• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Asus P8P67-M OC on 2600k Question

lyndonguitar

I play games
Joined
Apr 1, 2010
Messages
1,878 (0.37/day)
Location
Philippines
System Name X6 | Lyndon-ROG
Processor Intel Core i7-8700k | Intel Core i7 6700HQ
Motherboard Gigabyte Z370 Aorus Gaming 5 | Asus ROG-GL552VX
Cooling Deepcool Captain 240EX
Memory 16GB Corsair Vengeance LED | 8 GB
Video Card(s) NVIDIA GTX 1080 8 GB GDDR5X | NVIDIA GeForce GTX 950M 4GB
Storage SSDs: 500GB, HDDs: 2TB, 2TB, 3TB | SSD: 250GB, HDD: 1TB
Display(s) Samsung 49" CHG90 3840x1080@144Hz, Panasonic 32" HDTV, | 15.6"1080p
Case Cougar Panzer Max
Audio Device(s) HyperX Cloud II | Corsair Gaming H1500 7.1 | ROCCAT Kave 5.1 | Edifier M3200
Power Supply EVGA 750GQ
Mouse Logitech G403 | Razer Deathadder Chroma | Logitech G302 | Mad Catz Cyborg R.A.T. 5
Keyboard Corsair Vengeance K70 Cherry MX Red
Software Windows 10
Hi guys I am planning on buying this Motherboard: Asus P8P67-M

along with this CPU: Intel Core i7 2600K Unlocked 3.4GHz
and this RAM: G.Skill RipJaws 4gb (dual) ddr3 1600 (F3 12800CL9D 4GBRL)

and I am planning on overclocking(i have a Corsair h50 or will buy another corsair hxx)

can you tell me what (theoretically) speeds can I reach max?

I knew once upon a time about all these Frequencies, CL, FSB speed, Voltage, etc, etc. by research and have since forgot it. due to long time of not thinkering with computers.

All I know now is some type of RAM is different than others when it comes to overclocking so what RAM would you recommend me to reach higher speeds? is that RAM bad for OC'ing?

I plan to reach at least 4Ghz is that possible with this?

Im a little tight on budget here so please help me make right choices
 
Joined
Oct 30, 2009
Messages
1,364 (0.26/day)
Location
TX
System Name Beast
Processor Core i7 10700K 4.5GHZ 24/7
Motherboard MSI MPG Z490 Gaming Plus
Cooling Master Liquid 240
Memory 32 gigs DDR4 3600Mhz Gskill RipJaws
Video Card(s) AMD Raedon 5700XT
Storage 1TB Samsung NVME, Western Digital 4TB storage
Display(s) Dell UltraSharp 34" HD
Case Cooler Master HAF XB EVO
Audio Device(s) onboard
Power Supply EVGA 1000 Watt full modular
Software Win10 ENT 64Bit
4.0ghz is highly possible. I have the same board running a 2500k and it's @ 4.5ghz with a slight volt increase.
 

lyndonguitar

I play games
Joined
Apr 1, 2010
Messages
1,878 (0.37/day)
Location
Philippines
System Name X6 | Lyndon-ROG
Processor Intel Core i7-8700k | Intel Core i7 6700HQ
Motherboard Gigabyte Z370 Aorus Gaming 5 | Asus ROG-GL552VX
Cooling Deepcool Captain 240EX
Memory 16GB Corsair Vengeance LED | 8 GB
Video Card(s) NVIDIA GTX 1080 8 GB GDDR5X | NVIDIA GeForce GTX 950M 4GB
Storage SSDs: 500GB, HDDs: 2TB, 2TB, 3TB | SSD: 250GB, HDD: 1TB
Display(s) Samsung 49" CHG90 3840x1080@144Hz, Panasonic 32" HDTV, | 15.6"1080p
Case Cougar Panzer Max
Audio Device(s) HyperX Cloud II | Corsair Gaming H1500 7.1 | ROCCAT Kave 5.1 | Edifier M3200
Power Supply EVGA 750GQ
Mouse Logitech G403 | Razer Deathadder Chroma | Logitech G302 | Mad Catz Cyborg R.A.T. 5
Keyboard Corsair Vengeance K70 Cherry MX Red
Software Windows 10
4.0ghz is highly possible. I have the same board running a 2500k and it's @ 4.5ghz with a slight volt increase.

