DTV DRAGON
New Member
- Joined
- Jun 3, 2008
- Messages
- 877 (0.15/day)
- Location
- canada
System Name | family system |
---|---|
Processor | intel quad core Q9650 o/c'ed to 4.1 |
Motherboard | gigabyte EP45T-USB3P ( new board) |
Cooling | custom cpu and gpu cooling |
Memory | 8 gig G.Skills RipJaws @ 7,8,7,24,@1440mhz |
Video Card(s) | HD5870 SAPPHIRE 1018@1310at1.29v on water |
Storage | 750 gig sata 7500rpm X2 seagate barracuda |
Display(s) | acer 22.5 lcd |
Case | Antec 600 |
Audio Device(s) | 7.1 internal, soon to be auzentech x-fi forte |
Power Supply | thermaltake 850 watt modular (new version, single rail) |
Software | Windows 7, 64 ult. |
Benchmark Scores | vantage E47428 3DMARK06 23290 needs updateing |
alot of great advice. I havent did memtest but did do windows memory test and it was ok. I think i will just hang tuff until rest of the new ram arrives and then set ip up in bios and see how it goes, I will raise my voltage up a notch or two as well to see if that helps, I kinda wish it would doit more often so i can kinda get a feel for whats cause ing it but it is very random. never when gaming, benching etc. always when puter is idle
can i raise my cpu pll higher than what it is? cause its at 1.57 but next setting in bios is i think i.68 or something like that, Iam thinking that might be too high
and what about cpu vcore its at 1.239 could i go to lets say 1.34?
stock speed and setting on ram are 9,9,9,24 and 1.5 volt, but i needed to raise volts a few notchs so it wouldnt freeze, as that was a big problem with these boards
can i raise my cpu pll higher than what it is? cause its at 1.57 but next setting in bios is i think i.68 or something like that, Iam thinking that might be too high
and what about cpu vcore its at 1.239 could i go to lets say 1.34?
stock speed and setting on ram are 9,9,9,24 and 1.5 volt, but i needed to raise volts a few notchs so it wouldnt freeze, as that was a big problem with these boards