Total Memory Size 8GB
Memory Type DDR3
Memory Slots (Total) 2
Memory Slots (Available) None
Maximum Memory Supported 8GB
Memory Configuration 4GB + 4GB
Processor Brand Intel
Processor Class Core i7
Processor Type Quad-Core
Processor Speed 1.6GHz
Processor Number i7-720QM
Operating System Windows 7 Ultimate
Graphics Description Dedicated Graphics
GPU/VPU ATI Mobility Radeon HD 5870
Video Memory 1GB GDDR5 discrete graphics memory
Before I send my unit out for a RMA I'm hoping maybe someone could help me out. Started happening about 8 days ago BSOD while playing Bioshock infinite, so I decided to update my Bios and Vbios so it could support the new drivers for my card threw AMD. I downloaded the new drivers that are supported for my card while rebooting after the install system hangs and BSOD appears so I went ahead, and logged into safe mode and rolled back to stock VGA driver which works fine then I started tinkering with a older driver CCC 10.11 and tried it out to see if it works, and yes it does work I added a folder with my .dmp files in it maybe someone could help me understand what is going on? This is how gpu-z looked right after I had my first BSOD
Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
This is what I got from GPU-Z
What I did to get gpu-z to read the card again I opened up my laptop repasted and seated the card while taking the battery out off the mother board for about 10 minutes put everything back together and the card was read again.
Memory Type DDR3
Memory Slots (Total) 2
Memory Slots (Available) None
Maximum Memory Supported 8GB
Memory Configuration 4GB + 4GB
Processor Brand Intel
Processor Class Core i7
Processor Type Quad-Core
Processor Speed 1.6GHz
Processor Number i7-720QM
Operating System Windows 7 Ultimate
Graphics Description Dedicated Graphics
GPU/VPU ATI Mobility Radeon HD 5870
Video Memory 1GB GDDR5 discrete graphics memory
Before I send my unit out for a RMA I'm hoping maybe someone could help me out. Started happening about 8 days ago BSOD while playing Bioshock infinite, so I decided to update my Bios and Vbios so it could support the new drivers for my card threw AMD. I downloaded the new drivers that are supported for my card while rebooting after the install system hangs and BSOD appears so I went ahead, and logged into safe mode and rolled back to stock VGA driver which works fine then I started tinkering with a older driver CCC 10.11 and tried it out to see if it works, and yes it does work I added a folder with my .dmp files in it maybe someone could help me understand what is going on? This is how gpu-z looked right after I had my first BSOD
Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
What I did to get gpu-z to read the card again I opened up my laptop repasted and seated the card while taking the battery out off the mother board for about 10 minutes put everything back together and the card was read again.
Attachments
Last edited: