• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Can't remove giant Cooler Master CPU fan/heatsink!!!

matteumayo

New Member
Joined
Feb 17, 2011
Messages
172 (0.04/day)
System Name derp
Processor Athlon II X4 2.8GHz
Motherboard ASROCK (exact model number not readily available)
Cooling Lots of fans?
Memory 4gb DDR3 G-Skill
Video Card(s) PowerColor 1gb 5850 hd
Storage 650gb Seagate
Display(s) Westington 19" 1440x900
Case Some Cooler Master case
Power Supply hec ORION 585w
Software Windows 7 64-bit
You may have seen my other thread, I'm trying to upgrade my CPU.

I have this huge (4-5" wide), unmarked Cooler Master cooler above my CPU that's secured on by 4 screws attached to the mobo.

However, I can't unscrew them because they're under the damn cooler!!! :banghead:



I have no idea what to do... please, help!
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,409 (4.47/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
take the motherboard out and see if you can remove it from the back, if not then I suggest you get some swivel adapters or one of those flexible spring adapters for power drills.
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.62/day)
WHUT cooler is that thing?

Pull off fans?

Funny one, for sure.
 

matteumayo

New Member
Joined
Feb 17, 2011
Messages
172 (0.04/day)
System Name derp
Processor Athlon II X4 2.8GHz
Motherboard ASROCK (exact model number not readily available)
Cooling Lots of fans?
Memory 4gb DDR3 G-Skill
Video Card(s) PowerColor 1gb 5850 hd
Storage 650gb Seagate
Display(s) Westington 19" 1440x900
Case Some Cooler Master case
Power Supply hec ORION 585w
Software Windows 7 64-bit
Doesn't seem I can remove it from the back of the mobo.

Also, I initially tried to take off the two fans, but they seem to have 4 screws one each side (wtf were they thinking when they made this thing).
 

Thatguy

New Member
Joined
Nov 24, 2010
Messages
666 (0.14/day)
I have used a similar cooler before, typically they come with a right angle tool for instilation/removal.
 
Joined
May 16, 2011
Messages
1,430 (0.30/day)
Location
A frozen turdberg.
System Name Runs Smooth
Processor FX 8350
Motherboard Crosshair V Formula Z
Cooling Corsair H110 with AeroCool Shark 140mm fans
Memory 16GB G-skill Trident X 1866 Cl. 8
Video Card(s) HIS 7970 IceQ X² GHZ Edition
Storage OCZ Vector 256GB SSD & 1Tb piece of crap
Display(s) acer H243H
Case NZXT Phantom 820 matte black
Audio Device(s) Nada
Power Supply NZXT Hale90 V2 850 watt
Software Windows 7 Pro
Benchmark Scores Lesbians are hot!!!
How did you get it on?
 

matteumayo

New Member
Joined
Feb 17, 2011
Messages
172 (0.04/day)
System Name derp
Processor Athlon II X4 2.8GHz
Motherboard ASROCK (exact model number not readily available)
Cooling Lots of fans?
Memory 4gb DDR3 G-Skill
Video Card(s) PowerColor 1gb 5850 hd
Storage 650gb Seagate
Display(s) Westington 19" 1440x900
Case Some Cooler Master case
Power Supply hec ORION 585w
Software Windows 7 64-bit
Joined
May 16, 2011
Messages
1,430 (0.30/day)
Location
A frozen turdberg.
System Name Runs Smooth
Processor FX 8350
Motherboard Crosshair V Formula Z
Cooling Corsair H110 with AeroCool Shark 140mm fans
Memory 16GB G-skill Trident X 1866 Cl. 8
Video Card(s) HIS 7970 IceQ X² GHZ Edition
Storage OCZ Vector 256GB SSD & 1Tb piece of crap
Display(s) acer H243H
Case NZXT Phantom 820 matte black
Audio Device(s) Nada
Power Supply NZXT Hale90 V2 850 watt
Software Windows 7 Pro
Benchmark Scores Lesbians are hot!!!
well it comes with a cap for the bolt/screw and a right angle screwdrive wrench, similar to what comes in many garbage disposal kits.

So in other words, don't lose it or you're screwed.
 

matteumayo

New Member
Joined
Feb 17, 2011
Messages
172 (0.04/day)
System Name derp
Processor Athlon II X4 2.8GHz
Motherboard ASROCK (exact model number not readily available)
Cooling Lots of fans?
Memory 4gb DDR3 G-Skill
Video Card(s) PowerColor 1gb 5850 hd
Storage 650gb Seagate
Display(s) Westington 19" 1440x900
Case Some Cooler Master case
Power Supply hec ORION 585w
Software Windows 7 64-bit
Joined
Jul 19, 2006
Messages
43,586 (6.73/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
It's a Hyper 212 with two fans on it. On the backside of the motherboard it uses nuts. As ThatGuy said it comes with the hardware kit. If you don't have the hardware kit I think it's a 10mm socket that would work.

