• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Burning a CD........

Joined
Jun 26, 2006
Messages
97 (0.02/day)
Likes
0
Location
Brisbane
Processor Intel E8400 @ 4.02 Ghz
Motherboard Gigabyte EP45 - DS3R
Cooling 2 12cm Fans in rear and front + Thermaltake Big Typhoon
Memory 2 x 2GB 1066Mhz G.Skill CL5
Video Card(s) Gigabyte 9800GT 512Mb
Storage 2 x 80Gb Seagate Sata 1 x Seagate 1TB
Display(s) BenQ E2200HD 1920 x 1080 21.5" Monitor
Case Thermaltake Matrix Case
Audio Device(s) Asus Xonar D2X Audio card
Power Supply 860W El Cheapo With 3 fans.
Software XP Pro, Vista Ultimate 32bit, Vista Ultimate 64bit
#1
H'ok, so I just attacked by a virus (Funny, I know) and I cleared it up...I'm guessing, and now all of a sudden I can't burn cd's anymore. It's so weird, it burns perfectly for a little while, like it always has done (The burner is about a month old) and then it just STOPS straight away, but it was going PERFECTLY. Now I don't know if a virus is causing this, but I am sus about it. Any idea on how to narrow down the cause? I have tried a different brand of cd, exact same thing happens.
 

DanTheBanjoman

Señor Moderator
Joined
May 20, 2004
Messages
10,488 (2.10/day)
Likes
1,331
#2
What kind of errors does it give? ie what do you mean with "STOPS straight away"? Does it give buffer underruns or something?
 
Joined
Jun 26, 2006
Messages
97 (0.02/day)
Likes
0
Location
Brisbane
Processor Intel E8400 @ 4.02 Ghz
Motherboard Gigabyte EP45 - DS3R
Cooling 2 12cm Fans in rear and front + Thermaltake Big Typhoon
Memory 2 x 2GB 1066Mhz G.Skill CL5
Video Card(s) Gigabyte 9800GT 512Mb
Storage 2 x 80Gb Seagate Sata 1 x Seagate 1TB
Display(s) BenQ E2200HD 1920 x 1080 21.5" Monitor
Case Thermaltake Matrix Case
Audio Device(s) Asus Xonar D2X Audio card
Power Supply 860W El Cheapo With 3 fans.
Software XP Pro, Vista Ultimate 32bit, Vista Ultimate 64bit
#3
As in, it's going, going, still spinning at the same speed, Doesn't slow down at all and then just says (I'm using nero) Burn process failed at X speed. Also, are there any programs taht will cache an ENTIRE cd in to the memory? That's what I need, I have 2gb of ram, I'd like to use them to the best of a cd burns ability.
 
Joined
Jun 26, 2006
Messages
97 (0.02/day)
Likes
0
Location
Brisbane
Processor Intel E8400 @ 4.02 Ghz
Motherboard Gigabyte EP45 - DS3R
Cooling 2 12cm Fans in rear and front + Thermaltake Big Typhoon
Memory 2 x 2GB 1066Mhz G.Skill CL5
Video Card(s) Gigabyte 9800GT 512Mb
Storage 2 x 80Gb Seagate Sata 1 x Seagate 1TB
Display(s) BenQ E2200HD 1920 x 1080 21.5" Monitor
Case Thermaltake Matrix Case
Audio Device(s) Asus Xonar D2X Audio card
Power Supply 860W El Cheapo With 3 fans.
Software XP Pro, Vista Ultimate 32bit, Vista Ultimate 64bit
#5
...Then I forgot about the nero logger :roll: Here it is...wtf is a fixation error?


9:41:34 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 32x (4,800 KB/s)

9:41:34 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:41:34 PM #24 Text 0 File MMC.cpp, Line 22122
Set BUFE: Buffer underrun protection -> ON

9:42:33 PM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 09 40 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 14 59 57 0E 00 00 00 00 0C
Buffer x034c0000: Len x10000
0xF6 6C A3 75 A8 84 61 0A CF 70 10 3A 06 E0 26 F8
0x76 C3 E1 23 E0 7D 0C 5B C8 CE C3 EA 1D 91 33 4A
0x18 6E 03 A8 31 80 F0 AD C0 A6 67 F8 21 7A 68 19

9:42:33 PM #26 CDR -1135 File Writer.cpp, Line 302
Write error
D: PIONEER DVD-RW DVR-212

9:42:33 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:42:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

9:42:34 PM #29 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
D: PIONEER DVD-RW DVR-212

9:42:34 PM #30 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

9:42:34 PM #31 Text 0 File MMC.cpp, Line 16933
<PIONEER DVD-RW DVR-212 > start Close Session

9:42:39 PM #32 SPTI -1176 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 15 59 56 0E 00 00 00 00 72

9:42:39 PM #33 CDR -1176 File WriterStatus.cpp, Line 250
Session fixation error
D: PIONEER DVD-RW DVR-212

9:42:39 PM #34 TRANSFER -19 File WriterStatus.cpp, Line 250
Could not perform Fixation

9:42:39 PM #35 Text 0 File WriterStatus.cpp, Line 259
falling back to disc fixation

9:42:39 PM #36 Text 0 File MMC.cpp, Line 16933
<PIONEER DVD-RW DVR-212 > start Close Session

9:42:56 PM #37 SPTI -1176 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 16 07 59 0E 00 00 00 00 72

9:42:56 PM #38 CDR -1176 File WriterStatus.cpp, Line 250
Session fixation error
D: PIONEER DVD-RW DVR-212

9:42:56 PM #39 TRANSFER -19 File WriterStatus.cpp, Line 250
Could not perform Fixation

9:42:56 PM #40 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 32x (4,800 KB/s)
 

DanTheBanjoman

Señor Moderator
Joined
May 20, 2004
Messages
10,488 (2.10/day)
Likes
1,331
#6
Try the drive on another computer, clean the lens, lower writing speed, try different media.
If that doesn't work you could try updating the firmware.
 
Joined
Mar 27, 2007
Messages
2,746 (0.69/day)
Likes
371
Location
just outside of new orleans
Processor Intel Core i7-4790 Haswell Quad-Core 3.6GHz LGA 1150 84W
Motherboard GIGABYTE GA-H87-D3H LGA 1150 Intel H87 HDMI
Cooling CPU - Cooler Master Hyper T4 / Case - cooler master 120mm rear case fan (Air cooling)
Memory G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Video Card(s) ASUS GTX660-DC2O-2GD5 2GB 192-Bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI support
Storage Samsung 500 GB 840 EVO SSD Drive
Display(s) ASUS 23" LED Monitor
Case COOLER MASTER Centurion 5 (silver & black)
Audio Device(s) (onboard audio) Realtek ALC892
Power Supply CORSAIR SU-750TX 750W ATX12V / EPS12V
Software Windows 7 Home Premium 64bit Edition
#7
what about this "VIRUS" you just got rid of? maybe you got rid of more than just the virus.

what have you done to get rid of it and did you reload your drivers after?

did you try uninstalling nero and reinstalling it?