AMD Indexed Overclock Speeds

[p_o_s_pc]

Here you go my Cool X2 5600 Windsor @ 3.5 Ghz

HTT Speed - 1000
Multiplier - 14
Memory type and speed - Kingston ValueRam DDR2 800 @ DDR2 1000
FSB - 250
CPU Voltage - 1.376
Motherboard Type/Brand - Biostar TF8200A
CPU Type - X2 5600 Windsor
Memory timings - 6-6-6-18-2T
Cooling - Xigmatek S1283 cooler with Raidmax Magma Red fan

hell of a chip you have there! willing to sell/trade?

 

[FreedomEclipse]

Right A bit late - but I never realised there was a topic like this So.....

* HTT Speed - 939.2Mhz

* Multiplier - x8.5

* Memory type and speed - 2x 1Gb Corsair PC3200 XL Pro 2x 1Gb OCZ Platinum Edition Rev.2 {ALL} @ 241.9Mhz

* FSB - 313.08Mhz

* CPU Voltage - 1.39-1.45v

* Motherboard Type/Brand - Asus A8n32 Deluxe

* CPU Type - skt.939 AMD A64 X2 3800+ Manchester 2Ghz @ 2661Mhz

* Memory timings - 3-3-3-8

* Cooling - Thermaltake Big Typhoon


I believe the Crown for the 'Manchester Speed King' goes to me

my CPU validation link is just above my sig - Im pretty proud of this O/C

 

[JC316]

Right A bit late - but I never realised there was a topic like this So.....

It's fine, I update pretty regularly. I added you in and yes, you are the manchester speed king.

 

[p_o_s_pc]

CPU Speed: 3500MHz
Multiplier: 12.5
speed:500@ 5-5-5-11@2.2v
FSB: 280mhz
CPU Voltage: 1.61v
Motherboard Biostar TA790GX A2+
CPU Type: AM2
Memory timings: 5-5-5-11
Cooling:Xigmatek HDTs1283

CPU-Z
http://valid.canardpc.com/show_oc.php?id=507197

 

[crunchie]

Did this a few months ago when it was a little cooler.

• HTT = 3x = 1050MHz
• Multiplier = 9
• Memory type and speed = OCZ PC4000
• FSB = 350
• CPU Voltage = 1.472
• Motherboard Type/Brand = DFI LP UT nF4 Ultra-D
• CPU Type = Opteron 165
• Memory timings = 3-3-3-6 1T
• Cooling = Water

 

[Darknova]

Current OC (3Ghz):

HTT = 230Mhz
Multi = 13
Voltage = 1.376v

I've also had it running at 3.25Ghz:

HTT = 250Mhz
Multi = 13
Voltages = 1.4v

 

[FilipM]

3.25V, dude, lol, correct that. Nice OC though

 

[Darknova]

3.25V, dude, lol, correct that. Nice OC though

Nice catch. Updated

 

[JC316]

Current OC (3Ghz):

HTT = 230Mhz
Multi = 13
Voltage = 1.376v

I've also had it running at 3.25Ghz:

HTT = 250Mhz
Multi = 13
Voltages = 1.4v

What chip is that? Your tollman?

 

[Darknova]

What chip is that? Your tollman?

Yup

 

[p_o_s_pc]

average clock speed for the Brisbane is 3168mhz just wanted to point that out. Will get the rest for you shortly

EDIT Brisbane average clock 3168mhz average volt 1.46

 

[JC316]

average clock speed for the Brisbane is 3168mhz just wanted to point that out. Will get the rest for you shortly

EDIT Brisbane average clock 3168mhz average volt 1.46

Thanks. I will average everything out once a month. Just too much trouble to average every time someone posts.

 

[pagalms]

Crappy peace of chip. Can't get past 3,2GHz whatever i do on two different boards.

 

[Darknova]

That's average for Phenom I's though. You won't see many chips reaching the 3.4-3.6Ghz range. That's a good overclock for a Phenom I.

 

[crtecha]

Brisbane Baby!!

 

[tong]

First run:

HTT: 1040
Multi: 13x
Gskill DDR2: 1066
FSB: 260
CPU voltage: Stock
MB: Gigabyte GA-MA790GP-DS4H
CPU Type: AMD Athlon 64 X2 6000+ AM2 Brisbane
Memory Timings: 5-5-5-15
Cooling: Water

 

[Ahhzz]

Did this a few months ago when it was a little cooler.

• HTT = 3x = 1050MHz
• Multiplier = 9
• Memory type and speed = OCZ PC4000
• FSB = 350
• CPU Voltage = 1.472
• Motherboard Type/Brand = DFI LP UT nF4 Ultra-D
• CPU Type = Opteron 165
• Memory timings = 3-3-3-6 1T
• Cooling = Water

Dude...impressive numbers. My Denmark Opty topped out at 2700 or so stable. 'Course, you're running water, and I'm on air, but still.

I'm curious. My temps were still running very cool, but I went unstable, locking, restart, etc. What's the likely culprit for something like that if it's not obviously overheating?

 

[Darknova]

JC316! You need to update the Toliman chart. I have the highest overclock

 

[un-nefer]

Nothing truely special, but it seems @2630Mhz is the stable limit of the F2 Windsor 90nm 4200+

On air, I can achieve the same speed, but temps awere too high and at anything above 50c stability suffered, so I had to switch to a cheap water cooling kit to keep temps below 50c.

Maybe with a little more tweaking I'll be able to pass 2700 Mhz, but I've alread had to increase core voltage to 1.550v (bios max) and add 0.1v to all HTT to keep it stable as it is, so all that is left is to increase HTT voltages to +0.4 but with no more cpu core voltage I don't think anything higher and stable is possible.

After all the effort of getting the 2630Mhz stable, I just don't think the old F2 90nm Windsor cores have much left - maybe someone else has a few tricks or pointers for me that I could try to get better overclock results from a F2 Windsor 90nm cpu??

Still, a 20% overclock is nothing to complain about I guess.

• Overclock speed = 2630.2 Mhz
• Original CPU speed = 2200 Mhz
• Overclock percent = 20%
• CPU type = AMD 4200+ (F2 Windsor 90nm)
• Mainboard = Gigabyte GA-M59SLI-S5 (Bios: Award BIOS M59SLI-S5 F8)
• CPU Multiplier = 11
• CPU Voltage = 1.550
• Bus speed = 239 (actually set 240 in bios)
• Memory type= G.Skill 2x1GB (F2-6400PHU1-1GBHZ)
• Memory timings = 5-5-5-18-26 1T
• Memory voltage = +0.4
• HTT = 956
• HTT voltage = +0.1 (all of them)
• CPU <--> nForce SPP = 4x
• nForce SPP --> nForce MCP = 4x
• nForce SPP <-- nForce MCP = 4x
• Cooling = Thermaltake Big Water 735 (original with single/small radiator)
• CPU temp idle = 34c
• CPU temp load = 41c

Note: All overclocking done via bios and not via Gigabyte's easy tune 5 pro. The easy tune 5 pro utility is ok for sub 10% overclocks, but lacks all the required options to be able to tweak things and achive anything above 10% stable. I also found that even at 10% overclock sometimes it would boot into windows for days and then at other times it would blue screen. I only use it for visual reference of bios settings and temps.

 

[King_Jay16]

Phenom 9950 (Agena)


CPU FREQUENCY= 3312MHZ/3.312GHZ

HTT= 1863.7MHZ
MULTI=X16
MEMORY-= G.SKILL 4GB PC-8500 RUNNING AT 1104MHZ
FSB= 207
CPU VOLTS= 1.45V
MOBO=ASUS M3A78-T
MEMORY TIMINGS= 5-5-5-5-15
COOLING= ZALMAN 9700NT

 

[Wile E]

Nothing truely special, but it seems @2630Mhz is the stable limit of the F2 Windsor 90nm 4200+

On air, I can achieve the same speed, but temps awere too high and at anything above 50c stability suffered, so I had to switch to a cheap water cooling kit to keep temps below 50c.

Maybe with a little more tweaking I'll be able to pass 2700 Mhz, but I've alread had to increase core voltage to 1.550v (bios max) and add 0.1v to all HTT to keep it stable as it is, so all that is left is to increase HTT voltages to +0.4 but with no more cpu core voltage I don't think anything higher and stable is possible.

After all the effort of getting the 2630Mhz stable, I just don't think the old F2 90nm Windsor cores have much left - maybe someone else has a few tricks or pointers for me that I could try to get better overclock results from a F2 Windsor 90nm cpu??