How would that work?

What do you mean? You unscrew the nuts on the back.
 

matteumayo

New Member
Joined
Feb 17, 2011
Messages
172 (0.04/day)
System Name derp
Processor Athlon II X4 2.8GHz
Motherboard ASROCK (exact model number not readily available)
Cooling Lots of fans?
Memory 4gb DDR3 G-Skill
Video Card(s) PowerColor 1gb 5850 hd
Storage 650gb Seagate
Display(s) Westington 19" 1440x900
Case Some Cooler Master case
Power Supply hec ORION 585w
Software Windows 7 64-bit
It's a Hyper 212 with two fans on it. On the backside of the motherboard it uses nuts. As ThatGuy said it comes with the hardware kit. If you don't have the hardware kit I think it's a 10mm socket that would work.



What do you mean? You unscrew the nuts on the back.

I see, I'll try this now.
 
Joined
Nov 1, 2008
Messages
4,213 (0.75/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
yea, it looks like it's attached similar to a v8, if you don;t have the head to unscrew the nuts you can probabily loosen them (carefully) with a pair of pliers, then you can unscrew them with your fingers.

One other thing. Don;t be surprised if the Thermal compound has dried solid, essentially gluing the HSF to the cpu. Don't try to yank it off! wiggle it with a twisting motion and be patient, it will eventually come free.
 
Joined
Jul 19, 2006
Messages
43,586 (6.73/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11

bostonbuddy

New Member
Joined
Apr 14, 2011
Messages
381 (0.08/day)
it should unscrew from the underside of the motherboard.
Can your remove the panel of the case behind the motherboard and unscrew it w/o removing the motherboard?
 
Joined
Jul 21, 2008
Messages
5,174 (0.90/day)
System Name [Daily Driver]
Processor [Ryzen 7 5800X3D]
Motherboard [Asus TUF GAMING X570-PLUS]
Cooling [be quiet! Dark Rock Slim]
Memory [64GB Corsair Vengeance LPX 3600MHz (16GBx4)]
Video Card(s) [PNY RTX 3070Ti XLR8]
Storage [1TB SN850 NVMe, 4TB 990 Pro NVMe, 2TB 870 EVO SSD, 2TB SA510 SSD]
Display(s) [2x 27" HP X27q at 1440p]
Case [Fractal Meshify-C]
Audio Device(s) [Steelseries Arctis Pro]
Power Supply [CORSAIR RMx 1000]
Mouse [Logitech G Pro Wireless]
Keyboard [Logitech G512 Carbon (GX-Brown)]
Software [Windows 11 64-Bit]
Just take the mobo out and unscrew the nuts holding it on? Or is that too simple.. in which cause u could.. CUT IT OUT WITH A MOTHA F'IN CHAINSAW U MOTHER F'ER... video tape that if u do.
 
Joined
Jan 17, 2010
Messages
12,280 (2.36/day)
Location
Oregon
System Name Juliette // HTPC
Processor Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling Noctua NH-U12 Black // Stock
Memory Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s) ASUS RTX4070 OC// GTX 1650
Storage Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s) ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s) Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse Cooler Master MM710 53G
Keyboard Logitech 920-009300 G512 SE
Software Windows 10 Pro // Windows 10 Pro
Right angle screw driver...Google it
 

matteumayo

New Member
Joined
Feb 17, 2011
Messages
172 (0.04/day)
System Name derp
Processor Athlon II X4 2.8GHz
Motherboard ASROCK (exact model number not readily available)
Cooling Lots of fans?
Memory 4gb DDR3 G-Skill
Video Card(s) PowerColor 1gb 5850 hd
Storage 650gb Seagate
Display(s) Westington 19" 1440x900
Case Some Cooler Master case
Power Supply hec ORION 585w
Software Windows 7 64-bit
Bad news. Very bad.

I got the CPU in and everything, reinstalled the cooler, and stuck the mobo back in.

I then plugged in (what I think are) the correct wires to the mobo and screwed it in.

Hooked everything back up, plugged it in, turned the psu on, and hit the power button;

nothing happened.

I seriously don't know what to do, or even what I did wrong.

