- Joined
- Oct 19, 2008
- Messages
- 3,162 (0.56/day)
System Name | White Theme |
---|---|
Processor | Intel 12700K CPU |
Motherboard | ASUS STRIX Z690-A D4 |
Cooling | Lian Li Galahad Uni w/ AL120 Fans |
Memory | 32GB DDR4-3200 Corsair Vengeance |
Video Card(s) | Gigabyte Aero 4080 Super 16GB |
Storage | 2TB Samsung 980 Pro PCIE 4.0 |
Display(s) | Alienware 38" 3840x1600 (165Hz) |
Case | Lian Li O11 Dynamic EVO White |
Audio Device(s) | 2i2 Scarlett Solo + Schiit Magni 3 AMP |
Power Supply | Corsair HX 1000 Platinum |
Has anyone done this mod to their antec 1200 yet?
http://www.overclock.net/case-mod-work-logs/441651-full-log-antec-1200-window-mod.html
I'm planning to do this as my first ever mod project, I've geeked it out to buy all the baddest parts I could get with my budget and now I need this mod to show em off.
I need tips on what tools I can use other than a jigsaw well any powertools since I only have a drill in my garage. I've already got sources for the U-Channel edge molding but not completely sure if it has adhesive in it and the aclyric im planning to use is 600x600mm can anyone give input on weather coloured acrylic works or looks as good(See through) as just the plain clear colour?
Are there alternate tools I can use for the incision? And is using a hacksaw to cut the steel gonna leave bad scratches around the edges?
I can get materials off www.gammods.com.au
http://www.overclock.net/case-mod-work-logs/441651-full-log-antec-1200-window-mod.html
I'm planning to do this as my first ever mod project, I've geeked it out to buy all the baddest parts I could get with my budget and now I need this mod to show em off.
I need tips on what tools I can use other than a jigsaw well any powertools since I only have a drill in my garage. I've already got sources for the U-Channel edge molding but not completely sure if it has adhesive in it and the aclyric im planning to use is 600x600mm can anyone give input on weather coloured acrylic works or looks as good(See through) as just the plain clear colour?
Are there alternate tools I can use for the incision? And is using a hacksaw to cut the steel gonna leave bad scratches around the edges?
I can get materials off www.gammods.com.au