- Joined
- Aug 12, 2006
- Messages
- 3,278 (0.51/day)
- Location
- UK-small Village in a Valley Near Newcastle
Processor | I9 9900KS @ 5.3Ghz |
---|---|
Motherboard | Gagabyte z390 Aorus Ultra |
Cooling | Nexxxos Nova 1080 + 360 rad |
Memory | 32Gb Crucial Balliastix RGB 4.4GHz |
Video Card(s) | MSI Gaming X Trio RTX 3090 (Bios and Shunt Modded) 2.17GHz @ 38C |
Storage | NVME / SSD RAID arrays |
Display(s) | 38" LG 38GN950-B, 27" BENQ XL2730Z 144hz 1440p, Samsung 27" 3D 1440p |
Case | Thermaltake Core series |
Power Supply | 1.6Kw Silverstone |
Mouse | Roccat Kone EMP |
Keyboard | Corsair Viper Mechanical |
Software | Windows 10 Pro |
Hi, first time posting here
I have spent ages trying to get a working overclock on this processor, finally cracked it thismorning, YEAY!
Got the processor up to 3.1 GHz from 2.4 stock using a swiftech TEC (mcw5002-64) for cooling. Im hoping to push higher but im using an asus A8R32-mvp delux mobo and im stuck with a max of 1.58V on the core, bleh.. using 260Mhz fsb + x12 multiplier
I was wondering if any1 else has the same mobo or same cpu and what are your max overclocks and voltages etc.
My setup is as follows:
Athlon64 4000+ san diego processor @ 3.1GHz (TEC cooled to -7degreez C)
2gb Corsair XMS pro 550Mhz ddr ram
A8R32-MPV delux mobo
X1900XTX @ 740Mhz core / 890Mhz mem (dangerden tyee waterblock cooled)
SATA2 Maxtor 250Gb HDD (vantec Vortex2 cooled)
Id appreciate any tips or advice concerning the mobo or processor, and also, just another point, when using my mobo at stock values, i could never get my memory to run at full 550mhz native speed, unless i directly overclocked my processor to above 2.7Ghz? otherwise the ram would just run at 500 mhz.
Thanx peeps
I have spent ages trying to get a working overclock on this processor, finally cracked it thismorning, YEAY!
Got the processor up to 3.1 GHz from 2.4 stock using a swiftech TEC (mcw5002-64) for cooling. Im hoping to push higher but im using an asus A8R32-mvp delux mobo and im stuck with a max of 1.58V on the core, bleh.. using 260Mhz fsb + x12 multiplier
I was wondering if any1 else has the same mobo or same cpu and what are your max overclocks and voltages etc.
My setup is as follows:
Athlon64 4000+ san diego processor @ 3.1GHz (TEC cooled to -7degreez C)
2gb Corsair XMS pro 550Mhz ddr ram
A8R32-MPV delux mobo
X1900XTX @ 740Mhz core / 890Mhz mem (dangerden tyee waterblock cooled)
SATA2 Maxtor 250Gb HDD (vantec Vortex2 cooled)
Id appreciate any tips or advice concerning the mobo or processor, and also, just another point, when using my mobo at stock values, i could never get my memory to run at full 550mhz native speed, unless i directly overclocked my processor to above 2.7Ghz? otherwise the ram would just run at 500 mhz.
Thanx peeps