There is no response whatsoever to the power being turned on or off. :cry:
 
Joined
Oct 29, 2009
Messages
2,669 (0.51/day)
System Name Old Gateway / Steam Deck OLED LE
Processor i5 4440 3.1ghz / Jupiter 4c 8t
Motherboard Gateway / Valve
Cooling Eh it doesn't thermal throttle
Memory 2x 8GB JEDEC 1600mhz DDR3 / 16gb DDR5 6400
Video Card(s) RX 560D 4GB / Navi II 8CU
Storage 240gb 2.5 SSD / 1TB nvme
Display(s) Dell @ 1280*1024 75hz / 800p OLED
Case Gateway / Valve LE
Audio Device(s) Gateway Diamond Audio EMC2.0-USB 5375U ($15 a long ass time ago), Valve
Power Supply 380w oem / 65w valve USB-C
Mouse Purple Walmart special, 1600dpi. Black desk mat
Keyboard SteelSeries Apex 100 / virtual
VR HMD Lmao
Software Windows 10 / Steam OS
Benchmark Scores It can run Crysis (Original), Doom 2016, and Halo MCC. SD LE 45fps
double check all connections to the 24/24+4pin, and the 4pin cpu connector. Also check your front panel plugs and see if they came lose.

also double check to see if your board supports the new cpu
 
Joined
Jan 17, 2010
Messages
12,280 (2.36/day)
Location
Oregon
System Name Juliette // HTPC
Processor Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling Noctua NH-U12 Black // Stock
Memory Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s) ASUS RTX4070 OC// GTX 1650
Storage Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s) ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s) Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse Cooler Master MM710 53G
Keyboard Logitech 920-009300 G512 SE
Software Windows 10 Pro // Windows 10 Pro
You forgot or wrong pin the front panel wires or the 4 pin CPU plug. Ben there done that
 
Joined
Jul 20, 2008
Messages
4,016 (0.70/day)
Location
Ohio
System Name Desktop|| Virtual Host 0
Processor Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads)
Motherboard ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset)
Cooling Corsair Hydro H100 || Stock hotplug fans and passive heatsinks
Memory 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs
Video Card(s) MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care
Storage Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure
Display(s) ViewSonic VA2349S || remote iDRAC KVM console
Case Antec P280 || Dell PowerEdge R710
Audio Device(s) HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care
Power Supply SeaSonic X650 Gold || 2x870w hot-swappable
Mouse Logitech G500 || remote iDRAC KVM console
Keyboard Logitech G510 || remote iDRAC KVM console
Software Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0
Benchmark Scores Over 9000 on the scouter
Is the PSU turned on?
 

matteumayo

New Member
Joined
Feb 17, 2011
Messages
172 (0.04/day)
System Name derp
Processor Athlon II X4 2.8GHz
Motherboard ASROCK (exact model number not readily available)
Cooling Lots of fans?
Memory 4gb DDR3 G-Skill
Video Card(s) PowerColor 1gb 5850 hd
Storage 650gb Seagate
Display(s) Westington 19" 1440x900
Case Some Cooler Master case
Power Supply hec ORION 585w
Software Windows 7 64-bit
I think it s the front bus connectors... I found these unplugged wires:

HDD LED
RESET SW
POWER SW

Where do these go? They're all 2x1 and I don't see any 2x1 slots.
 
Joined
Jul 20, 2008
Messages
4,016 (0.70/day)
Location
Ohio
System Name Desktop|| Virtual Host 0
Processor Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads)
Motherboard ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset)
Cooling Corsair Hydro H100 || Stock hotplug fans and passive heatsinks
Memory 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs
Video Card(s) MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care
Storage Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure
Display(s) ViewSonic VA2349S || remote iDRAC KVM console
Case Antec P280 || Dell PowerEdge R710
Audio Device(s) HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care
Power Supply SeaSonic X650 Gold || 2x870w hot-swappable
Mouse Logitech G500 || remote iDRAC KVM console
Keyboard Logitech G510 || remote iDRAC KVM console
Software Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0
Benchmark Scores Over 9000 on the scouter
I think it s the front bus connectors... I found these unplugged wires:

HDD LED
RESET SW
POWER SW

Where do these go? They're all 2x1 and I don't see any 2x1 slots.
Yeah, that's definitely the problem. Look up your motherboard's manual online and it should have the pinout.
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,409 (4.47/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
bottom right hand corner of the motherboard. Look closely they may even be labeled on the motherboard.

I'm guessing by the blue in that image its a gigabyte motherboard. Google the name of the board and the word manual, it will show exactly where they go;)
 
Top