Whats happening.
Bricked my Rx 470 due to a bad flash.
After the flash my complete system wont start and the screen stays black. Theres an onboard card in there which is primarily the output.
So i decided to do the 1 and 8 pins and voila the systeem booted.. removed the wire but... when running atiflash the card wont show..
Strange thing here is that after i did the 1 to 8 pin the systeem now boots normally. No black screens before starting. No need to do the 1 to 8 pins..
Any idea how to fix this? Maybe an external programmer to reflash the bios?
In the attachment is the bios chip i located on the board but i cant find any information on the web about it.
(logo) AH1602 25Q21BT E66536 is the text on the chip
I also have an identical 2nd card. Should i try to swap the cards while the system is running?
Bricked my Rx 470 due to a bad flash.
After the flash my complete system wont start and the screen stays black. Theres an onboard card in there which is primarily the output.
So i decided to do the 1 and 8 pins and voila the systeem booted.. removed the wire but... when running atiflash the card wont show..
Strange thing here is that after i did the 1 to 8 pin the systeem now boots normally. No black screens before starting. No need to do the 1 to 8 pins..
Any idea how to fix this? Maybe an external programmer to reflash the bios?
In the attachment is the bios chip i located on the board but i cant find any information on the web about it.
(logo) AH1602 25Q21BT E66536 is the text on the chip
I also have an identical 2nd card. Should i try to swap the cards while the system is running?