Alrighty, I got some pretty crap pictures, but hopefully they don't burn out anyones eyes. They're all sized down to 1024x768 to try to hide the deficiency of my camera. The whole thing was beige before I got to painting it. The front panel was beige with black trim, now black with silver trim. All the components are in my specs off to the side there.
The front panel is two plastic bezels that snap together. There was some stuff inside that had to come out. Little stock LED's that go in those little fixtures along with the backing just looked like crap, and were way too bright. That "grill" was actually hidden behind the original grill which had some tacky branding on it. After touching that up with paint it looked a lot better. There's a 120mm on the bottom, a 92mm in the middle (you can see the red sticker), and those dual 80mm fans up top are custom made and fitted. All the fans in the front are blowing in, and they're not loud at all.
One thing I like to see a picture of, though it isn't too pretty and flashy, is whether or not the backside of your case looks like a demon is popping out of it from all the cable hiding. As you can see, straight flat lines and no horrible bulges. I'm still contemplating adding a fan to the back of it directly behind the CPU...
The side window was custom done as well. A friend of mine was cleaning out his basement and had a perfectly good piece of plexiglass that he gave to me. This is a rather flattering picture of it. It's more scratched up than it looks due to some sloppy dremel work before I bought that very handy cutting tool (Thanks MK). The bottom vents actually push out a bit of air, but given the amount of flow, its easily compensated for.
There is a heatsink under that 92mm fan, and yes it's held on by bread ties. Sapphire 9600pro, core OC's very well from 400 to 520 for benching, and 460 for gaming. The memory however is crap, stock at 200 and barely gets to 210 before artifacts become apparent. I've done benching runs at 220 though.
1gb OCZ ddr @ 333mhz 2-2-4-6 courtesy of DanishDevil. I think he may still have a few things
for sale. It matches the board nicely, and makes a HUGE difference in my day to day. Gotta give props to him for it
Also to note is the stock cooler and Thermaltake fan. That's the loud one for this case. If it didn't do such good temps I'd have replaced it already (idle 26c/load 34c).
Always an afterthought, but I really should have painted that PSU. It's modded to fit a 120mm fan, but the one in front is the only one I had to spare. Had it running with my old case for a while. Probably gonna procure one sometime soon to slap on there.
Lastly, on the back the fan grills are cut out, probably gonna get some wire ones to put on there when I can find them. The PCI slots were all removed and replaced with mesh which just looks a lot nicer and allows excess air to flow out the back.
That's all for me at the moment. I've got another case that I've been working on for a while, but it's mostly done. When I get a chance to start on something fresh I'll more than likely start a worklog if people like my style
Hope this qualifies me!