- Joined
- Jul 3, 2020
- Messages
- 13 (0.01/day)
- Location
- Istanbul
System Name | Failure |
---|---|
Processor | AMD Ryzen 5 2600 3.4GHz 16MB 6/12C 12nm |
Motherboard | MSI A320M PRO-VH PLUS |
Cooling | ID-Cooling Frostflow X 240 |
Memory | G.skill RipjawsV 16GB (2x8) 3000MHz DDR4 CL16 RAM |
Video Card(s) | Sapphire Pulse RX 580 4GB 256 BIT GDDR5 |
Storage | WD Blue 1TB + WD Blue 1TB + WD Purple 1TB HDD + Adata Ultimate SU650 240G + Samsung PM991A 256G SSD |
Display(s) | BenQ GW2270H 1080p 60Hz 5MS VA + LG 22MN430M-B 1080p 75Hz 5MS IPS |
Case | MSI MAG Forge 100M |
Audio Device(s) | Cooler Master CH321 Headset |
Power Supply | Silverstone Strider Essential 500W 80+ Bronze (ST50F-ES230) |
Mouse | Logitech G102 |
Keyboard | Logitech G213 |
Software | Windows 11 (21H2) + Fedora 37 |
Benchmark Scores | The less I know the better. |
Yello! I really need your help. This will be my first thread on TPU so pardon me if I make a mistake.
I am having issues with my second system (Which is 12 year old I guess.) due to new GPU installation. System specification:
When I start the system, HD 7770's fan starts to run fast then slows, then run fast and slows again. It happens for 4-6 times. It is like a boot loop. Then I hear 1 long and 2 short beeps and GPU fan starts running at maximum speed and It won't stop until I shut down the system. They say, that beeps mean there is something wrong with GPU but actually it works perfectly fine on my first system.
To test it, I installed HD 3870 back and system run without any problem. So I think there is a problem with compatibility. I think the problem is due to the graphic card not being recognised properly during the boot phase. I tried many methods to fix it but couldn't succeed. That's why I am here. There is one thing I found that can be count as a temporary fix. I can use HD 7770 whenever I clear CMOS. When I clear CMOS, HD 7770 works like nothing happened and I can use its full power without any problem after, but the thing is, I DO NOT want to clear CMOS everytime I use my second system because I use it very often. There must be a fix for this. I hope you can help me. I think I have tried everything I could think of.
I have tried, updating BIOS and VBIOS*, removing BIOS Battery, disassembling all of the components etc. I even tested the PSU's voltage values with AIDA64 Extreme and both +12V and +3.3V rails were optimal both in idle and FurMark test. As I said, I checked all the components and there is not a single defective one. That's why I think there is a problem with compatibility between my motherboard and GPU.
You guys have any suggestion for me? Much appreciated
*After updating VBIOS, It worked for two days without any problem and I thought I finally fixed it but it happened again today
Note: I am on latest drivers with HD 7770. (Adrenalin 2020 Edition 20.4.2 WHQL) And of course, I tested if the problem is due to a driver error but sadly, no.
I am having issues with my second system (Which is 12 year old I guess.) due to new GPU installation. System specification:
- Intel Core 2 DUO E8500 3.16GHz 6MB Processor
- Gigabyte GA-EP45-DS3L Motherboard
- Kingston 2GB (1+1) 667MHz DDR2 CL5 + ADATA 2GB 667MHz DDR2 CL5 + Kreton Corp. 2GB 667MHz DDR2 CL5 = Total 6 GB RAM (1+1+2+2)
- Sapphire Radeon HD 3870 512MB 256BIT GDDR3 (100225DDR3L)
- Samsung Spinpoint F1 320GB 16MB 7200RPM SataII 16MB HDD (HD322HJ)
- Cooler Master Elite RC-333 Case
- Cooler Master Extreme Power Plus 390W Power Supply (RS-390 PMSP-A3)
When I start the system, HD 7770's fan starts to run fast then slows, then run fast and slows again. It happens for 4-6 times. It is like a boot loop. Then I hear 1 long and 2 short beeps and GPU fan starts running at maximum speed and It won't stop until I shut down the system. They say, that beeps mean there is something wrong with GPU but actually it works perfectly fine on my first system.
To test it, I installed HD 3870 back and system run without any problem. So I think there is a problem with compatibility. I think the problem is due to the graphic card not being recognised properly during the boot phase. I tried many methods to fix it but couldn't succeed. That's why I am here. There is one thing I found that can be count as a temporary fix. I can use HD 7770 whenever I clear CMOS. When I clear CMOS, HD 7770 works like nothing happened and I can use its full power without any problem after, but the thing is, I DO NOT want to clear CMOS everytime I use my second system because I use it very often. There must be a fix for this. I hope you can help me. I think I have tried everything I could think of.
I have tried, updating BIOS and VBIOS*, removing BIOS Battery, disassembling all of the components etc. I even tested the PSU's voltage values with AIDA64 Extreme and both +12V and +3.3V rails were optimal both in idle and FurMark test. As I said, I checked all the components and there is not a single defective one. That's why I think there is a problem with compatibility between my motherboard and GPU.
You guys have any suggestion for me? Much appreciated
*After updating VBIOS, It worked for two days without any problem and I thought I finally fixed it but it happened again today
Note: I am on latest drivers with HD 7770. (Adrenalin 2020 Edition 20.4.2 WHQL) And of course, I tested if the problem is due to a driver error but sadly, no.
Last edited: