Hello and sorry for my English,
I recently replaced my 2700x for a 3800x and a new ram kit Gskill f4-3600c16d-32gtzrc (SK Hynix) 2x16Go wich DOCP profile is 3600 C16-19-19-19-39. Im running bios 2704.
When I set the DOCP profile for my ram, it will boot for the first time, with no errors on memtest64, but if I shut down/reboot the PC..it will not post again (or post but BSOD Windows just after).
I tried to lower timings, I tried at 3400/3200, same.
I tried some timings on the Ryzen Dram calculator and same..
It only boot and boot again at 3000Mhz..wich is pretty bad for this ram/CPU..
If anyone could help me..
I recently replaced my 2700x for a 3800x and a new ram kit Gskill f4-3600c16d-32gtzrc (SK Hynix) 2x16Go wich DOCP profile is 3600 C16-19-19-19-39. Im running bios 2704.
When I set the DOCP profile for my ram, it will boot for the first time, with no errors on memtest64, but if I shut down/reboot the PC..it will not post again (or post but BSOD Windows just after).
I tried to lower timings, I tried at 3400/3200, same.
I tried some timings on the Ryzen Dram calculator and same..
It only boot and boot again at 3000Mhz..wich is pretty bad for this ram/CPU..
If anyone could help me..