• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Artifacts, yay...

Joined
Mar 6, 2008
Messages
2,753 (0.47/day)
Location
Minnesota
Was planning on trading my old HD4850 to a friend. I put it in to make sure it works before I send it off. Everything was going fine. I started FurMark. A couple minutes in it decides to BSOD with pagefaultinblahblah. When it reboots artifacts galore. http://imageshack.us/g/641/1002020.jpg/ It didn't overheat, I know that for sure. Is this type of situation salvageable?
 
Last edited:
Joined
Jul 18, 2008
Messages
2,894 (0.50/day)
Location
South Carolina
System Name KILLER
Processor Intel Core i7 4790K
Motherboard MSI Z87 G45 Gaming
Cooling Water Cooling
Memory 2x8GB Gskill 2400mhz
Video Card(s) EVGA GTX 980
Storage SSD Samsung 500GB
Display(s) 24" Asus 144hz
Case Cooler Master HAF
Audio Device(s) X-Fi Platinum
Power Supply Antec 1200 Watt Modular
Software Windows 10 64 Bit
Benchmark Scores 3DMark Vantage 51342
Check the contacts and make sure theres no build up on them.
Also make sure your power cables are in all the way.
Make sure you have correct drivers for that card installed.
Other than that those pics dont look good.
 
Last edited:
Joined
Jan 12, 2010
Messages
1,526 (0.29/day)
System Name Custom Built
Processor AMD Ryzen 5 3600
Motherboard Asus PRIME A520M-A
Cooling Stock heatsink/fan
Memory 16GB 2x8GB Corsair Vengeance LPX 2400MHz
Video Card(s) MSI 1050Ti 4GB
Storage KINGSTON SNVS250G 256GB M.2 + 2 data disks
Display(s) Dell S2421NX
Case Aerocool CS103
Audio Device(s) Realtek
Power Supply Seasonic M12II-520 EVO
Mouse Logitech MX Master 2S
Keyboard Logitech
Software Windows 11 Pro 64-bit
That sounds like bad video memory :( artifacts in POST and BIOS are ALWAYS bad sign!.
 

ctrain

New Member
Joined
Jan 12, 2010
Messages
393 (0.08/day)
it's likely fucked if you're getting artifacts before you're even in windows.
 
Joined
Mar 18, 2008
Messages
5,400 (0.92/day)
Location
Australia
System Name Night Rider | Mini LAN PC | Workhorse
Processor AMD R7 5800X3D | Ryzen 1600X | i7 970
Motherboard MSi AM4 Pro Carbon | GA- | Gigabyte EX58-UD5
Cooling Noctua U9S Twin Fan| Stock Cooler, Copper Core)| Big shairkan B
Memory 2x8GB DDR4 G.Skill Ripjaws 3600MHz| 2x8GB Corsair 3000 | 6x2GB DDR3 1300 Corsair
Video Card(s) MSI AMD 6750XT | 6500XT | MSI RX 580 8GB
Storage 1TB WD Black NVME / 250GB SSD /2TB WD Black | 500GB SSD WD, 2x1TB, 1x750 | WD 500 SSD/Seagate 320
Display(s) LG 27" 1440P| Samsung 20" S20C300L/DELL 15" | 22" DELL/19"DELL
Case LIAN LI PC-18 | Mini ATX Case (custom) | Atrix C4 9001
Audio Device(s) Onboard | Onbaord | Onboard
Power Supply Silverstone 850 | Silverstone Mini 450W | Corsair CX-750
Mouse Coolermaster Pro | Rapoo V900 | Gigabyte 6850X
Keyboard MAX Keyboard Nighthawk X8 | Creative Fatal1ty eluminx | Some POS Logitech
Software Windows 10 Pro 64 | Windows 10 Pro 64 | Windows 7 Pro 64/Windows 10 Home
Same as a 4870 i have here, exact same issue. Its a solder problem. I got a heatgun, ran it over the card for 10mins, problem disappeared.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.19/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Should I bake it then?

sounds like you should to me, at this point the card might as well be dead. nothing to lose.
 
