Garb3
New Member
- Joined
- Dec 5, 2006
- Messages
- 398 (0.06/day)
- Location
- Hartlepool, England
Processor | AMD Athlon 5200+ x2 stock |
---|---|
Motherboard | Abit KN9-S |
Cooling | zalman 9500 modded with 120mm fan + 3x120mm front, rear and side fans |
Memory | OCZ 5GB DDR2 PC2-6400 800MHz Gold GX XTC |
Video Card(s) | PowerColour Ati Radeon 3850 512Mb |
Storage | 220 gig |
Display(s) | LG Flatron L1730S |
Case | Termaltake VC2000 Mambo (Black) |
Audio Device(s) | Realtek AC 97 HD |
Power Supply | EYE-T POWER MAGNA 600W |
Software | Windows Vista 64bit |
well it was only by chance that i look inside my case about 2 hours ago my mam was makin a fuss cause the pump in my water cooling kit was makin to much noise( vibrations :S). Any way i thought i would just check and see how everything was cause it didnt seem to be makin anymore noise than usual. anyway there was a tiny little wet patch creepin ever sooooooooo slowly towards a molex connector. so as u do i quickly turned everything off and checked all the connections with only the pump running and it seem that when i put i put me new coolant in at the weekend i have cracked one of the acrilic thread on the pump( out take bit) so i just spent the last 2 hours taking my watercolling out of my case and putting back on my zalman which was a pain in the arse.
anyway i just thought i would tell you guys so that u can all either give me your sympathy( or just have a good laugh)
anyway i just thought i would tell you guys so that u can all either give me your sympathy( or just have a good laugh)