-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
anyone have any luck flashing a 3060ti Eagle OC with a bios that has better fan speeds
- Thread starter pman
- Start date
- Joined
- Jan 5, 2006
- Messages
- 16,946 (2.59/day)
| System Name | AlderLake / Laptop |
|---|---|
| Processor | Intel i7 12700K P-Cores @ 5Ghz / Intel i3 7100U |
| Motherboard | Gigabyte Z690 Aorus Master / HP 83A3 (U3E1) |
| Cooling | Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans / Fan |
| Memory | 32GB DDR5 Corsair Dominator Platinum RGB 6000MHz CL36 / 8GB DDR4 HyperX CL13 |
| Video Card(s) | MSI RTX 2070 Super Gaming X Trio / Intel HD620 |
| Storage | Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2 / Samsung 256GB M.2 SSD |
| Display(s) | 23.8" Dell S2417DG 165Hz G-Sync 1440p / 14" 1080p IPS Glossy |
| Case | Be quiet! Silent Base 600 - Window / HP Pavilion |
| Audio Device(s) | Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533 |
| Power Supply | Seasonic Focus Plus Gold 750W / Powerbrick |
| Mouse | Logitech MX Anywhere 2 Laser wireless / Logitech M330 wireless |
| Keyboard | RAPOO E9270P Black 5GHz wireless / HP backlit |
| Software | Windows 11 / Windows 10 |
| Benchmark Scores | Cinebench R23 (Single Core) 1936 @ stock Cinebench R23 (Multi Core) 23006 @ stock |
Did you try to set a fan curve with afterburner?
it is unfortunately a problem with the voltage that the bios delivers to the fan motor - at 100% the fan only spins at 2080 rpm but is quite capable of spinning at over 3000 rpm given enough voltage which is controled by the bios on the graphics card... so my need is to increase the voltage that the bios delivers.... i guess i could build some 12V boost pack hack circuit that is fed by the board fan output that increases voltage based on a lookup table and delivers that to the motors so that the voltage for 100% that delivers 2080rpm is jacked up enough to deliver 3200rpm like a normal gpu fan hmm...
- Joined
- Mar 14, 2014
- Messages
- 1,161 (0.33/day)
| Processor | i7-4790K 4.6GHz @1.29v |
|---|---|
| Motherboard | ASUS Maximus Hero VII Z97 |
| Cooling | Noctua NH-U14S |
| Memory | G. Skill Trident X 2x8GB 2133MHz |
| Video Card(s) | Asus Tuf RTX 3060 V1 FHR (Newegg Shuffle) |
| Storage | OS 120GB Kingston V300, Samsung 850 Pro 512GB , 3TB Hitachi HDD, 2x5TB Toshiba X300, 500GB M.2 @ x2 |
| Display(s) | Lenovo y27g 1080p 144Hz |
| Case | Fractal Design Define R4 |
| Audio Device(s) | AKG Q701's w/ O2+ODAC (Sounds a little bright) |
| Power Supply | EVGA Supernova G2 850w |
| Mouse | Glorious Model D |
| Keyboard | Rosewill Full Size. Red Switches. Blue Leds. RK-9100xBRE - Hate this. way to big |
| Software | Win10 |
| Benchmark Scores | 3DMark FireStrike Score : needs updating |
Flash it back and get better case fans. It's a dual fan 60ti, it's going to run hot and be a poorly binned card. I suggest something high speed, noctua 3000rpms or something similar.
Open Air Case... i even tride aiming a desk fan at the card...can't make it's cooling fans speed up - stuck around 2100rpm... i think i'm gonna just deal with Gigabyte TS cause this is really ridiculous - the fans max out when the gpu is reading 62C and it just keeps climbing... it worked great when the ambient temps were 62-64F - it's just not working now with the ambient temps at 84F - no AC ... bad bios, down bios, all the way down, bad bad bios.... such a complete joke it is...