Still, a 20% overclock is nothing to complain about I guess.

• Overclock speed = 2630.2 Mhz
• Original CPU speed = 2200 Mhz
• Overclock percent = 20%
• CPU type = AMD 4200+ (F2 Windsor 90nm)
• Mainboard = Gigabyte GA-M59SLI-S5 (Bios: Award BIOS M59SLI-S5 F8)
• CPU Multiplier = 11
• CPU Voltage = 1.550
• Bus speed = 239 (actually set 240 in bios)
• Memory type= G.Skill 2x1GB (F2-6400PHU1-1GBHZ)
• Memory timings = 5-5-5-18-26 1T
• Memory voltage = +0.4
• HTT = 956
• HTT voltage = +0.1 (all of them)
• CPU <--> nForce SPP = 4x
• nForce SPP --> nForce MCP = 4x
• nForce SPP <-- nForce MCP = 4x
• Cooling = Thermaltake Big Water 735 (original with single/small radiator)
• CPU temp idle = 34c
• CPU temp load = 41c

http://img16.imageshack.us/img16/2886/oc26302mhz.jpg

http://img12.imageshack.us/img12/3113/oc26302mhzhealth.jpg





Note: All overclocking done via bios and not via Gigabyte's easy tune 5 pro. The easy tune 5 pro utility is ok for sub 10% overclocks, but lacks all the required options to be able to tweak things and achive anything above 10% stable. I also found that even at 10% overclock sometimes it would boot into windows for days and then at other times it would blue screen. I only use it for visual reference of bios settings and temps.

It's pretty rare to find a non-FX62 F2 that wants to run stable above around 2.7GHz. My old F2800+ would do almost exactly the same clock as yours perfectly stable on only 1.4V. No amount of voltage would make it stable above that tho. I could run 2840 for some benches here and there, but nowhere near 24/7 stable.

 

[un-nefer]

cheers for the reply. Yeah, I tried lower voltages but got random blue screens, so I bumped it to the max my board could provide and then bumped up the HTT voltages a little as well. I run it like this 24/7 now and it hasn't blue screened yet.

I'm now looking to upgrade, but I was scammed buy Gigabyte with their GA-M59SLI-S5 mainboard not supporting am2+ (although the shop, the box and everything at the time said it would). So I'm now limited to either the 6400+ BE or whatever the fastest brisbane core was.

I'll prolly just go the 6400+ though and try and clock it up as close to 3.5Ghz as I can until I can find the cash to fully upgrade to AM3/DDR3 combo when more mainboards are released.

 

[p_o_s_pc]

I think i have the lowest voltage 3ghz (24/7) clock for a Brisbane
* HTT Speed-1000
* Multiplier-12x
* Memory type and speed- Patriot EP DDR2 800 @ DDR2 1000
* FSB-250
* CPU Voltage-1.296
* Motherboard Type/Brand-Biostar 790GX A2+/AM2+
* CPU Type-AMD x2 4850e
* Memory timings- 5-5-5-12
* Cooling-Thermal Take V1 lapped


This overclock is 24/7 stable have orthos in the SS to show that it has been stressed.also it has been running F@H SMP 24/7 at this setting for about 3 days and no problems.haven't had any BSOD or hangs

 

[Master}{]

Manchester: 2852.18 Mhz I did that one long time ago!!!
http://valid.canardpc.com/show_oc.php?id=147648

Phenom II 940: 4071.49
http://valid.canardpc.com/show_oc.php?id=540253

Phenom II 955: 4071.53
http://valid.canardpc.com/show_oc.php?id=572625

 

[curt]

hey heres my cpu.s

maby i can break some more records [i still hold the fastest amd barton core]at 2816mh

im not shure where all my pics ar but for now im puttin up my gamer system opty 165 1.8gh

running 3014mh 24/7 an my fsb of 338 [on a home made water cooling unit]

ram is ocz platinum ddr 400 running 246 real mh an stuped low cas timming.s

video at time of pics was 8800gts 640 [now i have a gtx280]

same dfi expert nforce4 board

found some so see where i come in

[note] in one of the pics u can see i was useing 1.6v on the opty 180 to get 2900

both the other cpu.s my opty 165 an the 4000+ both max out for me at around 3300mh