Cool Mike
New Member
- Joined
- Apr 22, 2009
- Messages
- 206 (0.04/day)
- Location
- South Carolina, USA
System Name | Cool Mike |
---|---|
Processor | Intel I7 3930K @ 4.8Ghz |
Motherboard | Asus X79 Rampage Extreme IV |
Cooling | Thermaltake Water 2.0 |
Memory | Corsair Dom. Platinum 4X4GB 2400Mhz 9-11-11-31 |
Video Card(s) | Powercolor 7990 Devil 13 |
Storage | OCZ RevoDrive3 x2 960GB |
Display(s) | Asus 25" 1080P LED |
Case | NZXT Switch 810 - Full Tower |
Audio Device(s) | Asus - On-board (Realtek) |
Power Supply | OCZ Fatality 1000W Gold - Individually Sleeved Cables |
Software | Windows 7 ULT 64Bit |
Hello everyone, Thought I would reach out. I am on my second ASrock Z68 Extreme 7 Gen 3 with the same issue. Called asrock they told me to return it after spending some time debugging with them on the phone. Now the second mother board has the same problem. Problem: In the UDFI Bios I cannot manually change a numeric value. Example, when changing the multiplier it will only take the number 5 or sometimes 16. If I enter number 1 then number 5 appears. All pull down menus work fine. Example when I enter in a user profile to save, only letters will enter properly. If I enter a number the shift value will display, example if you enter the number 2 the # character will display. I have tried 3 different keyboards with the same result. System will boot into win7 fine, but I need bios control.
Seems like a Bios or batch problem. Anyone have this issue? what am I missing?
No newbie here.
Seems like a Bios or batch problem. Anyone have this issue? what am I missing?
No newbie here.