Joined
Jan 12, 2010
Messages
1,526 (0.29/day)
System Name Custom Built
Processor AMD Ryzen 5 3600
Motherboard Asus PRIME A520M-A
Cooling Stock heatsink/fan
Memory 16GB 2x8GB Corsair Vengeance LPX 2400MHz
Video Card(s) MSI 1050Ti 4GB
Storage KINGSTON SNVS250G 256GB M.2 + 2 data disks
Display(s) Dell S2421NX
Case Aerocool CS103
Audio Device(s) Realtek
Power Supply Seasonic M12II-520 EVO
Mouse Logitech MX Master 2S
Keyboard Logitech
Software Windows 11 Pro 64-bit
I have read that baking is a TEMPORARY solution and the problem will came back sooner or later but right, you have nothing to lose (well, maybe the oven with toxic fumes, I would rather choose the heatgun though).

Though I still think that is a VRAM issue.
 
Joined
Jul 15, 2009
Messages
1,087 (0.20/day)
Location
Upstate NewYork
System Name no remorse
Processor i7 2600k @ 4.7 ht on
Motherboard gigabyte z68x-ud3p-b3
Cooling xspc rasa cpu block, bitspower restop, mcp355
Memory 4 x 4gb corsair vengance 1600 8-8-8-24
Video Card(s) 570 gtx
Storage 2x32 gb patriot ssd's in raid 0 (os & games) / 2 x 500gb barracuda (storage)
Display(s) 25 inch 1080p widescreen i-inc
Case cooler master haf x
Audio Device(s) turtle beach earforce px21 headset (usb)
Power Supply corsair HX850
Benchmark Scores super pi 1m : 7.160 sec. 34,837 3dmark06
i had a couple 280's that died on me like that with similiar artifacts, a slight underclock fixed it, corrupted memory was the culprit. if u can flash it with lower clock speeds, might be salvagable. Infact i just gave away those 2 280's just yesterday to a friend of mine who want to try messing with them to save them.
 

fullinfusion

Vanguard Beta Tester
Joined
Jan 11, 2008
Messages
9,909 (1.67/day)
Im leaning towards the gpu memory is pooched. Baking it wont do a thing but waste your time.
Baking is if solder joints have come loose on the board but hey one never knows :cool:
 
Joined
Feb 12, 2006
Messages
2,318 (0.35/day)
System Name MONEY PIT
Processor i7-3770K @ 4800 1.20v batch #3231B415 Delided
Motherboard ASrock Z77 OC Formula w onboard waterblocks
Cooling Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory G,skill Trident X F3-2400C10D-16GTX
Video Card(s) EVGA GTX 980 Ti Classified with EK nickel/acetal waterblock installed
Storage 2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
Display(s) 3/ Samsung2343bwx + 65in LG 4K
Case NZXT Phantom White w/red
Audio Device(s) ReCon3d fatal1ty pro, Logitech z906 THX
Power Supply corsair AX860i
Mouse Rat7
Software 64bit ++++ win 10
bake it ...have a 8800 I use for physics had same prob baked it over a year ago still works
 
Joined
Nov 15, 2005
Messages
1,007 (0.15/day)
Processor 2500K @ 4.5GHz 1.28V
Motherboard ASUS P8P67 Deluxe
Cooling Corsair A70
Memory 8GB (2x4GB) Corsair Vengeance 1600 9-9-9-24 1T
Video Card(s) eVGA GTX 470
Storage Crucial m4 128GB + Seagate RAID 1 (1TB x 2)
Display(s) Dell 22" 1680x1050 nothing special
Case Antec 300
Audio Device(s) Onboard
Power Supply PC Power & Cooling 750W
Software Windows 7 64bit Pro
+1 to baking it, I've resurrected a few cards with the oven. I even had an 8800GTX given to me from a co-worker that also had artifacts on the POST screen that was cured and converted to folding@home use 24/7 afterwards.
 
Joined
Mar 6, 2008
Messages
2,753 (0.47/day)
Location
Minnesota
Can someone direct me to a good baking guide?
 
Joined
Mar 18, 2008
Messages
5,400 (0.92/day)
Location
Australia
System Name Night Rider | Mini LAN PC | Workhorse
Processor AMD R7 5800X3D | Ryzen 1600X | i7 970
Motherboard MSi AM4 Pro Carbon | GA- | Gigabyte EX58-UD5
Cooling Noctua U9S Twin Fan| Stock Cooler, Copper Core)| Big shairkan B
Memory 2x8GB DDR4 G.Skill Ripjaws 3600MHz| 2x8GB Corsair 3000 | 6x2GB DDR3 1300 Corsair
Video Card(s) MSI AMD 6750XT | 6500XT | MSI RX 580 8GB
Storage 1TB WD Black NVME / 250GB SSD /2TB WD Black | 500GB SSD WD, 2x1TB, 1x750 | WD 500 SSD/Seagate 320
Display(s) LG 27" 1440P| Samsung 20" S20C300L/DELL 15" | 22" DELL/19"DELL
Case LIAN LI PC-18 | Mini ATX Case (custom) | Atrix C4 9001
Audio Device(s) Onboard | Onbaord | Onboard
Power Supply Silverstone 850 | Silverstone Mini 450W | Corsair CX-750
Mouse Coolermaster Pro | Rapoo V900 | Gigabyte 6850X
Keyboard MAX Keyboard Nighthawk X8 | Creative Fatal1ty eluminx | Some POS Logitech
Software Windows 10 Pro 64 | Windows 10 Pro 64 | Windows 7 Pro 64/Windows 10 Home
I will if i get time later ill post a few pic's of what my card is doing, and then ill post a pic after i have put the heat gun to it. Ive yet to realy heat up the card (200c) to start to melt the solder and see if the card is then fixed for good, at the moment all i have done is heat it up to 100c for 10mins, put it back into the comp and it worked fine for the rest of the day. But went back to the same artifacting crap the next morning.

Ill keep you posted.
 
Joined
Feb 12, 2006
Messages
2,318 (0.35/day)
System Name MONEY PIT
Processor i7-3770K @ 4800 1.20v batch #3231B415 Delided
Motherboard ASrock Z77 OC Formula w onboard waterblocks
Cooling Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory G,skill Trident X F3-2400C10D-16GTX
Video Card(s) EVGA GTX 980 Ti Classified with EK nickel/acetal waterblock installed
Storage 2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
Display(s) 3/ Samsung2343bwx + 65in LG 4K
Case NZXT Phantom White w/red
Audio Device(s) ReCon3d fatal1ty pro, Logitech z906 THX
Power Supply corsair AX860i
Mouse Rat7
Software 64bit ++++ win 10
Joined
Jul 15, 2009
Messages
1,087 (0.20/day)
Location
Upstate NewYork
System Name no remorse
Processor i7 2600k @ 4.7 ht on
Motherboard gigabyte z68x-ud3p-b3
Cooling xspc rasa cpu block, bitspower restop, mcp355
Memory 4 x 4gb corsair vengance 1600 8-8-8-24
Video Card(s) 570 gtx
Storage 2x32 gb patriot ssd's in raid 0 (os & games) / 2 x 500gb barracuda (storage)
Display(s) 25 inch 1080p widescreen i-inc
Case cooler master haf x
Audio Device(s) turtle beach earforce px21 headset (usb)
Power Supply corsair HX850
Benchmark Scores super pi 1m : 7.160 sec. 34,837 3dmark06
nice link, bookmarked it thanks. someone should quote his post and sticky it here, given the proper credits of course.
 
Joined
Mar 18, 2008
Messages
5,400 (0.92/day)
Location
Australia
System Name Night Rider | Mini LAN PC | Workhorse
Processor AMD R7 5800X3D | Ryzen 1600X | i7 970
Motherboard MSi AM4 Pro Carbon | GA- | Gigabyte EX58-UD5
Cooling Noctua U9S Twin Fan| Stock Cooler, Copper Core)| Big shairkan B
Memory 2x8GB DDR4 G.Skill Ripjaws 3600MHz| 2x8GB Corsair 3000 | 6x2GB DDR3 1300 Corsair
Video Card(s) MSI AMD 6750XT | 6500XT | MSI RX 580 8GB
Storage 1TB WD Black NVME / 250GB SSD /2TB WD Black | 500GB SSD WD, 2x1TB, 1x750 | WD 500 SSD/Seagate 320
Display(s) LG 27" 1440P| Samsung 20" S20C300L/DELL 15" | 22" DELL/19"DELL
Case LIAN LI PC-18 | Mini ATX Case (custom) | Atrix C4 9001
Audio Device(s) Onboard | Onbaord | Onboard
Power Supply Silverstone 850 | Silverstone Mini 450W | Corsair CX-750
Mouse Coolermaster Pro | Rapoo V900 | Gigabyte 6850X
Keyboard MAX Keyboard Nighthawk X8 | Creative Fatal1ty eluminx | Some POS Logitech
Software Windows 10 Pro 64 | Windows 10 Pro 64 | Windows 7 Pro 64/Windows 10 Home
Ok sorry for taking so long, but i have here some before and after pictures to prove that its a solder problem and baking the card should fix it.

I have here pictures of my card before i hit it with a heat gun and then after i hit it with the heat gun.

As you can see there is a big difference and just after 10mins of heating up the card i could then fully load into windows and install divers, before that it would refuse to load windows period.



Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us
 
Joined
Mar 6, 2008
Messages
2,753 (0.47/day)
Location
Minnesota
Thanks everyone. I'll get around to baking it one of these days.
 

qubit

Overclocked quantum bit
Joined
Dec 6, 2007
Messages
17,865 (2.99/day)
Location
Quantum Well UK
System Name Quantumville™
Processor Intel Core i7-2700K @ 4GHz
Motherboard Asus P8Z68-V PRO/GEN3
Cooling Noctua NH-D14
Memory 16GB (2 x 8GB Corsair Vengeance Black DDR3 PC3-12800 C9 1600MHz)
Video Card(s) MSI RTX 2080 SUPER Gaming X Trio
Storage Samsung 850 Pro 256GB | WD Black 4TB | WD Blue 6TB
Display(s) ASUS ROG Strix XG27UQR (4K, 144Hz, G-SYNC compatible) | Asus MG28UQ (4K, 60Hz, FreeSync compatible)
Case Cooler Master HAF 922
Audio Device(s) Creative Sound Blaster X-Fi Fatal1ty PCIe
Power Supply Corsair AX1600i
Mouse Microsoft Intellimouse Pro - Black Shadow
Keyboard Yes
Software Windows 10 Pro 64-bit
Those artefact pictures remind me of a card like this just the other day.

I've loaned my friend a very old AGP system (Abit AN7 mobo and AMD XP3200+ CPU) for basic internet access, where my GeForce 4200Ti graphics card died.* I put in a replacement GeForce 7600 and that bugger didn't work either. It was fine a while back, but now boots into the BIOS just fine, then artefacts with vertical bars and all sorts of strange shit when it hits windows. :mad: It's not sensitive to flexing, either.

Had to fix the problem by buying a new GF6200 512MB AGP for £40 (a choice of one card only). Silly money to throw away on this old system. :ohwell:

*Stay tuned, rant thread coming soon! :laugh:

EDIT: his money, not mine!
 
Last edited:
Joined
Jan 12, 2010
Messages
1,526 (0.29/day)
System Name Custom Built
Processor AMD Ryzen 5 3600
Motherboard Asus PRIME A520M-A
Cooling Stock heatsink/fan
Memory 16GB 2x8GB Corsair Vengeance LPX 2400MHz
Video Card(s) MSI 1050Ti 4GB
Storage KINGSTON SNVS250G 256GB M.2 + 2 data disks
Display(s) Dell S2421NX
Case Aerocool CS103
Audio Device(s) Realtek
Power Supply Seasonic M12II-520 EVO
Mouse Logitech MX Master 2S
Keyboard Logitech
Software Windows 11 Pro 64-bit
IMHO and what I've read on net, the baking procedure is a temporal fix, the only way to fix it "properly" is a reballing equipment like some companies do with those Nvidia defective chips on laptops.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.19/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
IMHO and what I've read on net, the baking procedure is a temporal fix, the only way to fix it "properly" is a reballing equipment.

'temporary' could be 6 months. thats another 6 months to find a replacement.
 
Joined
Jan 12, 2010
Messages
1,526 (0.29/day)
System Name Custom Built
Processor AMD Ryzen 5 3600
Motherboard Asus PRIME A520M-A
Cooling Stock heatsink/fan
Memory 16GB 2x8GB Corsair Vengeance LPX 2400MHz
Video Card(s) MSI 1050Ti 4GB
Storage KINGSTON SNVS250G 256GB M.2 + 2 data disks
Display(s) Dell S2421NX
Case Aerocool CS103
Audio Device(s) Realtek
Power Supply Seasonic M12II-520 EVO
Mouse Logitech MX Master 2S
Keyboard Logitech
Software Windows 11 Pro 64-bit
Top