-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
ATITool 0.0.21 released!
- Thread starter W1zzard
- Start date
let's post something positive for change: 0.0.21 works perfectly on my sys, no bugs at all, every 3d app incl. doom3, farcry and so on is recognized. the possibility to send the temperature readings to mbm is ingenious and spares me a lot of juggling with vb scripts in samurize. although i don't actually need the fan control (9800xt has a built in) it works 100%.
so what else can i say than a big thanks to w1zzard, very good job!!
so what else can i say than a big thanks to w1zzard, very good job!!
munz778
New Member
- Joined
- Aug 23, 2004
- Messages
- 28 (0.00/day)
| Processor | Socket 478 Pentium 4 Prescott 3.2GHz @ 4.214GHz (1.6v) w/ 1MB L2 Cache |
|---|---|
| Motherboard | Asus P4C800-E Deluxe Rev 2.00 |
| Cooling | Cooler Master Hyper-6 CPU Cooler w/1x80mm, Swiftech MCX159-R Chipset Cooler w/1x40mm, 1x60mm for RAM |
| Memory | 2x1024MB OCZ PC4000 DDR Platinum Edition w/ Heatspreaders @ 263.3MHz (DDR527@2.8v) 3-3-2-8 |
| Video Card(s) | PowerColor X1950 Pro AGP 512MB DDR3 w/ Arctic Cooling Accelero X2 (Stock) |
| Storage | 2x320GB Seagate Barracuda 7200.10 in RAID-0 (ICH5R) & 1x500GB Seagate Barracuda 7200.10 |
| Display(s) | Gateway 2000 19" 1600x1200 CRT (1998) |
| Case | Cooler Master Praetorian 731 w/ 2x80mm front, 1x80mm top & 1x120mm side intake, 2x80mm rear exhaust |
| Audio Device(s) | Sound Blaster Audigy 2 ZS |
| Power Supply | OCZ Powerstream 520 |
| Software | Windows Vista Ultimate |
MikeS3000 said:
i would also like to hear what people have to say about this...personally i'm hesitant to keep the fan at 100% as i'm worried that it may reduce the fan's longevity and result in a premature fan failure.
i'm tempted to change the preset fan speeds, for example 80C=80% instead of 80C=55%...i'd want more info on the robustness of the fan proir to proceeding.
- Joined
- May 14, 2004
- Messages
- 27,049 (3.71/day)
| Processor | Ryzen 7 5700X |
|---|---|
| Memory | 48 GB |
| Video Card(s) | RTX 4080 |
| Storage | 2x HDD RAID 1, 3x M.2 NVMe |
| Display(s) | 30" 2560x1600 + 19" 1280x1024 |
| Software | Windows 10 64-bit |
video card fans have been runing at 100% for years ... i wouldnt worry about it
munz778
New Member
- Joined
- Aug 23, 2004
- Messages
- 28 (0.00/day)
| Processor | Socket 478 Pentium 4 Prescott 3.2GHz @ 4.214GHz (1.6v) w/ 1MB L2 Cache |
|---|---|
| Motherboard | Asus P4C800-E Deluxe Rev 2.00 |
| Cooling | Cooler Master Hyper-6 CPU Cooler w/1x80mm, Swiftech MCX159-R Chipset Cooler w/1x40mm, 1x60mm for RAM |
| Memory | 2x1024MB OCZ PC4000 DDR Platinum Edition w/ Heatspreaders @ 263.3MHz (DDR527@2.8v) 3-3-2-8 |
| Video Card(s) | PowerColor X1950 Pro AGP 512MB DDR3 w/ Arctic Cooling Accelero X2 (Stock) |
| Storage | 2x320GB Seagate Barracuda 7200.10 in RAID-0 (ICH5R) & 1x500GB Seagate Barracuda 7200.10 |
| Display(s) | Gateway 2000 19" 1600x1200 CRT (1998) |
| Case | Cooler Master Praetorian 731 w/ 2x80mm front, 1x80mm top & 1x120mm side intake, 2x80mm rear exhaust |
| Audio Device(s) | Sound Blaster Audigy 2 ZS |
| Power Supply | OCZ Powerstream 520 |
| Software | Windows Vista Ultimate |
thanks w1zzard...been reading up on the posts, the fan feature is an excellent addition, i see you're the man to thank for this. very nicely done. my card's running 20C cooler with the fan at 100% as compared to dynamic temps.
Last edited:
today is a hot day, so i decided id experiment with my fan settings. I set it up to 100% (its a X800 Pro modded to XTPE). Where i was getting 47c idle, i am now getting 40 (which is what i normally run at. so if i can expect 33c on a normal day, id be vry happy. Only down side though is i can definatly hear the fan now 