GabNovo
New Member
- Joined
- Jan 27, 2018
- Messages
- 2 (0.00/day)
Hi Guys,
First of all, hello, im new here.
As it comes i may have a issue which wasnt seen before. I recently bought a Gigabyte 1050TI OC with a bios version of 86.07.42.00.99 and tried to flash it to 86.07.39.40.99 via the newest NVFLASH. While i did so it asked me about "Firmware image PCI Subsystem ID" where there was a mismatch, and it asked me if i wanted to proceed. I did and the result is a card which is detected in windows with a exclamation mark next to it. Its also detected in NVFLASH, but cant be reflashed. When used as as primary adapter (connected to monitor), windows boots but shows artifacts.
NVFLASH gives me this info when i try to flash any bios onto the card
C:\nvflash>nvflash64 --index=1 -6 flash.rom
NVIDIA Firmware Update Utility (Version 5.427.0)
Simplified Version For OEM Only
Copyright (C) 1993-2017, NVIDIA Corporation. All rights reserved.
Checking for matches between display adapter(s) and image(s)...
Adapter: GeForce GTX 1050 Ti (10DE,1C82,1458,3763) H:--:NRM S:00,B:02,D:00,F:00
PMU reset control is disallowed! (PLM=0x00000067)
A system restart might be required before running the utility.
Command failed to complete mailbox0 = 10000002
Command id: 0x0000002 Command: NV_UCODE_CMD_COMMAND_EID failed
Command Status: NV_UCODE_CMD_STS_NONE
Error Code= 0x00000001: NV_UCODE_ERR_CODE_CMD_TIMEOUT
uCode fails to return before max waiting time expires.
Results:
Index | Match | Flash | Name
<01> GeForce GTX 1050 Ti (10DE,1C82,1458,3763) S:00, B:02
Nothing changed!
ERROR: Detecting GPU failed.
Does anyone now how this could be fixed ? Im happy for any reply.
Thanks
UPDATE0: When used as single graphic card in the system and with no driver installed, windows boots in full res (no acceleration) and keeps working
First of all, hello, im new here.
As it comes i may have a issue which wasnt seen before. I recently bought a Gigabyte 1050TI OC with a bios version of 86.07.42.00.99 and tried to flash it to 86.07.39.40.99 via the newest NVFLASH. While i did so it asked me about "Firmware image PCI Subsystem ID" where there was a mismatch, and it asked me if i wanted to proceed. I did and the result is a card which is detected in windows with a exclamation mark next to it. Its also detected in NVFLASH, but cant be reflashed. When used as as primary adapter (connected to monitor), windows boots but shows artifacts.
NVFLASH gives me this info when i try to flash any bios onto the card
C:\nvflash>nvflash64 --index=1 -6 flash.rom
NVIDIA Firmware Update Utility (Version 5.427.0)
Simplified Version For OEM Only
Copyright (C) 1993-2017, NVIDIA Corporation. All rights reserved.
Checking for matches between display adapter(s) and image(s)...
Adapter: GeForce GTX 1050 Ti (10DE,1C82,1458,3763) H:--:NRM S:00,B:02,D:00,F:00
PMU reset control is disallowed! (PLM=0x00000067)
A system restart might be required before running the utility.
Command failed to complete mailbox0 = 10000002
Command id: 0x0000002 Command: NV_UCODE_CMD_COMMAND_EID failed
Command Status: NV_UCODE_CMD_STS_NONE
Error Code= 0x00000001: NV_UCODE_ERR_CODE_CMD_TIMEOUT
uCode fails to return before max waiting time expires.
Results:
Index | Match | Flash | Name
<01> GeForce GTX 1050 Ti (10DE,1C82,1458,3763) S:00, B:02
Nothing changed!
ERROR: Detecting GPU failed.
Does anyone now how this could be fixed ? Im happy for any reply.
Thanks
UPDATE0: When used as single graphic card in the system and with no driver installed, windows boots in full res (no acceleration) and keeps working
Attachments
Last edited: