Hi guys,
I need help with an issue that i encountered when i changed my video card to a Palit GTX 560 Ti earlier this month.
I noticed that when playing SC2, the settings defaulted to MEDIUM though i'm sure that it should be at ULTRA. I checked GPU-Z to check whether the clocks on the gpu are on spec and i noticed that the PCI-E x16 slot is running at X4. CPU-Z and Aida also reports that the slot is running at X4.
The card is installed in the slot nearest to the processor. I could prolly install the card in the X8 slot but it would be at close proximity to the PSU and might overheat the card.
I already tried reseating the gpu and cleaning the pci-e slots using contact cleaner to no avail.
Any other insights?
My specs are as follows:
Processor: Intel I5 2400
Motherboard: Asus Sabertooth P67
RAM: Corsair Dominator 1600MHz CL9
HDD: Seagate 2Tb LP
GPU: Palit GTX 560ti 1Gb DDR5
PSU: XFX 750w Black Edition
I need help with an issue that i encountered when i changed my video card to a Palit GTX 560 Ti earlier this month.
I noticed that when playing SC2, the settings defaulted to MEDIUM though i'm sure that it should be at ULTRA. I checked GPU-Z to check whether the clocks on the gpu are on spec and i noticed that the PCI-E x16 slot is running at X4. CPU-Z and Aida also reports that the slot is running at X4.
The card is installed in the slot nearest to the processor. I could prolly install the card in the X8 slot but it would be at close proximity to the PSU and might overheat the card.
I already tried reseating the gpu and cleaning the pci-e slots using contact cleaner to no avail.
Any other insights?
My specs are as follows:
Processor: Intel I5 2400
Motherboard: Asus Sabertooth P67
RAM: Corsair Dominator 1600MHz CL9
HDD: Seagate 2Tb LP
GPU: Palit GTX 560ti 1Gb DDR5
PSU: XFX 750w Black Edition