AMD Phenom 11 x4 965

[Darkrix]

ok off topic AMD Phenom II X4 975BE
ok normally in games i use theese settings..only multiplier and some fsb changed MB does the rest oc voltages..
http://valid.canardpc.com/show_oc.php?id=1826159
max what i got with air..
http://valid.canardpc.com/show_oc.php?id=1818905
because dint have the balls to hit more voltage to prosessor..
ok but im running games with that 4.1ghz 24/7 with no problems useing high tech air cooling, not the best in the markt but 10 times better than ORG..
here is some Results.
http://3dmark.com/3dm11/1221358?show_ads=true&page=/3dm11/1221358?key=c3sEkwChk4hfxYVk2wcTTEdhuLh5LT
and Vantage
http://3dmark.com/3dmv/3173729?show_ads=true&page=/3dmv/3173729?key=8sX9MxhdUqNnqYKrQtYdNe7ja0r385

maby i should test the NB and HT OC too.. dont really care all gaes are running with Full HD every think in MAX setting just fine.. thx t Asus from this great MB


i have Coolermaster hyper 212+ with two fans all dimms usable and systemn stays cool max cpu temp is 54c all cores 100% load system is quite low noice im useing those Noctua NF-P12 fans in it.

 

[cookiemonster]

What cooler do you think i should go for

 

[JrRacinFan]

http://www.scan.co.uk/products/cors...cpu-cooler-intel-lga-775-1366-1156-amdam2-am3

It cools very similar to a Thermaltake Frio.

 

[cookiemonster]

Hi JrRacinFan I was originally thinking of getting the Corsair H70 what is your opinion,

http://www.scan.co.uk/products/cors...an-cpu-cooler-intel-775-1366-1156-amd-am2-am3

 

[JrRacinFan]

H70? You linked an A70. The A70 is just that much better than the A50, I like it but hate the size of both tbh. Odds are either one will block 2 dimms on motherboards. Maybe can get a Coolermaster Hyper 212+??

Found it!
http://www.scan.co.uk/products/cool...ce=google+shopping&utm_medium=google+shopping

Here is some reading material for you. I trust & respect the reviewer. Good friend of mine.
http://www.tweaktown.com/reviews/2904/cooler_master_hyper_212_plus_cpu_cooler/index6.html

 

[micropage7]

one that you need to check is the heat
usually when you push about 10% it will ok but it higher than that you should consider aftermarket cooler

 

[cookiemonster]

Hi I suppose if i got the Corsair Cooling Air Series A50 CPU Cooler I could allways put another fan onto it if need be, this is getting mind bogling there are so many and to make matters worse i looked at the Thermaltake Frio and it also looks quite easy to fit, decisions decisions.

 

[Montalva]

ok off topic AMD Phenom II X4 975BE
ok normally in games i use theese settings..only multiplier and some fsb changed MB does the rest oc voltages..
http://valid.canardpc.com/show_oc.php?id=1826159
max what i got with air..
http://valid.canardpc.com/show_oc.php?id=1818905
because dint have the balls to hit more voltage to prosessor..
ok but im running games with that 4.1ghz 24/7 with no problems useing high tech air cooling, not the best in the markt but 10 times better than ORG..
here is some Results.
http://3dmark.com/3dm11/1221358?show_ads=true&page=/3dm11/1221358?key=c3sEkwChk4hfxYVk2wcTTEdhuLh5LT
and Vantage
http://3dmark.com/3dmv/3173729?show_ads=true&page=/3dmv/3173729?key=8sX9MxhdUqNnqYKrQtYdNe7ja0r385

maby i should test the NB and HT OC too.. dont really care all gaes are running with Full HD every think in MAX setting just fine.. thx t Asus from this great MB


i have Coolermaster hyper 212+ with two fans all dimms usable and systemn stays cool max cpu temp is 54c all cores 100% load system is quite low noice im useing those Noctua NF-P12 fans in it.

hey man can you write all your bios setting you used for the 4.1ghz oc? and what rams did you use?

 

[Darkrix]

hey man can you write all your bios setting you used for the 4.1ghz oc? and what rams did you use?

ALL

ok cpu OC manual
Multiplier 20.5
FSB 201
DRAM 1600mhz
Dram settings can be auto becuse i have G skill 1600mhz memory with 7 8 7 24 settings
and second set is 7 7 7 24 settings
http://www.jimmspc-store.fi/tuoteinfo/F3-12800CL7D-4GBRM?pid=1305989592928
DRAM voltage 1.65v
everything else is AUTO.
and u only get benefit from my bios settings if u have same MB as i do u can see it from my System Spec..

 

[Montalva]

ALL

ok cpu OC manual
Multiplier 20.5
FSB 201
DRAM 1600mhz
Dram settings can be auto becuse i have G skill 1600mhz memory with 7 8 7 24 settings
and second set is 7 7 7 24 settings
http://www.jimmspc-store.fi/tuoteinfo/F3-12800CL7D-4GBRM?pid=1305989592928
DRAM voltage 1.65v
everything else is AUTO.
and u only get benefit from my bios settings if u have same MB as i do u can see it from my System Spec..

every thin els auto?? how is it possible

 

[Darkrix]

every thin els auto?? how is it possible

what u mean ok ill go to BIOS and take some PICTURES for u all OK..

 

[Montalva]

i used this setings
cpu mP 20
ddr 1333
cpunb 2000
ht link 2000
*extreme engine settings*
full
on
500
full
full
on

cpu volt 1.5

and still cant get it stable

 

[Montalva]

what u mean ok ill go to BIOS and take some PICTURES for u all OK..

pls halp me!

 

[Darkrix]

i used this setings
cpu mP 20
ddr 1333
cpunb 2000
ht link 2000
*extreme engine settings*
full
on
500
full
full
on

cpu volt 1.5

and still cant get it stable

Strange but ill send pictures soon from OC page off my BIOS

 

[Darkrix]

ok here is some pictures from my bios.
i hope they help u but i doubt it. so my MB over voltages the CPU automated as the CPU needs more it gives more voltage to it.. its useing 1.48-1.50v at 4151mhz

i can allso take some screen shots from Turbo V evo it shows much inffo too

 

[Montalva]

ok here is some pictures from my bios.
i hope they help u but i doubt it. so my MB over voltages the CPU automated as the CPU needs more it gives more voltage to it.. its useing 1.48-1.50v at 4151mhz

i can allso take some screen shots from Turbo V evo it shows much inffo too

damn man you must have a engineering sample or somthing,

 

[Darkrix]

and btw i can go 4300mhz with theese voltages and its stable but no perfromance gain at games and then the temps go higher and i like it cooler..



check the Voltage diffrence from 4.1 to 4.3 its guite nothing but its a bit..

 

[Montalva]

and btw i can go 4300mhz with theese voltages and its stable but no perfromance gain at games and then the temps go higher and i like it cooler..

haha lol tryed to start whitout moding voltage and couldnt even boot to windows, if you play battle field you gain like 10fps on 4ghz

 

[Darkrix]

haha lol tryed to start whitout moding voltage and couldnt even boot to windows, if you play battle field you gain like 10fps on 4ghz

ok u have ORG cooler right. u need to upgrade it.. and if u have better cooler then do the next..
oc manual fsb 205 multiplier 19,5 cpu coltages 1.5 dram auto nb auto ht auto everything else auto exept the CPU voltages. and try to buut it up and what MB u have. i can chec some bios settings to u from internet..

 

[Darkrix]

now i will try something funny ill set the multiplier to 22 and let the MB auto oc the cpu.. lets see how far i can go..

 

[Montalva]

ok u have ORG cooler right. u need to upgrade it.. and if u have better cooler then do the next..
oc manual fsb 205 multiplier 19,5 cpu coltages 1.5 dram auto nb auto ht auto everything else auto exept the CPU voltages. and try to buut it up and what MB u have. i can chec some bios settings to u from internet..

i have a noctua nh-d14 and same motherborad as you have, running prime 95 whit offset voltage +0.1500

 

[Montalva]

so far all good, have been running now for 30min btw i have had a good 4ghz and NB 2700mhz oc but it apeard not to be as stable i tought it was

 

[Darkrix]

so far all good, have been running now for 30min btw i have had a good 4ghz and NB 2700mhz oc but it apeard not to be as stable i tought it was

why u are OC.ing the NB i use it as AUTO what does it help if u oc it to 2700mhz..

 

[Montalva]

it gives massive performance boost, if you oc the cpu/nb alone you can get 10%performance increase

 

[Darkrix]

it gives massive performance boost, if you oc the cpu/nb alone you can get 10%performance gains

ok so ill oc the nb then too going for fast boot in bios and then some 3dmark vantage and 2011 tests..