NaughtyGurame
New Member
- Joined
- Sep 20, 2020
- Messages
- 9 (0.01/day)
Clear the BD PROCHOT box and update to ThrottleStop 9.3Any advice?
This is normal. Manufacturers do this to protect the battery from a sudden power surge. If you are running a full load stress test and you switch to battery power, this can be very hard on the battery. It is OK for the CPU to briefly slow down when switching to battery power. If BD PROCHOT is constantly red after switching to battery power, that would be bad. BD PROCHOT switching to red for 5 or 10 seconds is normal when switching to battery power. A yellow box in Limit Reasons is just a record that this type of throttling happened. A red box means throttling is in progress.The only issue (I'm aware of) is, that when I unplug my adaptor,
BD prochot lights up in red
DATE TIME MULTI C0% CKMOD BAT_mW TEMP NVIDIA GPU VID POWER
2021-07-25 14:25:29 15.05 6.9 100.0 0 41 0 0 0.5536 1.9
2021-07-25 14:25:30 15.82 5.2 100.0 0 41 0 0 0.7577 1.8
2021-07-25 14:25:31 12.30 5.5 100.0 0 41 0 0 0.5458 1.6
2021-07-25 14:25:32 17.23 3.7 100.0 0 41 0 0 0.5479 1.5
2021-07-25 14:25:33 16.49 3.6 100.0 0 41 0 0 0.5486 1.5
2021-07-25 14:25:34 POWER STATUS CHANGE
2021-07-25 14:25:34 10.27 22.7 100.0 -10989 42 0 0 0.5518 2.8 BDPRO
2021-07-25 14:25:35 8.48 46.0 100.0 -10989 41 300 41 0.5563 12.4 BDPRO
2021-07-25 14:25:36 14.52 13.1 100.0 -10989 41 300 41 0.5485 12.7
2021-07-25 14:25:37 12.83 2.4 100.0 -10989 41 0 0 0.5522 11.9
2021-07-25 14:25:38 13.62 2.3 100.0 -10989 41 0 0 0.5541 11.9
2021-07-25 14:25:39 12.82 2.9 100.0 -10989 41 0 0 0.5491 11.9