asus rog strix rx570 code 43 error

[Vapour2021]

Hi,
i've just brought a second hand graphic card and it gets error code 43,

i've tried this bios first

Asus RX 570 VBIOS​

4 GB GDDR5, 1300 MHz GPU, 1750 MHz Memory

www.techpowerup.com

then this version https://www.techpowerup.com/vgabios/?manufacturer=Asus&model=RX+570

i've tried the atikmdag that didnt work,

I'm using windows 10 21H1 ryzen 9 3700x

PSU is 500w

i've tried the unverified versions also none works,

will i have to send the graphic card away to repair.

i've just tried this version via command prompt still not updating

 

[Vapour2021]

can anyone help been trying to fix this last 24hrs with different bios doing my nut in lol

any help?

 

[Vapour2021]

anyone help me please

 

[atifsh]

first ddu your drivers
than force flash bios..(dual elpida/hynix) one and see if that works.

 

[Vapour2021]

Ok I've just done a whole clean windows 10, enabled my integrated graphic card use that while I flash bios, so before I flashed I rebooted back to safe mode ddu, went back to normal win 10, flashed the bios see below. https://www.techpowerup.com/vgabios/191598/asus-rx570-4096-170327
there only this one. I tried the other strix to but that didn't work, but it worked the flash no more code 47 - rebooted pc - enabled pcie plugged in hdmi and the code 47 was back.... either the chips are buggered get them replaced.

 

[Caring1]

Why do you keep trying to flash the OC version when your card isn't one?
Try this Bios:

Asus RX 570 VBIOS

4 GB GDDR5, 1244 MHz GPU, 1750 MHz Memory

www.techpowerup.com

 

[Vapour2021]

Why do you keep trying to flash the OC version when your card isn't one?
Try this Bios:

Asus RX 570 VBIOS

4 GB GDDR5, 1244 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Like I've said before I've tried all 4 4gb 570 none of them are working.

 

[Caring1]

Like I've said before I've tried all 4 4gb 570 none of them are working.

Yes I can read.
Did you try the Vbios I linked?

 

[Vapour2021]

Yes I can read.
Did you try the Vbios I linked?

Yes I did I posted the screen shot of the error

 

[atifsh]

Yes I did I posted the screen shot of the error

i think, i told you to force flash.

while being in cmd [command prompt]
atiflash -f -p 0 bios [fix the names]

 

[Vapour2021]

i think, i told you to force flash.

how do you force flash?

 

[atifsh]

how do you force flash?

already told you.....‍

command prompt
atiflash -p -f 0 bios.rom

replace the names accordingly.
example amdvbwinflash or atiflashwin..etc.

 

[Vapour2021]

already told you.....‍

command prompt
atiflash -p -f 0 bios.rom

replace the names accordingly.
example amdvbwinflash or atiflashwin..etc.

tried you're method still don't work, weird thing is.. on integrated graphics card and flashing the file code 43 goes, but when you go to bios and enable pcie and swap back to graphic card it stops working again code 43 error.

 

[atifsh]

tried you're method still don't work, weird thing is.. on integrated graphics card and flashing the file code 43 goes, but when you go to bios and enable pcie and swap back to graphic card it stops working again code 43 error.

ddu your drivers again. install new whql drivers.
download this and run.. see if this solve the issue
atikmdag-bios

 

[Vapour2021]

ddu your drivers again. install new whql drivers.
download this and run.. see if this solve the issue
atikmdag-bios

1: ddu drivers then I installed the new whql drivers from this link https://www.techpowerup.com/download/amd-radeon-graphics-drivers/
2: used your bios.exe rebooted.
still code 43.

I've looked inside the graphic card and it's a Elpida ram - https://www.techpowerup.com/vgabios/214805/214805 I flashed this after I ddu the drivers and then installed whql and your bios still don't work,

I think it's complete messed up ill have to get someone professional to look at it.