- Joined
- Jan 27, 2015
- Messages
- 1,065 (0.33/day)
| System Name | loon v4.0 |
|---|---|
| Processor | i7-11700K |
| Motherboard | asus Z590TUF+wifi |
| Cooling | Custom Loop |
| Memory | ballistix 3600 cl16 |
| Video Card(s) | eVga 3060 xc |
| Storage | WD sn570 1tb(nvme) SanDisk ultra 2tb(sata) |
| Display(s) | cheap 1080&4K 60hz |
| Case | Roswell Stryker |
| Power Supply | eVGA supernova 750 G6 |
| Mouse | eats cheese |
| Keyboard | warrior! |
| Benchmark Scores | https://www.3dmark.com/spy/21765182 https://www.3dmark.com/pr/1114767 |
check the bios database for 3060ti for gigglebyte. there are a few revions of eagle OC but check you have the latest - the fan thingy may be a reason
gpu-z will show what bios you have now - that will help.
good luck!
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Don't bother flashing the RTX 2000 or 3000 series cards, too many bricks.
You can't mod the bios of GTX 1000 or RTX cards at all. Same for Vega 56+.
The last cards that could have their bios modded was RX Polaris. The last cards to allow bios cross flash were RX RDNA1 or GTX 1000.
Use a oc tool to adjust fans
- Joined
- Mar 20, 2022
- Messages
- 213 (0.34/day)
| Processor | Ryzen 5 5600X |
|---|---|
| Motherboard | Asus B550-F Gaming WiFi |
| Cooling | Be Quiet! Dark Rock Pro 4 |
| Memory | 64GB G.Skill Ripjaws V 3600 CL18 |
| Video Card(s) | Gigabyte RX 6600 Eagle (de-shrouded) |
| Storage | Samsung 970 Evo 1TB M.2 |
| Display(s) | 2 x Asus 1080p 60Hz IPS |
| Case | Antec P101 Silent |
| Audio Device(s) | Ifi Zen DAC V2 |
| Power Supply | Be Quiet! Straight Power 11 650W Platinum |
| Mouse | JSCO JNL-101k |
| Keyboard | Akko 3108 V2 (Akko Pink linears) |
Is that GPU temperature or hotspot? Did you wait until the temperature plateaued or the card started thermal throttling? 62C isn't going to be your maximum value and so it doesn't really indicate how well the cooling solution is working. You mentioned ambient temperature but not what the card was maxing out at or if it was thermal throttling.
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Strangest thing is ive never had to screw with fan settings on any card I've owned.
- Joined
- Mar 14, 2014
- Messages
- 1,161 (0.33/day)
| Processor | i7-4790K 4.6GHz @1.29v |
|---|---|
| Motherboard | ASUS Maximus Hero VII Z97 |
| Cooling | Noctua NH-U14S |
| Memory | G. Skill Trident X 2x8GB 2133MHz |
| Video Card(s) | Asus Tuf RTX 3060 V1 FHR (Newegg Shuffle) |
| Storage | OS 120GB Kingston V300, Samsung 850 Pro 512GB , 3TB Hitachi HDD, 2x5TB Toshiba X300, 500GB M.2 @ x2 |
| Display(s) | Lenovo y27g 1080p 144Hz |
| Case | Fractal Design Define R4 |
| Audio Device(s) | AKG Q701's w/ O2+ODAC (Sounds a little bright) |
| Power Supply | EVGA Supernova G2 850w |
| Mouse | Glorious Model D |
| Keyboard | Rosewill Full Size. Red Switches. Blue Leds. RK-9100xBRE - Hate this. way to big |
| Software | Win10 |
| Benchmark Scores | 3DMark FireStrike Score : needs updating |
I have just because I didn't want them to get so warm in the first place. I didn't want them waiting to get warm until they kicked in.
I think the undervolting idea is a good one. If they do have performance to spare they could power limit it too. 84F ambient and no AC will be harder to cool no matter what.
