- Joined
- Oct 18, 2010
- Messages
- 183 (0.04/day)
- Location
- Walsall
Processor | Intel Q6600 3.2 ghz (356 * 9) |
---|---|
Motherboard | ASUS P5B Deluxe WIFI/AP |
Cooling | Corsair h60 with extra fan (push/pull) |
Memory | 6gb DDR2-800mhz (Kingston Blue Hyper X 2x2GB) (Kingston Ram 2x1gb) @ 5-6-6-18 |
Video Card(s) | Nvidia Gtx 280 XFX |
Storage | 2 x Crucial c300 64gb ssd (raid 0) | 2 x Wd 320gb (raid 0) |
Display(s) | 2 x 23" AOC e2343f led monitors |
Case | Coolermaster Elite 430 |
Power Supply | Powercool 750w Modular PSU |
Software | Windows 7 Ultimate 64bit |
I've got an issue with my system, not sure if this should be in here or overclocking thread because its a bit of both.
I've been using my board to overclock my Q6600 to 2.8ghz, and i've been having temp issues, i've got the temp stable now, but I posted another thread and people said my cooler probably wasn't on tight enough, I tightened it, reset my bios to defaults and then it wouldn't let me overclock my processor. 4 resets of the bios and 1 clear of the bios later, it still wouldn't work. In frustration I left it alone for 10 mins came back, re put in the settings and it worked fine, and has been stable ever since!
I'm just concerned that something might be going wrong somewhere? Any ideas or opinions would be greatly appreciated.
I've been using my board to overclock my Q6600 to 2.8ghz, and i've been having temp issues, i've got the temp stable now, but I posted another thread and people said my cooler probably wasn't on tight enough, I tightened it, reset my bios to defaults and then it wouldn't let me overclock my processor. 4 resets of the bios and 1 clear of the bios later, it still wouldn't work. In frustration I left it alone for 10 mins came back, re put in the settings and it worked fine, and has been stable ever since!
I'm just concerned that something might be going wrong somewhere? Any ideas or opinions would be greatly appreciated.