what about ram type, the frequencies and CAS latency??? would it matter?

what cooler do you use?
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.62/day)
ram speed isn't too important for CPU speed clocking. Only BIOS wil laffect ram clocking with some modules, and that depends on what board you get. You'll get about 16k read, 18k write @ 1600 MHz, and 23k read, 24k write @ 2133 @ 9-10-9. Only benchmarks seem to be affected...daily usage with 1600 MHz 9-9-9-24 is just fine.

H70 is more than enough for 4.5GHz, IMHO. Most chips will do this @ less than 125w pulled through VRM, and most aftermarket coolers are good for like 150w-250w....

I run 4.6GHz now, on H70, with the H70's fans running the included low-speed adapters. LinX/IBT will give me 85c load temps, normal gaming and such i don't break 70c. This is the same for both of my CPUs.

2500K, I have heard a fwe peopel stuck @ just 4.4GHz. Crazyeyes was the first I heard, but another local friend has a similar chip that he just got.

Most chips can be maxed out on air. there's a hard limit where the next multi jsut doesn't work, and the last working multi is generally had to get fully stable. Overclocking these chips to the max is so easy it's scary.
 
Joined
Oct 30, 2009
Messages
1,364 (0.26/day)
Location
TX
System Name Beast
Processor Core i7 10700K 4.5GHZ 24/7
Motherboard MSI MPG Z490 Gaming Plus
Cooling Master Liquid 240
Memory 32 gigs DDR4 3600Mhz Gskill RipJaws
Video Card(s) AMD Raedon 5700XT
Storage 1TB Samsung NVME, Western Digital 4TB storage
Display(s) Dell UltraSharp 34" HD
Case Cooler Master HAF XB EVO
Audio Device(s) onboard
Power Supply EVGA 1000 Watt full modular
Software Win10 ENT 64Bit
I have the same memory as you got.
I'm using an corsair H80 with mine and it folds 24/7 temps stay in the mid to high 40's C.
 
Joined
Mar 8, 2009
Messages
1,077 (0.20/day)
System Name Primary Rig
Processor e8500 Q822A549 4.5ghz AIR
Motherboard Foxconn Mars P35
Cooling TRUE
Memory 2 x2GB Patriot Viper 1066 5-5-5-12 @ 1.8v
Video Card(s) Sapphire 5870 Unlocked
Storage 300gb Velociraptor
Display(s) Dell 24" Ultrasharp
Case Coolermaster CM690
Power Supply PC Power & Cooling 750w Quad Silencer
Software Windows 7 Ultimate x86
Plan on 4.6ghz plus or minus 0.2ghz.
 

uwemi

New Member
Joined
Oct 12, 2011
Messages
4 (0.00/day)
Helo i'm new here...
I just want to ask one question.
How much can i overclock my i7 2600K on gigabyte - Z68XP-UD3
For cooling I use a Thermal take FrioOCK
 
Joined
Mar 8, 2009
Messages
1,077 (0.20/day)
System Name Primary Rig
Processor e8500 Q822A549 4.5ghz AIR
Motherboard Foxconn Mars P35
Cooling TRUE
Memory 2 x2GB Patriot Viper 1066 5-5-5-12 @ 1.8v
Video Card(s) Sapphire 5870 Unlocked
Storage 300gb Velociraptor
Display(s) Dell 24" Ultrasharp
Case Coolermaster CM690
Power Supply PC Power & Cooling 750w Quad Silencer
Software Windows 7 Ultimate x86
same answer as above ;)
 
Top