AMD FX OC'ers Club

[Johan45]

in those ambients, wouldn't it be as good as a passive (no-fans) rad?

be like a chunk of frozen metal, and water through it lol

Ya probably. When I was rinsing it out with boiling water last night it only took a couple minutes to cool off enough to handle. You could really feel the heat coming from it. But I figured there was no sense in going halfway. That's why I went for the 140s over the 220s. More CFM and static pressure. I got them for $8 each in a clearance sale.
Now it'll be like a chunk of frozen metal going 40 MPH He he he

 

[Johan45]

It's official the Crosshair V Formula-z will be in the mail on Monday. Whoot whoot!!

 

[Random Murderer]

It's official the Crosshair V Formula-z will be in the mail on Monday. Whoot whoot!!

and here come the 6GHz screenies...

 

[d1nky]

and here come the 6GHz screenies...

not before I do!

 

[Johan45]

not before I do!

Oh really!!!!
I'm grabbing another SSD and a 2x2 set of ram tomorrow. I'm gonna make this bitch beg for mercy.

 

[d1nky]

Oh really!!!!
I'm grabbing another SSD and a 2x2 set of ram tomorrow. I'm gonna make this bitch beg for mercy.

im being helpful and crunching, so itll have to wait for a few days lol

ive had 5750mhz benching before, but never took a screenshot

 

[Johan45]

im being helpful and crunching, so itll have to wait for a few days lol

ive had 5750mhz benching before, but never took a screenshot

Very nice. That was 1 core right??? if you have CPU-z open all you have to do is hit f7 I think to save a validation.
I'm hoping to get all my stuff set up and have 3 rigs going for the F@H Chimp challenge when it gets here. That's one sure way to find any kind of instability if you have it. 10 days straight 24/7crunching.

 

[d1nky]

all 8 cores....

yea im impressed with this chip/rig its crunching 100% 4.875ghz and I can still play games like normal, and temps just around 50*c

 

[Durvelle27]

all 8 cores....

yea im impressed with this chip/rig its crunching 100% 4.875ghz and I can still play games like normal, and temps just around 50*c

Show off.

 

[Hnykill22]

I only got my FX 8350 @ 4.2 Ghz , 240 FSB , 1.368 V ... i.ve been raising the Front Side Bus (FSB) since Pentium 1 and 2.. rather then just using the Multiplier to overclock. Mhz is the speed of the Processor but FSB is the width it uses.

I also tried 4.6 Ghz at 200 FSB and it was a little slower in 3Dmark 2013.. so a good mixture of the 2 is optimal.

 

[Durvelle27]

I only got my FX 8350 @ 4.2 Ghz , 240 FSB , 1.368 V ... i.ve been raising the Front Side Bus (FSB) since Pentium 1 and 2.. rather then just using the Multiplier to overclock. Mhz is the speed of the Processor but FSB is the width it uses.

I also tried 4.6 Ghz at 200 FSB and it was a little slower in 3Dmark 2013.. so a good mixture of the 2 is optimal.

Nice tip bud but most of us here already know this. I was using 300FSB when I was at 5.1 GHz

 

[Johan45]

all 8 cores....

yea im impressed with this chip/rig its crunching 100% 4.875ghz and I can still play games like normal, and temps just around 50*c

What are you feeding that thing. I told you you had a nice chip.

Nice tip bud but most of us here already know this. I was using 300FSB when I was at 5.1 GHz

Yep all the way Durvelle. I never run below 250 and a lot higher benching.

 

[Pill Monster]

 

[Johan45]

Nice clock Pillmonster.
Hey D1nky got the rad and all set up on the weekend.
You can have a look here in you're interested. http://www.overclockers.com/forums/showthread.php?t=731320&page=43
Starts at post # 857.

 

[Pill Monster]

Nice clock Pillmonster.
Hey D1nky got the rad and all set up on the weekend.
You can have a look here in you're interested. http://www.overclockers.com/forums/showthread.php?t=731320&page=43
Starts at post # 857.

Thanks.

4.8 is highest I can go 24/7 tho, since I'm on air (CM Hyper N620/HAF XM).

 

[d1nky]

Nice clock Pillmonster.
Hey D1nky got the rad and all set up on the weekend.
You can have a look here in you're interested. http://www.overclockers.com/forums/showthread.php?t=731320&page=43
Starts at post # 857.

that's friggin madness! im going to keep a close eye on your hwbot lol although ya probably mention that im beat before I know it

that site looks pretty good, might have to join as well. I remember about 10 - 12 months back when I started learning overclocking I was reading threads from that site for Fx overclocking, and about the fatality. recognise a few names as well...

people hate the fact that I been overclocking/benching for about 10 months lol

 

[Johan45]

that's friggin madness! im going to keep a close eye on your hwbot lol although ya probably mention that im beat before I know it

that site looks pretty good, might have to join as well. I remember about 10 - 12 months back when I started learning overclocking I was reading threads from that site for Fx overclocking, and about the fatality. recognise a few names as well...

people hate the fact that I been overclocking/benching for about 10 months lol

I tried it out a bit yesterday but it was pretty warm out 18c at 4.8 with 1.45 v it was just hitting 30c on the cores. I can't wait till I get some good cold weather. Then I'll be coming for ya.
OCF is a great site. Lots of smart guys there.
I also picked up an ASUS R9 270x DCUII for some reason. Not really impressed with it yet but I think I have some kind of driver issue or something. Just think it should be doing quite a bit better than it is.

How's the lungs doing this week. Any better??

 

[Pill Monster]

that's friggin madness! im going to keep a close eye on your hwbot lol although ya probably mention that im beat before I know it

that site looks pretty good, might have to join as well.

Lol...are you talking about OCUK?

 

[d1nky]

I tried it out a bit yesterday but it was pretty warm out 18c at 4.8 with 1.45 v it was just hitting 30c on the cores. I can't wait till I get some good cold weather. Then I'll be coming for ya.
OCF is a great site. Lots of smart guys there.
I also picked up an ASUS R9 270x DCUII for some reason. Not really impressed with it yet but I think I have some kind of driver issue or something. Just think it should be doing quite a bit better than it is.

How's the lungs doing this week. Any better??

isn't the 270x a replacement for the 7770?! in which case I been there and done that, what a let-down. I went 7770 - 7870 - 7950, just the previous ones were such a waste of cash and performance was poor, maybe coupled with a 3930k like in the reviews would have been good but I wasn't impressed.

is your loop long enough for the rad outside? and I don't think that site is big enough for 2 of us to be benching like we do LOL

the lungs are better actually, the fever part is gone but im still coughing and choking a lot.

Are you talking about OCN?

overclockers.com

 

[Johan45]

isn't the 270x a replacement for the 7770?! in which case I been there and done that, what a let-down. I went 7770 - 7870 - 7950, just the previous ones were such a waste of cash and performance was poor, maybe coupled with a 3930k like in the reviews would have been good but I wasn't impressed.

is your loop long enough for the rad outside? and I don't think that site is big enough for 2 of us to be benching like we do LOL

the lungs are better actually, the fever part is gone but im still coughing and choking a lot.




overclockers.com

It's funny on the reviews it comes in just behind the 670s but in real life it's nowhere close. I'm going to try a new install and the latest drivers to see if I somehow just screwed up the drivers. I've had the Nvidias going on that install
Don't worry I made sure there was enough tubing. Ha ha ha
Glad you're getting better.

 

[suraswami]

I tried it out a bit yesterday but it was pretty warm out 18c at 4.8 with 1.45 v it was just hitting 30c on the cores. I can't wait till I get some good cold weather. Then I'll be coming for ya.
OCF is a great site. Lots of smart guys there.
I also picked up an ASUS R9 270x DCUII for some reason. Not really impressed with it yet but I think I have some kind of driver issue or something. Just think it should be doing quite a bit better than it is.

How's the lungs doing this week. Any better??

isn't the 270x a replacement for the 7770?! in which case I been there and done that, what a let-down. I went 7770 - 7870 - 7950, just the previous ones were such a waste of cash and performance was poor, maybe coupled with a 3930k like in the reviews would have been good but I wasn't impressed.

is your loop long enough for the rad outside? and I don't think that site is big enough for 2 of us to be benching like we do LOL

the lungs are better actually, the fever part is gone but im still coughing and choking a lot.




overclockers.com

270X = Overclocked 7870.

 

[Pill Monster]

isn't the 270x a replacement for the 7770?! in which case I been there and done that, what a let-down. I went 7770 - 7870 - 7950, just the previous ones were such a waste of cash and performance was poor, maybe coupled with a 3930k like in the reviews would have been good but I wasn't impressed.

is your loop long enough for the rad outside? and I don't think that site is big enough for 2 of us to be benching like we do LOL

the lungs are better actually, the fever part is gone but im still coughing and choking a lot.




overclockers.com

Yeah...same as OCUK.

 

[Johan45]

Yeah...same as OCUK.

Not sure it is. This is the place I speak of. http://www.overclockers.com/forums/

 

[Durvelle27]

Highest OC i can get without PC shutting down from Over-volt protection

http://valid.canardpc.com/405j3a

 

[Johan45]

Highest OC i can get without PC shutting down from Over-volt protection

http://valid.canardpc.com/405j3a

Nice work Durvelle. Not sure if this is what you're talking about or if your board is the same but if you go into your monitoring section, find the CPU voltage and set it to ignore. This section is what keeps your computer safe.
I take no responsibility if you blow anything up but that's what I have to do to go over 1.6v