AMD FX OC'ers Club

d1nky · Nov 6, 2013

if I don't sell this pc, and get a pot at some point before xmas... I will!

I had some time off work so cant get one yet, but it will be done.. our chips are pretty decent for overclocking to stupid speeds on water so I bet they'll be even better subzero

Irony · Nov 6, 2013

Do they always use ln2 for subzero stuff? It's kinda expensive. lol

You could use liquid propane. It only gets to -42C but but its cheap and easy to get. And highly flammable I guess..

cdawall · Nov 6, 2013

Irony said:
Do they always use ln2 for subzero stuff? It's kinda expensive. lol

You could use liquid propane. It only gets to -42C but but its cheap and easy to get. And highly flammable I guess..

Why bother with that DICE gets down to -78.5C

cdawall · Nov 7, 2013

Holy PITA all up and running, but only using an H100i right now so temps aren't as awesome as I am used to.

suraswami · Nov 7, 2013

cdawall said:
http://img.techpowerup.org/131106/Capture026633.jpg

Holy PITA all up and running, but only using an H100i right now so temps aren't as awesome as I am used to.

Just curious, what are the temps?

Johan45 · Nov 7, 2013

cdawall said:
http://img.techpowerup.org/131106/Capture026633.jpg

Holy PITA all up and running, but only using an H100i right now so temps aren't as awesome as I am used to.

At least you finally have that thing up and running. :toast:

cdawall · Nov 7, 2013

suraswami said:
Just curious, what are the temps?

At 5.1ghz the light load was under 50c, but its rather cool in the house.

Johan45 said:
At least you finally have that thing up and running.

No kidding its still got an occasional glitch. Knowing me I probably already made my vrms sad.

cdawall · Nov 7, 2013

What is the min voltages everyone is getting on their chips for 5ghz stable?

d1nky · Nov 7, 2013

1.55 - 1.6v for 5ghz depends on cpunb/ram as well

ill do a 5ghz superpi 32m run on my setup this weekend, ill hopefully set the pace and post it on the thread!

cdawall · Nov 7, 2013

d1nky said:
1.55 - 1.6v for 5ghz depends on cpunb/ram as well

ill do a 5ghz superpi 32m run on my setup this weekend, ill hopefully set the pace and post it on the thread!

Really? I have been trying to get under 1.5v stable with mine. So far I can play games at 1.465v temps don't seem as bad as I thought they would be. 45C load isn't bad.

I was going to try these settings for hwbot, but the clockgen shoots to high :/

d1nky · Nov 8, 2013

cdawall said:
Really? I have been trying to get under 1.5v stable with mine. So far I can play games at 1.465v temps don't seem as bad as I thought they would be. 45C load isn't bad.

http://img.techpowerup.org/131107/Capture030445.jpg

I was going to try these settings for hwbot, but the clockgen shoots to high :/

ive seen that 9370 needs less volts for a fully stable 5ghz, for 4.88ghz I need 1.53v and that's prime95 for hours and crunching for days. that kind of stability.

just make sure you keep under 5000.5 ghz for the comp. when I got time ill try and do a run.

tbh johan would probably beat my score, then ill beat his

cdawall · Nov 8, 2013

d1nky said:
ive seen that 9370 needs less volts for a fully stable 5ghz, for 4.88ghz I need 1.53v and that's prime95 for hours and crunching for days. that kind of stability.

just make sure you keep under 5000.5 ghz for the comp. when I got time ill try and do a run.

tbh johan would probably beat my score, then ill beat his

Now my question is do I try tighter timings with sammy low pro's or stupid high clocks with hynix...

Johan45 · Nov 8, 2013

Like D1nky says prime really kicks the crap out of these processors. I can run Cinebench with my 9370 at almost 5.1 and 1.368v

But prime stable is 1.524

d1nky · Nov 8, 2013

cdawall said:
Now my question is do I try tighter timings with sammy low pro's or stupid high clocks with hynix...

depends on the mems and bench, I find benches with all 8cores use the speed but the single core benches like tight ram

but then again I can get higher cpu clocks with looser/faster ram

but I did learn its mainly about the IC's on the ram itself

cdawall · Nov 8, 2013

Mine are low binned ones of these

http://forum.hwbot.org/showthread.php?t=36426

Johan45 · Nov 8, 2013

cdawall said:
Mine are low binned ones of these

http://forum.hwbot.org/showthread.php?t=36426

Nice

cdawall · Nov 8, 2013

Having issues with this chip kicking the NB up high pretty sure the memory isn't the limit on this.

suraswami · Nov 8, 2013

cdawall said:
Having issues with this chip kicking the NB up high pretty sure the memory isn't the limit on this.

http://img.techpowerup.org/131107/Capture031883.jpg

http://img.techpowerup.org/131107/20131107_170521.jpg

lol, u killed the memory chip :eek:

Had my stupid Sabertooth worked I would also have some fun OCing my 8320.

Still in dilemma (last day today), return it or RMA to Asus hrrrr :mad:

cdawall · Nov 8, 2013

Its just glue from the heatspreader lol

suraswami · Nov 8, 2013

cdawall said:
Its just glue from the heatspreader lol

ha ha then blow up the next county's power grid!

OC moar! :rockout:

Johan45 · Nov 8, 2013

cdawall said:
Having issues with this chip kicking the NB up high pretty sure the memory isn't the limit on this.

http://img.techpowerup.org/131107/Capture031883.jpg

http://img.techpowerup.org/131107/20131107_170521.jpg

Not sure what you mean by kicking the NB up, but it's very sensitive to volts if it's anything like mine. Doesn't need anywhere near what the 8350 does. I can run it at 3000 with 1.35v and 2700 is around 1.28v

d1nky · Nov 8, 2013

IRONNNYYYYY - i just saw a pic of your rig on hwbot and you got the ram in the wrong slots!

i use the black slots and tested the other way, maybe try it ion the black slots!

JOHANNNN - benching today, hopefully get a few more 1st places from you lol

cdawall · Nov 8, 2013

Johan45 said:
Not sure what you mean by kicking the NB up, but it's very sensitive to volts if it's anything like mine. Doesn't need anywhere near what the 8350 does. I can run it at 3000 with 1.35v and 2700 is around 1.28v

I don't want to push the volts high enough for 3000 stable tried to 1.4v vnb with 1.462v vcpu cpu@5ghz. Could be the ram speed though that's with ram at 2463 cas 11.

Will worry about that later going through the ram one by one to get max 32m speeds of each stick.

edit:

I should have bought more of these when they were cheap

suraswami · Nov 8, 2013

Returned the Sabertooth due to funds depleted in buying the $99 Nexus 32GB deal lol.

May be I will revisit this during Christmas.

cdawall · Nov 8, 2013

Now who can name these modules?

System Name	Zotan
Processor	i9-10850K
Motherboard	Gigabyte Z490 Gaming X AX
Cooling	H100
Memory	32GB Viper 3200
Video Card(s)	Zotac RTX3080
Case	Airflow 275R
Power Supply	RMX850
Benchmark Scores	d1nky@hwbot.org

System Name	Torquey Vulture
Processor	Ryzen 5 2600
Motherboard	Gigabyte B450 MiniITX
Cooling	DDC water loop, EK block
Memory	16GB Patriot Viper RGB
Video Card(s)	EVGA 1070
Storage	500gb NVME; some Phat HDDs
Display(s)	Achieva Shimian 27" 2560x1440
Case	Thermaltake V1 MiniITX
Power Supply	EVGA supernova 850 G2
Mouse	Corsair Harpoon
Keyboard	Possibly the cheapest you can buy. Shift key broke recently. Space sounds like I'm kicking a ham
Software	Windows 10

System Name	All the cores
Processor	2990WX
Motherboard	Asrock X399M
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory	4x16GB G.Skill 3600
Video Card(s)	(2) EVGA SC BLACK 1080Ti's
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s)	Dell UP2414Q 3840X2160@60hz
Case	Caselabs Mercury S5+pedestal
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w
Mouse	Thermaltake Theron, Steam controller
Keyboard	Keychron K8
Software	W10P

System Name	All the cores
Processor	2990WX
Motherboard	Asrock X399M
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory	4x16GB G.Skill 3600
Video Card(s)	(2) EVGA SC BLACK 1080Ti's
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s)	Dell UP2414Q 3840X2160@60hz
Case	Caselabs Mercury S5+pedestal
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w
Mouse	Thermaltake Theron, Steam controller
Keyboard	Keychron K8
Software	W10P

System Name	---
Processor	FX 8350 @ 4.00 Ghz with 1.28v
Motherboard	Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling	Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory	Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s)	Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage	Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s)	3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case	AeroCool XPredator X3
Audio Device(s)	Built-in Realtek
Power Supply	Corsair HX1000 Modular
Software	Windows 10 Pro 64 bit

AMD FX OC'ers Club

d1nky

Irony

cdawall

where the hell are my stars

cdawall

where the hell are my stars

suraswami

Johan45

cdawall

where the hell are my stars

cdawall

where the hell are my stars

d1nky

cdawall

where the hell are my stars

d1nky

cdawall

where the hell are my stars

Johan45

d1nky

cdawall

where the hell are my stars

Johan45

cdawall

where the hell are my stars

suraswami

cdawall

where the hell are my stars

suraswami

Johan45

d1nky

cdawall

where the hell are my stars

suraswami

cdawall

where the hell are my stars

System Name	Gamer/ HTPC
Processor	AMD Ryzen 5 2600
Motherboard	ROG Crosshair VI
Cooling	Alphacool Eisbaer 420 AIO
Memory	G.Skill TridentZ RGB 2x8GB 3333 CL14
Video Card(s)	Gigabyte Aorus RX 580
Storage	Corsair Neutron 480 GB
Display(s)	Samsung 42" 1080p
Case	Phanteks Enthoo Luxe Tempered Glass
Power Supply	Corsair 750
Software	Win10 Pro
Benchmark Scores	http://hwbot.org/user/johan45/