Card(s) | PNY GTX1070 :: Integrated UHD 630 |
Storage | Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5 |
Display(s) | Onn 165hz 1080p :: Acer 1080p |
Case | Antec SOHO 1030B :: Old White Full Tower |
Audio Device(s) | Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None |
Power Supply | FSP Hydro GE 550w :: EVGA Supernova 550 |
Software | Windows 10 Pro - Plex Server on Dragonfly |
Benchmark Scores | >9000 |
I've got some plans to add cable management to my case. First, here's 2 pics of plans I skectched on the case.
The first picture are the plans for the 24-pin atx power and the PCI-E power, which will be routed behind the motherboard tray.
In the second picture, I will cut away that box to make room for SATA data and power cables. There's enough room for the first drive on the top, but there's not for the middle drive. I plan to turn the drives around so the data and power cables are in front of the case, behind the front panel. The SATA cables will come through the circular hole above the oval hole. The power cables (along with the usb cable and case power switch, led etc cables) will come through that oval hole. Also, there are these screw things that hold the hdd cage holders in place. As you can tell, there's already metal tabs ther hold them in place. I plan to drill those out so the cage holders can actually be removed.
That should make my case pretty much clean on the inside.
Too bad it's 6am right now... I want to get started! 3 cheers for dremels and drills!
The first picture are the plans for the 24-pin atx power and the PCI-E power, which will be routed behind the motherboard tray.
In the second picture, I will cut away that box to make room for SATA data and power cables. There's enough room for the first drive on the top, but there's not for the middle drive. I plan to turn the drives around so the data and power cables are in front of the case, behind the front panel. The SATA cables will come through the circular hole above the oval hole. The power cables (along with the usb cable and case power switch, led etc cables) will come through that oval hole. Also, there are these screw things that hold the hdd cage holders in place. As you can tell, there's already metal tabs ther hold them in place. I plan to drill those out so the cage holders can actually be removed.
That should make my case pretty much clean on the inside.
Too bad it's 6am right now... I want to get started! 3 cheers for dremels and drills!