- Joined
- Jan 8, 2017
- Messages
- 8,401 (3.33/day)
| System Name | Good enough |
|---|---|
| Processor | AMD Ryzen R9 7900 - Alphacool Eisblock XPX Aurora Edge |
| Motherboard | ASRock B650 Pro RS |
| Cooling | 2x 360mm NexXxoS ST30 X-Flow, 1x 360mm NexXxoS ST30, 1x 240mm NexXxoS ST30 |
| Memory | 32GB - FURY Beast RGB 5600 Mhz |
| Video Card(s) | Sapphire RX 7900 XT - Alphacool Eisblock Aurora |
| Storage | 1x Kingston KC3000 1TB 1x Kingston A2000 1TB, 1x Samsung 850 EVO 250GB , 1x Samsung 860 EVO 500GB |
| Display(s) | LG UltraGear 32GN650-B + 4K Samsung TV |
| Case | Phanteks NV7 |
| Power Supply | GPS-750C |
I highly doubt that's ever going to work, how do you even know that's the problem ? Are there other versions of this card with the exact kind of fans that spin faster ?
Are you even actually limited by temperature ?
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
I totally understand your view, i just never owned a card with fan stop.
People are too damn picky about fan noise. I'd like them to hear my 60mm delta fan
I use a box fan at night to keep the room from going dead silent (white noise) because I have tinnitus.
People are too damn picky about fan noise. I'd like them to hear my 60mm delta fan
I use a box fan at night to keep the room from going dead silent (white noise) because I have tinnitus.
- Joined
- Sep 16, 2018
- Messages
- 6,859 (3.60/day)
- Location
- Winnipeg, Canada
| System Name | Altered Beast |
|---|---|
| Processor | AMD R9 5900X, 5800X3D |
| Motherboard | Asus Crosshair VIII Dark Hero |
| Cooling | Thermalright Frost Commander 140, NF-A14 3K, T30 |
| Memory | 2x8 G.Skill Trident Z Royal 3200C14, 2x8GB G.Skill Trident Z Black and White 3200 C14 |
| Video Card(s) | Zotac 4070 Ti Trinity OC |
| Storage | WD SN850X 2TB, SN850 1TB, SN770 1TB - Asus Hyper M.2, SN770 1TB, SN750 500GB |
| Display(s) | LG 50UP7100 |
| Case | Fractal Torrent Compact RGB |
| Audio Device(s) | JBL 2.1 Deep Bass |
| Power Supply | EVGA SuperNova 750w G+, Monster HDP1800 |
| Mouse | Zowie EC2 Evo |
| Keyboard | Logitech G213 |
| Software | Yes |
| Benchmark Scores | Yes |
I agree 100%.
High performance and silence do not go hand in hand
Maybe in this case a little extra case flow can go a long way.
Or you could take the shroud and fans off and just use some case fans.
wow, hornets nest... it is just nuts... i put my Vega in and it's running 57C with 3300rpm just fine, but it's not GDDR6 mem either... it's the gpu temp, i forget what hotspot was, too hot...
look, i was just about to change out the fans when i found the guys post on youtube saying he was having the same problem mining with this card because of the slow fan speed and tried the paste thing, don't remember if he did pads too but hooey... i too have been sitting next to a SuperMicro X8dal-i in one of their hotswap cases for years but no longer.. just want a card that won't crash when it gets hot and we're not even to the hot part of summer yet... gonna call Gigabyte this afternoon after the market closes and give em a piece of burnin hot GPU love...
look, i was just about to change out the fans when i found the guys post on youtube saying he was having the same problem mining with this card because of the slow fan speed and tried the paste thing, don't remember if he did pads too but hooey... i too have been sitting next to a SuperMicro X8dal-i in one of their hotswap cases for years but no longer.. just want a card that won't crash when it gets hot and we're not even to the hot part of summer yet... gonna call Gigabyte this afternoon after the market closes and give em a piece of burnin hot GPU love...
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
i saw your post up there... that's why i'm callin home to see if they'll deal with their bad child... that last post was just venting... oh, while on this topic - you're saying the youtuber is just flat out lying huh?
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
For the amount of people coming here that have bricked their shiny new rtx 2000/3000 gpu and crying for help, because they trusted a youtuber, is not worth the risk. nvidia took the privilege away due to mining.
GTX 1000 and older can be cross flashed, GTX 1000-RTX 3000 can't be modded.
RX Polaris and older can be modded and cross flashed. RX Vega-RDNA1 can be cross flashed but not modded, RDNA2 there is not enough info or data to know.
GTX 1000 and older can be cross flashed, GTX 1000-RTX 3000 can't be modded.
RX Polaris and older can be modded and cross flashed. RX Vega-RDNA1 can be cross flashed but not modded, RDNA2 there is not enough info or data to know.
Last edited:
That's disappointing that Nvidia even removed the ability to cross-flash cards of the same type and gen. Cross-flashing (i.e. the Asus Strix XOC VBIOS) is really the only reason I've managed to put the squeeze on my MSI 1080ti Duke for all these years.
- Joined
- Mar 21, 2021
- Messages
- 4,024 (4.07/day)
- Location
- Colorado, U.S.A.
| System Name | HP Compaq 8000 Elite CMT |
|---|---|
| Processor | Intel Core 2 Quad Q9550 |
| Motherboard | Hewlett-Packard 3647h |
| Memory | 16GB DDR3 |
| Video Card(s) | Asus NVIDIA GeForce GT 1030 GDDR5 (fan-less) |
| Storage | 2TB Micron SATA SSD; 2TB Seagate Firecuda 3.5" HDD |
| Display(s) | Dell P2416D (2560 x 1440) |
| Power Supply | 12V HP proprietary |
| Software | Windows 10 Pro 64-bit |
Is there a way to put Noctua fans on these cards?
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
- Joined
- Mar 21, 2021
- Messages
- 4,024 (4.07/day)
- Location
- Colorado, U.S.A.
| System Name | HP Compaq 8000 Elite CMT |
|---|---|
| Processor | Intel Core 2 Quad Q9550 |
| Motherboard | Hewlett-Packard 3647h |
| Memory | 16GB DDR3 |
| Video Card(s) | Asus NVIDIA GeForce GT 1030 GDDR5 (fan-less) |
| Storage | 2TB Micron SATA SSD; 2TB Seagate Firecuda 3.5" HDD |
| Display(s) | Dell P2416D (2560 x 1440) |
| Power Supply | 12V HP proprietary |
| Software | Windows 10 Pro 64-bit |
Maybe someone will 3D print a replacement shroud.
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
Yeah proper measurements with a scale and caliper required
- Joined
- Mar 21, 2021
- Messages
- 4,024 (4.07/day)
- Location
- Colorado, U.S.A.
| System Name | HP Compaq 8000 Elite CMT |
|---|---|
| Processor | Intel Core 2 Quad Q9550 |
| Motherboard | Hewlett-Packard 3647h |
| Memory | 16GB DDR3 |
| Video Card(s) | Asus NVIDIA GeForce GT 1030 GDDR5 (fan-less) |
| Storage | 2TB Micron SATA SSD; 2TB Seagate Firecuda 3.5" HDD |
| Display(s) | Dell P2416D (2560 x 1440) |
| Power Supply | 12V HP proprietary |
| Software | Windows 10 Pro 64-bit |
Autodesk Fusion 360 has a version for personal use and one can send the file out for printing, so someone may do it.
eidairaman1
The Exiled Airman
- Joined
- Jul 2, 2007
- Messages
- 40,435 (6.74/day)
- Location
- Republic of Texas (True Patriot)
| System Name | PCGOD |
|---|---|
| Processor | AMD FX 8350@ 5.0GHz |
| Motherboard | Asus TUF 990FX Sabertooth R2 2901 Bios |
| Cooling | Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED |
| Memory | 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V) |
| Video Card(s) | AMD Radeon 290 Sapphire Vapor-X |
| Storage | Samsung 840 Pro 256GB, WD Velociraptor 1TB |
| Display(s) | NEC Multisync LCD 1700V (Display Port Adapter) |
| Case | AeroCool Xpredator Evil Blue Edition |
| Audio Device(s) | Creative Labs Sound Blaster ZxR |
| Power Supply | Seasonic 1250 XM2 Series (XP3) |
| Mouse | Roccat Kone XTD |
| Keyboard | Roccat Ryos MK Pro |
| Software | Windows 7 Pro 64 |
THE FAN SHOWDOWN on youtube