• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ATITool 0.0.22 released!

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
17,165 (3.43/day)
Likes
18,135
Processor Core i7-4790K
Memory 16 GB
Video Card(s) GTX 1080
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 7
#1
http://atitool.techpowerup.com/ATITool_0.0.22.exe

- Fixes to card detection on some ATI chipsets
- Fixed "When setting the speed in the log the selected speed is shown not the actual speed it is set to." (#38)
- Added infobox about possible problems when FRAPS is running
- Removed fan control tab for 9600.
- Some fixes to "try to keep gpu temp at". It will only work while ATITool is running. If you close ATITool fan speeds are set to ATI's defaults
- Fixed temp. reading error which showed 20° on 9800s with high load sometimes
- Disabled creation of file C:\Atitool detection log.txt
- Fixed excessive log entries generated during Find Max (#29)
- Fixed 3D detection for XP SP2 + AMD64 (#25)
- Forced 3D detection on for all executables starting with "bf_vietnam" (Battlefield: Vietname) until a proper fix is found
- Forced 3D detection on for all executables starting with "nwmain" (Neverwinter Nights) until a proper fix is found
- Fixed rounding error in fan speed settings (#16)
- Fixed rounding error in font size display in temp. settings (#23)
- Added current fan speed display to fan speed settings (#22)
- Memory timings editor is active now- values are not permanent and are reset at reboot. USE AT YOUR OWN RISK.
- Gamma settings are reapplied when display mode is changed (#14)
- Gamma settings panel shows numbers (#14)
- Added fan control option "Try to keep GPU temp. at xx°C" - this option is only available if temp. monitoring is enabled
- Added mini stats to temp. monitoring settings page
- Several speed optimized artifact detection code
- Dump bios button disabled on 9200 until a fix is found
- Replace temp. remote / local by "GPU" / "GPU environment"
- Fixed cosmetic bug in temp. settings panel (#15)
- Fixed bug with log file max. size .. the value was interpreted as Bytes (#13)
- Added include list for 3D detection
- No "scan running" message to log file right after start
- Fixed crash in 3D detection for 3dmark2001 and probably other apps
- Gamma hotkeys are disabled when gamma control is disabled
- Lots of fixes based on the great feedback after the 0.0.21 release, critical fixes are already incorporated into the 0.0.21 download
- Added option to scanning settings: "disable screensaver while scanning"
- Fixed ATI fan control. for some reason ATI defaults result in fan speeds > 100% to be programmed. This means that any fan speed >75% is actually 100% (can't run the fan faster than 100%). ATITool fixes this by setting the right register on the temp. chip.
- Moved fan speed registry key so its not lost every time you reinstall ATITool
 

kovenant

New Member
Joined
Aug 16, 2004
Messages
3 (0.00/day)
Likes
0
Location
Thassos, Hellas
#4
Hello w1zzard

this time you were fast man!

thanx for your nice tool and your hard work

i have a feeling that we r going to see really big things from you in the future