boot up problem. very weird.

[iJatt]

i will. gonna turn my pc off tonight and boot it tomorrow morning...stick around though dude so you can help me out more just in case.

 

[Chicken Patty]

i'll be here man, although for now I'm going to sleep though, its 2am here in Miami. Don't worry i'll be around dude, goodnight, or day hehe, i dont know where you live.

 

[iJatt]

haha alright cool man

Arizona.

 

[iJatt]

hey man..how do i set my pci-e frequency to 100 mhz...i think it's a little bit above that cause i never locked it..can u tell me how i can lock it and second according to this what is my memory timing...ii think i may know what the problem is: memory timings or pci-e bus frequency.

 

[Chicken Patty]

hey man..how do i set my pci-e frequency to 100 mhz...i think it's a little bit above that cause i never locked it..can u tell me how i can lock it and second according to this what is my memory timing...ii think i may know what the problem is: memory timings or pci-e bus frequency.

Make sure your PCI-E clock is at 100MHz. As far as locking, I don't know dude, i've never used the Nvidia Control Panel before.

Your memory timings set them like this and see if by any chance the computer crashes and doesn't boot or anything, you're going to have to reset the bios and start over.

Timings should be like this

CAS - 5 clks (already at that, don't change)
tRCD - 5 clks
TRP - 5 clks
tRAS - 18 clks

 

[Chicken Patty]

^^^remember one thing though, I believe what ever you do on the control panel will only work until the computer is restarted. To keep these settings permanent you have to do it in the BIOS.

 

[iJatt]

i booted my pc up this morning with 2 gb of ram and it gave me the same bullshit BUT when i turned it off and and booted it again it started working WOOT! and i didn't even have to do anything..no swaps or any of that bullshit

i will try to do the memory timings in the bios next time i boot.

 

[Chicken Patty]

great man, i'm glad its finally working out for you bro. Keep me posted.

 

[Chicken Patty]

Hey buddy, hows the computer running, any more issues?

 

[iJatt]

hey what's up haha. well i haven't shut my pc off since last reset so i can't be too sure but i think the bios update might have fixed it. i still have to change the timings and such.

I have a lot of homework so i barely get time to do anything. Electrical Engineering tends to do that haha.

 

[Hayder_Master]

Should be able to overclock the rams to 800mhz. What voltage did you set it to ?

800 it is original ram fsb , you don't need to increase ram voltage , try update your bios

 

[Chicken Patty]

800 it is original ram fsb , you don't need to increase ram voltage , try update your bios

His motherboard supports only up to 667. So he can't run his ram at 800 even if he wanted to. On top of that he already updated his bios and he said it was fine now.

 

[iJatt]

hey chicken patty, i just read on my memory sticks "5-5-5-14"

 

[Chicken Patty]

what does CPUZ show now?

 

[iJatt]

this is what it shows.

 

[Chicken Patty]

is the comp running fine? Is the boot up problem still going?

 

[iJatt]

i tested it earlier and it didn't work ( boot up wise). Then i tried something new. I connect video cable to onboard graphics instead of my 8800. to my surprise the pc started up fine on the first try ( can't be sure if this was vga problem because i had swapped memory couple of times before doing this). I also took out my sound card.

i will get back to you on this issue after i turn my pc off...it's not that im lazy hehe...i have A LOT of homework and need to study pretty much 24/7.

 

[Chicken Patty]

i tested it earlier and it didn't work ( boot up wise). Then i tried something new. I connect video cable to onboard graphics instead of my 8800. to my surprise the pc started up fine on the first try ( can't be sure if this was vga problem because i had swapped memory couple of times before doing this). I also took out my sound card.

i will get back to you on this issue after i turn my pc off...it's not that im lazy hehe...i have A LOT of homework and need to study pretty much 24/7.

dont worry i'll be here bro.

 

[lightspeed500]

Boot up Problems.

Hi i have Intel c2d e7200 paired with ecs-gf7050vt- motherboard, 8800 gs gpu and 2 gigs of corsair ddr2 pc2 6400 memory. this is the memory i believe well that's what it looks like
http://www.goldduo.com/index.php?main_page=product_info&products_id=113085

btw my mobo limits my memory at 667 mhz rather than 800 mhz

when i turn my pc off over night and start it up next morning...my pc starts up but my screen doesn't...i found a method to fix this though..i have to remove the memory then start the pc then turn it off after 10 seconds then re-insert the memory but in different slots ...so like 1 slot bay gets the ram that was previously in slot 2.


i hate doing this everytime..can someone tell me what could be wrong? oh btw i oced my memory to 800 mhz even though thats what it should be running at stock but mobo is gay..but i returneed it to stock configurations like 2 weeks ago after like 3 days of usage while oced. maybe the timings are wrong?> please help

I have a Systemax PC with Amd 2400+ M7VIG Mother-board. I downloaded AMD Overdrive. It would not install and durring a reboot, I got 3 beeps insted of 1 and my drives did not sound right also my screen was grey with no pointer. I can not access BIOS when I startup, and using the Jumpers I still cannot reset Bios. HELP!

 

[Chicken Patty]

I have a Systemax PC with Amd 2400+ M7VIG Mother-board. I downloaded AMD Overdrive. It would not install and durring a reboot, I got 3 beeps insted of 1 and my drives did not sound right also my screen was grey with no pointer. I can not access BIOS when I startup, and using the Jumpers I still cannot reset Bios. HELP!

how many sticks of ram do you have?


Also, do you remember where you d/l'ed AOD from?

 

[lightspeed500]

how many sticks of ram do you have?


Also, do you remember where you d/l'ed AOD from?

Newer version available: AMD Overdrive "No AMD CPU detected" Fix <---<<< this was the download, I'm sure the site (washttp://www.techpowerup.com/downloads/844/AMD_Overdrive_2.10.html) Also I have 1 stick 512.

 

[iJatt]

Have you tried taking out the memory, starting pc for 20 seconds without memory, reinserting memory and then booting it? ...it may take couple of tries.

 

[lightspeed500]

Bottup.

Have you tried taking out the memory, starting pc for 20 seconds without memory, reinserting memory and then booting it? ...it may take couple of tries.

I'm gunna give it a try. I just pulled My stick out and put it in a differant slot, no wait time. The result was a 3 second beep every 5 seconds, no screen. Will pull it again and wait a while befor putting it back in. I will let you know what happens.

 

[lightspeed500]

Gave it a try.

I'm gunna give it a try. I just pulled My stick out and put it in a differant slot, no wait time. The result was a 3 second beep every 5 seconds, no screen. Will pull it again and wait a while befor putting it back in. I will let you know what happens.

I pulled the stick and waited about 4 minuts and put it back in the original slot. Now when I power-up I hear, BEEEEEP BEEP BEEP, Heeee uuuuum! and no screen.

 

[Hayder_Master]

His motherboard supports only up to 667. So he can't run his ram at 800 even if he wanted to. On top of that he already updated his bios and he said it was fine now.

ohh., you right man , so he have good staff why he take mobo like this